Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride
OK Simon. I added support for AG$, IS, MD$, OM, RG$, RVA, RVF and RVR to LP-Bridge. That seems to allow HRD to work properly, at least for the commands that you appear to have added to the main polling routine. I will look through the dev reflector for further new commands that need to be added. I pass all your new SET commands through, so I only need to be concerned about new GET commands at the moment. After a little testing, I will release this version, but I will leave the current version on my website as well for those who are not running the K3 beta firmware. 73, Larry N8LP - Original Message - From: Simon (HB9DRV) [EMAIL PROTECTED] To: Larry Phipps [EMAIL PROTECTED]; elecraft@mailman.qth.net Sent: Monday, October 06, 2008 12:41 AM Subject: Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride Hi Larry, Here's 1989 - http://mannindustries.net/hrd/public/betas/041/HRDv041b1989_Full.exe This implements everything available in Wayne's CAT support, as the radio stays in K31 all the time I hope your bridge is no longer broken - let's see. Simon Brown, HB9DRV www.ham-radio-deluxe.com - Original Message - From: Simon (HB9DRV) [EMAIL PROTECTED] New kit in about 30 minutes, I'll be in K31 mode all the time (as pre-1988) with the exception of the FW command where I'll send K30,FW;K31;. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride
Hi Larry, That's it - the only commands not used in Polling are those used when you press the Menu button to get at all that Config stuff. Are you on the K3 Software list? If so we can co-ordinate this kind of thing there, I don't expect any major updates like build 1988 / 1989 until Wayne gets the channel support working. Simon Brown, HB9DRV www.ham-radio-deluxe.com - Original Message - From: Larry Phipps [EMAIL PROTECTED] OK Simon. I added support for AG$, IS, MD$, OM, RG$, RVA, RVF and RVR to LP-Bridge. That seems to allow HRD to work properly, at least for the commands that you appear to have added to the main polling routine. I will look through the dev reflector for further new commands that need to be added. I pass all your new SET commands through, so I only need to be concerned about new GET commands at the moment. After a little testing, I will release this version, but I will leave the current version on my website as well for those who are not running the K3 beta firmware. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride
Hi Larry All, The K3 commands used in HRD are here: http://www.ham-radio-deluxe.com/Portals/1/Documentation/K3%20-%20Supported%20Commands.txt This data comes out of HRD, really added for me to see what I have actually implemented. Simon Brown, HB9DRV www.ham-radio-deluxe.com - Original Message - From: Larry Phipps [EMAIL PROTECTED] Hi Simon. I have not implemented the $ commands yet, or some of the other new commands discussed on the developer's reflector. I plan to do that when I get caught up on orders. Because the K3 might be talking to up to five different applications, I generally don't allow meta commands to be passed to the K3. I keep it in one mode for K2* and K3* commands. I can add this as an option for one main program, but that could cause problems with other programs. I could also add a slew of commands to fill in the virtual K3 that I create so that it can answer either K30 or K31 commands, but that's a lot of work that will have to wait. I have about 45 GET commands implemented, but I think there have been at least a dozen added in the last few weeks by Wayne. Most SET commands are passed on, except for some of the dev commands and meta commands. In the meantime, I will download and test your latest beta to see what's going on. It seems that it should still work at the level it used to, even without the added command support. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride
Oh dear - looks like it's a job for Larry :-( Simon Brown, HB9DRV www.ham-radio-deluxe.com - Original Message - From: Doug Alspaugh [EMAIL PROTECTED] Not working here yet. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] K3 HRD lastest beta not working with LP-Bride
