Re: [Elecraft] K2 on digital modes questions
I should have also added that the center frequency of the filters needs to be set at 1000Hz. -- R. Kevin Stover AC0H __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K2 on digital modes questions
On Sat, 16 Jul 2011 14:53:07 -0400 "Paul Huff" wrote: > I just added the SSB board to my K2 and it seems to be working > great. (I made a 40-meter QSO and was given a report of "nice crisp > audio.") I'm not an SSB operator and my real goal for adding this > option is to be able to work some of the digital modes. I have 3 > quick questions... > > 1. Is there any advantage to using the RTTY mode as opposed to the > SSB mode on the K2? Yes, setting up the RTTY filters will allow you to narrow down the passband to fight QRM while coying digi mode signals. > > 2. If I use the RTTY mode, do I need to change the filter settings? > Currently they show 2.2, 2.0, 1.8, and 1.6 as default values without > any setup from me. (I setup my SSB filters to OP1, OP1, 1.8, and 0.7 > with the thought that the 0.7 might be useful in some digital > situations.) The RTTY filters are separate from the SSB filters so the changes you make to them have no effect on the SSB filters. They have to be activated from the secondary menu. Setup the first RTTY filter the same as the first SSB filter so you get a full waterfall while tuning around and clicking. I have the rest of mine setup at 1K, 700Hz and 300Hz. -- R. Kevin Stover AC0H __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K2 on digital modes questions
I just added the SSB board to my K2 and it seems to be working great. (I made a 40-meter QSO and was given a report of "nice crisp audio.") I'm not an SSB operator and my real goal for adding this option is to be able to work some of the digital modes. I have 3 quick questions... 1. Is there any advantage to using the RTTY mode as opposed to the SSB mode on the K2? 2. If I use the RTTY mode, do I need to change the filter settings? Currently they show 2.2, 2.0, 1.8, and 1.6 as default values without any setup from me. (I setup my SSB filters to OP1, OP1, 1.8, and 0.7 with the thought that the 0.7 might be useful in some digital situations.) 3. I configured my K2 microphone connector for an Icom HM-12 microphone (the only one that I own) which requires a small bias voltage on AF through a 10k resistor. Is this bias voltage likely to cause me any trouble when I hook up my interface (a "Rascal" from K4ABT)? ... Actually, I think that I have already answered this question by looking at the schematic for the Rascal interface. The AF connects through a capacitor to an audio level pot across an isolation transformer. That capacitor should block the DC bias so I don't think that I will need to reconfigure the microphone connector in the K2. Does this make sense? Thank you ahead of time for any and all comments to any of my questions! 73, Paul - N8XMS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
