Re: [Elecraft] K-3 ERR PL1
Thanks for the input. I recalibrated and the problem actually got worse. The radio didnt reset itself this morning, just siting there dead like a doornail. Im using the latest software update. Phil & Debbie Salas wrote: "Hmm my rig has been working ok since the orginal build problems with the txco. The past couple of times the radio has been turned on I get ERR PLL1. Cant remember exactly what that means. The problem seemed to "self" correct after 10-20 sec of being on rx came back and error message disappeared." I had this problem after one of the earlier software updates (one that improved the VCO range/calibration). I re-cal'd the VCO and everything worked fine. I also re-cal'd both A & B VCOs again when I received the KRX3 and updated to the latest software. Phil - AD5X ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K-3 ERR PL1
"Hmm my rig has been working ok since the orginal build problems with the txco. The past couple of times the radio has been turned on I get ERR PLL1. Cant remember exactly what that means. The problem seemed to "self" correct after 10-20 sec of being on rx came back and error message disappeared." I had this problem after one of the earlier software updates (one that improved the VCO range/calibration). I re-cal'd the VCO and everything worked fine. I also re-cal'd both A & B VCOs again when I received the KRX3 and updated to the latest software. Phil - AD5X ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K-3 ERR PL1
On all bands. Recalibrated the VCO and got E 5. ERR VC 4. After 45 sec there was a change in the background noise. At first the rx seemed way dead, then there was an increase in noise but no signals being received. It might be time to send the radio to Elecraft because I think there is some other problem than the TXCO problem that showed up at first construction. Thom LaCosta wrote: At 09:38 PM 09/15/08, Mike Kasrich wrote: Hmm my rig has been working ok since the orginal build problems with the txco. The past couple of times the radio has been turned on I get ERR PLL1. Cant remember exactly what that means. The problem seemed to "self" correct after 10-20 sec of being on rx came back and error message disappeared. On all bands? Mine only does that on 6 meters, which I don't think I will ever use... 73, Thom k3hrn ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K-3 ERR PL1
At 09:38 PM 09/15/08, Mike Kasrich wrote: Hmm my rig has been working ok since the orginal build problems with the txco. The past couple of times the radio has been turned on I get ERR PLL1. Cant remember exactly what that means. The problem seemed to "self" correct after 10-20 sec of being on rx came back and error message disappeared. On all bands? Mine only does that on 6 meters, which I don't think I will ever use... 73, Thom k3hrn ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K-3 ERR PL1
Hmm my rig has been working ok since the orginal build problems with the txco. The past couple of times the radio has been turned on I get ERR PLL1. Cant remember exactly what that means. The problem seemed to "self" correct after 10-20 sec of being on rx came back and error message disappeared. Thoughts? Mike/aj9c ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com