[Elecraft] K2 #4948 snag
On page 26 right coluum last instruction reads Place two 3/4 (19mm) spacers over the leads of each back light LED as shown in Figure 5-9 - Now to the best of my knowledge NO SPACERS such as those described fig 5-9 were in the parts list. Unless it is the two 8mm x 8mm square black pads. and these need two be split in half and stacked to get the required 1/8 spacing on the diffuser. Thanks for any help... de rc kc5wa -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.322 / Virus Database: 267.4.0 - Release Date: 6/1/2005 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K2 #4948 snag
RC KC5WA wrote on 06/01/05 09:50 ET: On page 26 right coluum last instruction reads Place two 3/4 (19mm) spacers over the leads of each back light LED as shown in Figure 5-9 - Now to the best of my knowledge NO SPACERS such as those described fig 5-9 were in the parts list. Unless it is the two 8mm x 8mm square black pads. and these need two be split in half and stacked to get the required 1/8 spacing on the diffuser. Thanks for any help... RC, The spacers are the little pieces you previously will have snapped off of the switch spacing tool. 73, Mike AB3AP ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com