Re: [Elecraft] Getting the sub to work on 20M
Did the VCO calibration on the Sub receiver go OK? On 1/26/2012 8:26 PM, Cady, Fred wrote: Hi Gary, Sure sounds like the sub receiver is using a different antenna than the main when on 20 meters. The antenna configuration is kept on a per-band basis so it could be different on 20 than on the other bands. What I'd think I'd do is tap AB twice to make sure all the filters are the same in each receiver (maybe try some different filter width settings to make sure something hasn't gone wrong with the sub rx's filter configuration). Then make sure the sub is using the same antenna as the main. In B-Set, tap ANT to select ANT1 or ANT2, which ever is being used by the main. If not in B-Set, holding RX ANT will show MAIN or AUX for the sub rx. You want MAIN. That's about all I can think of. 73 and cheers, Fred KE7X The Elecraft K3; Design, Configuration and Operation www.ke7x.com -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gary Smith Sent: Thursday, January 26, 2012 9:02 PM To: Elecraft@mailman.qth.net Subject: Re: [Elecraft] Getting the sub to work on 20M I've looked through the manual (PDF version searched memory and antenna sub) and I can't seem to find anything that helps me in this problem. When I go to B Set to configure the sub Rx when I'm on 20M, nothing I do gets the sub Rx to work regardless of the antenna I'm using. I hear a loud hiss but nowhere do I get Rf with the sub on 20M. All other bands I do. Anyone have any specific suggestions what I can try to get the sub working on 20? Thanks Gary KA1J 20m probably has the wrong antenna in it's memory GB 73 K5OAI Sam Morgan On 1/26/2012 2:43 PM, Gary Smith wrote: K3 sub Rx installed. I rarely use the Rx antenna on the upper bands but today went to work TN2T on 20 SSB to work split and discovered I don't hear anything Rf wise coming from the sub Rx. I have no problems with the sub hearing independently on the other bands used it to find the right split on 10M it works fine on the lower bands, seems like it's confined to 20M. Any ideas if there's anything I can check to see if it's not set up right? Thanks, Gary KA1J __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Getting the sub to work on 20M
K3 sub Rx installed. I rarely use the Rx antenna on the upper bands but today went to work TN2T on 20 SSB to work split and discovered I don't hear anything Rf wise coming from the sub Rx. I have no problems with the sub hearing independently on the other bands used it to find the right split on 10M it works fine on the lower bands, seems like it's confined to 20M. Any ideas if there's anything I can check to see if it's not set up right? Thanks, Gary KA1J __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Getting the sub to work on 20M
I've looked through the manual (PDF version searched memory and antenna sub) and I can't seem to find anything that helps me in this problem. When I go to B Set to configure the sub Rx when I'm on 20M, nothing I do gets the sub Rx to work regardless of the antenna I'm using. I hear a loud hiss but nowhere do I get Rf with the sub on 20M. All other bands I do. Anyone have any specific suggestions what I can try to get the sub working on 20? Thanks Gary KA1J 20m probably has the wrong antenna in it's memory GB 73 K5OAI Sam Morgan On 1/26/2012 2:43 PM, Gary Smith wrote: K3 sub Rx installed. I rarely use the Rx antenna on the upper bands but today went to work TN2T on 20 SSB to work split and discovered I don't hear anything Rf wise coming from the sub Rx. I have no problems with the sub hearing independently on the other bands used it to find the right split on 10M it works fine on the lower bands, seems like it's confined to 20M. Any ideas if there's anything I can check to see if it's not set up right? Thanks, Gary KA1J __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Getting the sub to work on 20M
Hi Gary, Sure sounds like the sub receiver is using a different antenna than the main when on 20 meters. The antenna configuration is kept on a per-band basis so it could be different on 20 than on the other bands. What I'd think I'd do is tap AB twice to make sure all the filters are the same in each receiver (maybe try some different filter width settings to make sure something hasn't gone wrong with the sub rx's filter configuration). Then make sure the sub is using the same antenna as the main. In B-Set, tap ANT to select ANT1 or ANT2, which ever is being used by the main. If not in B-Set, holding RX ANT will show MAIN or AUX for the sub rx. You want MAIN. That's about all I can think of. 73 and cheers, Fred KE7X The Elecraft K3; Design, Configuration and Operation www.ke7x.com -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Gary Smith Sent: Thursday, January 26, 2012 9:02 PM To: Elecraft@mailman.qth.net Subject: Re: [Elecraft] Getting the sub to work on 20M I've looked through the manual (PDF version searched memory and antenna sub) and I can't seem to find anything that helps me in this problem. When I go to B Set to configure the sub Rx when I'm on 20M, nothing I do gets the sub Rx to work regardless of the antenna I'm using. I hear a loud hiss but nowhere do I get Rf with the sub on 20M. All other bands I do. Anyone have any specific suggestions what I can try to get the sub working on 20? Thanks Gary KA1J 20m probably has the wrong antenna in it's memory GB 73 K5OAI Sam Morgan On 1/26/2012 2:43 PM, Gary Smith wrote: K3 sub Rx installed. I rarely use the Rx antenna on the upper bands but today went to work TN2T on 20 SSB to work split and discovered I don't hear anything Rf wise coming from the sub Rx. I have no problems with the sub hearing independently on the other bands used it to find the right split on 10M it works fine on the lower bands, seems like it's confined to 20M. Any ideas if there's anything I can check to see if it's not set up right? Thanks, Gary KA1J __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html