[Elecraft] K3 Beta Firmware Release -- MCU Revision 2.22
Loaded latest Beta yesterday and it works well but when using internal memory to call CQ on CW the transmission is interrupted if/when I touch the DISP button. (When I tap the DISP button again transmission starts again from the point of interrupt). I cannot recall that happening with latest ordinary F/W, maybe I am wrong - anyway no big issue. Would like comments from anyone still using latest regular release. Thank you in advance Len SM7BIC ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Beta Firmware Release -- MCU Revision 2.22
Lennart, This problem has been reportedalready, and the same thing happens with the MENU button and SPEED/MIC and CMP/PWR. The problem wil be solved in the next future I think. 73 's Steef PA2A K3 #1184 - Original Message - From: Lennart Michaëlsson [EMAIL PROTECTED] To: Elecraft Reflector elecraft@mailman.qth.net Sent: Sunday, August 03, 2008 7:51 PM Subject: [Elecraft] K3 Beta Firmware Release -- MCU Revision 2.22 Loaded latest Beta yesterday and it works well but when using internal memory to call CQ on CW the transmission is interrupted if/when I touch the DISP button. (When I tap the DISP button again transmission starts again from the point of interrupt). I cannot recall that happening with latest ordinary F/W, maybe I am wrong - anyway no big issue. Would like comments from anyone still using latest regular release. Thank you in advance Len SM7BIC ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Beta Firmware Release -- MCU Revision 2.22
Hi all, Out of interest I thought I would try the new feature. I only have the 2.7kHz filter but people noticed the difference when I swtched. I did however get a ERR TXF message when I switch it on and TX. it transmits OK but gives the message. Anyone else seeing this? 73 Ian -- Ian J Maude, G0VGS SysOp GB7MBC DX Cluster Member RSGB, GQRP K2 #4044 |K3 #455 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Beta Firmware Release -- MCU Revision 2.22
You have to use the 6 KHz filter for TX on ESSB. You're TX is probably restricted on audio bandwidth with the 2.7 filter. From hfnotes.rtf for 2.23: * ESSB (EXTENDED SINGLE SIDEBAND) ADDED: Allows the K3 to transmit in SSB modes at a bandwidth of up to about 4 kHz. Requires a 6 kHz crystal filter on the RF board. To use ESSB: (1) Make sure the 6 kHz filter is configured correctly for AM transmit; switch to AM mode, then specify this filter using CONFIG:FLTX AM. (2) Locate CONFIG:TX ESSB. Select the desired extended bandwidth for SSB ransmit (3.0 to 4.0 kHz) using VFO A. Then tap1 on the keypad to turn ESSB on/off. When on, the + icon in the mode area will turn on. 73, matt, W6NIA On Sun, 03 Aug 2008 23:15:47 +0100, you wrote: Hi all, Out of interest I thought I would try the new feature. I only have the 2.7kHz filter but people noticed the difference when I swtched. I did however get a ERR TXF message when I switch it on and TX. it transmits OK but gives the message. Anyone else seeing this? 73 Ian ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
