Re: [Elecraft] Internal 2M xvtr in K3s
My dealer-installed 2 M transverter in K3 can be adjusted to outputs between 1W and 10W. Vy 73 de OZ1CCM, Kel __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Internal 2M xvtr in K3s
As supplied, both my k3 internal transverters with my K3 (notS) produced 6.5w at 145Mhz and 8.5W at 147MHz. After discussion with Elecraft support, and some coil squeezing both now produce 9w at 144.3Mhz (enough to drive my LDMOS amp) and 6w at 147MHz (not a problem as the upper part of the band is now of no interest) What is more annoying with the internal xverter is that the power knob when fully clockwise produces 9W, but when fully counterclockwise it still produces 1W (ie you cant reduce it to zero). (on no other band on a k3 can you not reduce the output to zero) If you set the xv power to -10dB fully, counterclockwise produces 0 output power but 1 "notch" clockwise and all higher settings produces 1W. The XV 1mW also has the same dynamic range issue. The problem was raised with Elecraft support a year ago but the solution is still awaited Dave G4FRE Just setting up my K3s The 2M xvtr will only give me about 5W max output not 10W. This was a factory installed option, and I don't want to go through a re cal right away. I also need to be able to adjust the 2M output from 1-10 W as a driver for my PA for EME. I find that the power adj on the K3s only allows me to reduce the full output of 5W to 0 as one step as i reduce the IF drive level in small amounts. So the 2M output is either 0 or 5W with little adjustment between. Any ideas? Howard AE3T __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Internal 2M xvtr in K3s
Hi Howard, Mine will give only just about 5 W out as well. Quite disappointing. Cheers, Glen VK1FB On Thursday, October 15, 2015, Howard Sherer wrote: > Just setting up my K3s > The 2M xvtr will only give me about 5W max output not 10W. This was a > factory installed option, and I don't want to go through a re cal right > away. > > I also need to be able to adjust the 2M output from 1-10 W as a driver for > my PA for EME. I find that the power adj on the K3s only allows me to > reduce the full output of 5W to 0 as one step as i reduce the IF drive > level in small amounts. So the 2M output is either 0 or 5W with little > adjustment between. > > Any ideas? > > Howard AE3T > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to glen.t...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Internal 2M xvtr in K3s
Just setting up my K3s The 2M xvtr will only give me about 5W max output not 10W. This was a factory installed option, and I don't want to go through a re cal right away. I also need to be able to adjust the 2M output from 1-10 W as a driver for my PA for EME. I find that the power adj on the K3s only allows me to reduce the full output of 5W to 0 as one step as i reduce the IF drive level in small amounts. So the 2M output is either 0 or 5W with little adjustment between. Any ideas? Howard AE3T __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com