I assume you also have the KAT3. The sub-rx can either be hooked up to
the KAT3 or the AUX RF(bnc) connector, but not both. When done, there
is a TMP cable that is connected to the KAT3 or AUX RF and one of the
two is not connected to the sub-rx. You might have missed the step
where you attached that extra cable to its chassis connector. See
Fig. 4 on page 43 in the owners manual. Unless you plan to have a
receive-only antenna, the dotted line is normally not attached to your
sub-rx.
Eric
WB7SDE
On Mon, Jun 16, 2014, at 11:11 AM, N1IX wrote:
I just completed assembling a K3 with the sub-receiver option.
I have an extra 12 TMP cable and I can't figure out where it goes.
The K3 and sub-rx seem to work correctly.
Dave N1IX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to e...@evross.com
--
Eric Ross
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
