Re: [Elecraft] How do I turn OFF my K3 remotely
John You can send the PS0 command from HRD: MacrosDisplayCAT Comands ( PS0). You will hear that the K3 audio stops and you can then switch OFF the K3 by briefly shorting ACC pin 8 to ground. I use GSM SMS to do that (and subsequently to switch OFF the PSU). An IP power switch may be simpler, but I like to be able to switch everything OFF also if my router goes dead. One slight problem is that you need to be sure that pin8 has been grounded and the K3 has been switched OFF before you switch OFF the PSU. I do that by very carefully listening to the audio (Skype or IP-Sound). But in some cases there may be some delay in delivery of SMS and it may be difficult to ensure that pin 8 has really been shorted ( and you may want to request the relay status by yet another SMS!) But there is a very weak change in the audio noise level when pin8 is pulled to ground and when you hear that you know you can safely switch OFF the PSU. If someone from Elecraft reads this, I suggest to include in a future firmware upgrade something which makes the K3 audio make a beep when pin 8 is pulled down and K3 switches OFF. 73 Paul/OZ4UN Den 25/10/2014 kl. 04.56 skrev Don Wilhelm w3...@embarqmail.com: John, I don't know if or how that HRD does it, but remote power off is available if the software issues a PS0; command to the K3. Note that a powered off K3 is not listening to commands, there is no way to turn the K3 on via RS-232 command. To turn the K3 back on remotely, an external device must pull the ACC connector pin 8 to ground. That may require additional hardware at the remote site. 73, Don W3FPR On 10/24/2014 10:33 PM, John K9UWA wrote: Can someone tell me how to turn OFF my K3 radio remotely through HRD. All I could find in the archives was this simple statement. From HRD If one wants to get fancy, you can even shut down the K3 using the Power off command through the serial communications port, and then shut down the computer too. Well no other explanation was given. So that might be fine for some computer expert but doesn't tell me anything other than yes it is possible. Can someone point me to a step by step instructions on how to turn off the K3 radio by remote? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to p...@tele.gl __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] How do I turn OFF my K3 remotely
Thanks to Paul and Don problem is solved. From HRD hit MACROSDisplayCAT and add the definition and the command PS0 in HRD it automatically adds the ; semicolon to the macro. I already have on the computer an N8LP USB to analog relay board that switches some antennas and has one button to TURN ON the radio by grounded briefly pin8 of the ACC socket. Thanks guys John k9uwa John Goller, K9UWA Jean Goller, N9PXF Antique Radio Restorations k9...@arrl.net Visit our Web Site at: http://www.JohnJeanAntiqueRadio.com 4836 Ranch Road Leo, IN 46765 USA 1-260-637-6426 --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] How do I turn OFF my K3 remotely
Can someone tell me how to turn OFF my K3 radio remotely through HRD. All I could find in the archives was this simple statement. From HRD If one wants to get fancy, you can even shut down the K3 using the Power off command through the serial communications port, and then shut down the computer too. Well no other explanation was given. So that might be fine for some computer expert but doesn't tell me anything other than yes it is possible. Can someone point me to a step by step instructions on how to turn off the K3 radio by remote? Thanks John k9uwa John Goller, K9UWA Jean Goller, N9PXF Antique Radio Restorations k9...@arrl.net Visit our Web Site at: http://www.JohnJeanAntiqueRadio.com 4836 Ranch Road Leo, IN 46765 USA 1-260-637-6426 --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] How do I turn OFF my K3 remotely
John, I don't know if or how that HRD does it, but remote power off is available if the software issues a PS0; command to the K3. Note that a powered off K3 is not listening to commands, there is no way to turn the K3 on via RS-232 command. To turn the K3 back on remotely, an external device must pull the ACC connector pin 8 to ground. That may require additional hardware at the remote site. 73, Don W3FPR On 10/24/2014 10:33 PM, John K9UWA wrote: Can someone tell me how to turn OFF my K3 radio remotely through HRD. All I could find in the archives was this simple statement. From HRD If one wants to get fancy, you can even shut down the K3 using the Power off command through the serial communications port, and then shut down the computer too. Well no other explanation was given. So that might be fine for some computer expert but doesn't tell me anything other than yes it is possible. Can someone point me to a step by step instructions on how to turn off the K3 radio by remote? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com