Re: [Elecraft] K3 Beta firmware rev. 2.72: updated DVR support, etc.
David Ferrington, M0XDF wrote: Which playback? Message playback or the RX loop? I would guess you mean Message playback and I would like that to stop if XMIT or a PTT line is keyed too. Can this be added as a firmware upgrade when the message chaining is included Wayne? 73 de M0XDF, K3 #174 I am talking about any time I am transmitting with it David. If I am in a contest I want to be able to simply key the mic and for that to stop the DVR transmission with or without chaining. 73 Ian -- Ian J Maude, G0VGS SysOp GB7MBC DX Cluster Member RSGB, GQRP K2 #4044 |K3 #455 http://www.amateurradiotraining.org ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Beta firmware rev. 2.72: updated DVR support, etc.
Which playback? Message playback or the RX loop? I would guess you mean Message playback and I would like that to stop if XMIT or a PTT line is keyed too. Can this be added as a firmware upgrade when the message chaining is included Wayne? 73 de M0XDF, K3 #174 -- He who asks is a fool for five minutes, but he who does not ask remains a fool forever. -Chinese proverb On 10 Dec 2008, at 08:26, Ian Maude wrote: wayne burdick wrote: K3 beta-test firmware revision 2.72 (with DSP rev 1.98) is now available. Anyone who has the KDVR3 (Digital Voice Recorder) installed will need this revision to use the DVR. We'll be making further improvements to DVR functions in later releases. Full details appear below. Thanks Wayne, I am looking forward to getting my DVR :) I notice stopping playback is via the front panel of the radio. Can play also be interrupted by PTT? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Beta firmware rev. 2.72: updated DVR support, etc.
wayne burdick wrote: K3 beta-test firmware revision 2.72 (with DSP rev 1.98) is now available. Anyone who has the KDVR3 (Digital Voice Recorder) installed will need this revision to use the DVR. We'll be making further improvements to DVR functions in later releases. Full details appear below. Thanks Wayne, I am looking forward to getting my DVR :) I notice stopping playback is via the front panel of the radio. Can play also be interrupted by PTT? 73 Ian -- Ian J Maude, G0VGS SysOp GB7MBC DX Cluster Member RSGB, GQRP K2 #4044 |K3 #455 http://www.amateurradiotraining.org ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 Beta firmware rev. 2.72: updated DVR support, etc.
K3 beta-test firmware revision 2.72 (with DSP rev 1.98) is now available. Anyone who has the KDVR3 (Digital Voice Recorder) installed will need this revision to use the DVR. We'll be making further improvements to DVR functions in later releases. Full details appear below. Please send any problem reports to [EMAIL PROTECTED] For instructions on how to load beta firmware, please see: http://www.elecraft.com/K3/k3_software.htm 73, Wayne N6KR * * * MCU 2.72 / DSP 1.98, 12-9-2008 Misc. Changes: * LINE OUT INCLUDES TX AUDIO: LINE OUT (nor menu setting) now includes transmit sidetone and speech/data monitor audio. * IMPROVED TX PASSBAND FLATNESS FOR PSK31: When operating in PSK31 mode via a PC, high-pitched audio tones are no longer attenuated more than low tones. Support for Digital Voice Recorder option (KDVR3): Note: The following information is more accurate than the DVR instructions in the K3 rev D owner’s manual. * DVR ICON: The DVR icon (dual arrows--above the S-meter) turns on whenever the DVR is in use. The icon flashes slowly during all record operations, and quickly during play. * DVR TX MESSAGES: Message record, play and repeat are functional. (Message chaining will be added in a subsequent release.) To start voice message record, tap REC, then tap M1-M4. Record will start immediately. Tap M1-M4 again to stop recording. To play a voice message, tap M1-M4. To repeat a voice message (e.g., a CQ), *hold* M1-M4 rather than tap. Message play or repeat can be cancelled at any time by tapping REC. * DVR RX LOOP: Hold AF REC to start receive-audio recording. Hold AF REC again to stop record. Up to 90 seconds of audio can be recorded; beyond this, earlier audio will be overwritten. Hold AF PLAY to start playback; press any switch to stop. VFO B will show the playback position in seconds, relative to the most-recently recorded audio segment. During PLAY, you can move forward/backward through RX audio loop buffer by rotating VFO B. An asterisk (*) beside the seconds counter shows the extent of the most recently recorded segment. Note: It is OK to record received audio continuously; this might be useful as a way of catching audio events that you wish to examine later. Record will continue even if you transmit. However, at present, silence is recorded for the duration of any transmission. * DVR RX LOOP PLAY IN TX MODE. First, enter voice transmit mode by holding PTT or tapping XMIT. Then hold AF PLAY to start playback, and press any switch to stop. CMP (speech compression) is automatically disabled. Note: Playback volume of the RX loop buffer during TX mode is not yet adjustable. For software developers: * VOX STATUS ADDED TO IC CMD (separate flags for CW keying ‘VOX’ and voice/data audio VOX). --- http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com