I am using K3 with firmware DSP 1.92 and MCU 2.46 (latest firmware). I am also using LP-Bridge v0.9.82. Everything is working fine here. Bob Serwy - N9RS -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Doug Alspaugh Sent: Monday, October 06, 2008 4:36 AM To: Simon (HB9DRV) Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride Simon, Not working here yet. 73 Doug N3QW - Original Message - From: Simon (HB9DRV) [EMAIL PROTECTED] To: Larry Phipps [EMAIL PROTECTED]; elecraft@mailman.qth.net Sent: Monday, October 06, 2008 12:41 AM Subject: Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride Hi Larry, Here's 1989 - http://mannindustries.net/hrd/public/betas/041/HRDv041b1989_Full.exe This implements everything available in Wayne's CAT support, as the radio stays in K31 all the time I hope your bridge is no longer broken - let's see. Simon Brown, HB9DRV www.ham-radio-deluxe.com - Original Message - From: Simon (HB9DRV) [EMAIL PROTECTED] New kit in about 30 minutes, I'll be in K31 mode all the time (as pre-1988) with the exception of the FW command where I'll send K30,FW;K31;. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride
Upgrade HRD to the latest and see if it is OK then? I am working fine with an early version too. 73 Doug N3QW - Original Message - From: Bob Serwy [EMAIL PROTECTED] To: 'Doug Alspaugh' [EMAIL PROTECTED]; elecraft@mailman.qth.net Sent: Monday, October 06, 2008 7:50 AM Subject: RE: [Elecraft] K3 HRD lastest beta not working with LP-Bride I am using K3 with firmware DSP 1.92 and MCU 2.46 (latest firmware). I am also using LP-Bridge v0.9.82. Everything is working fine here. Bob Serwy - N9RS -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Doug Alspaugh Sent: Monday, October 06, 2008 4:36 AM To: Simon (HB9DRV) Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride Simon, Not working here yet. 73 Doug N3QW - Original Message - From: Simon (HB9DRV) [EMAIL PROTECTED] To: Larry Phipps [EMAIL PROTECTED]; elecraft@mailman.qth.net Sent: Monday, October 06, 2008 12:41 AM Subject: Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride Hi Larry, Here's 1989 - http://mannindustries.net/hrd/public/betas/041/HRDv041b1989_Full.exe This implements everything available in Wayne's CAT support, as the radio stays in K31 all the time I hope your bridge is no longer broken - let's see. Simon Brown, HB9DRV www.ham-radio-deluxe.com - Original Message - From: Simon (HB9DRV) [EMAIL PROTECTED] New kit in about 30 minutes, I'll be in K31 mode all the time (as pre-1988) with the exception of the FW command where I'll send K30,FW;K31;. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride
Simon, Not working here yet. 73 Doug N3QW - Original Message - From: Simon (HB9DRV) [EMAIL PROTECTED] To: Larry Phipps [EMAIL PROTECTED]; elecraft@mailman.qth.net Sent: Monday, October 06, 2008 12:41 AM Subject: Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride Hi Larry, Here's 1989 - http://mannindustries.net/hrd/public/betas/041/HRDv041b1989_Full.exe This implements everything available in Wayne's CAT support, as the radio stays in K31 all the time I hope your bridge is no longer broken - let's see. Simon Brown, HB9DRV www.ham-radio-deluxe.com - Original Message - From: Simon (HB9DRV) [EMAIL PROTECTED] New kit in about 30 minutes, I'll be in K31 mode all the time (as pre-1988) with the exception of the FW command where I'll send K30,FW;K31;. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 HRD lastest beta not working with LP-Bride
Using HRD beta 1988 I have no comms with LP-Bridge. Reverting back to 1959 fixes the problem. Tried reinstalling with no luck. Anyone else try it? 1988 works fine with K3 if I connect direct, without LP-Bridge The virtual port on LP-Bridge shows very little action from HRD. 73 Doug N3QW___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride
Hi Mike, I don't see much, if any activity from HRD when I monitor the Virtual port. To bad some nice new features added. I am sure Simon will fix it. 73 Doug N3QW - Original Message - From: Mike Stevenso To: Doug Alspaugh Sent: Sunday, October 05, 2008 10:27 AM Subject: Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride Hi Doug I am seeing the same problem with latest beta of HRD. LP-Bridge is not passing the new software commands. Mike G8ALS - Original Message - From: Doug Alspaugh To: elecraft@mailman.qth.net Sent: Sunday, October 05, 2008 3:07 PM Subject: [Elecraft] K3 HRD lastest beta not working with LP-Bride Using HRD beta 1988 I have no comms with LP-Bridge. Reverting back to 1959 fixes the problem. Tried reinstalling with no luck. Anyone else try it? 1988 works fine with K3 if I connect direct, without LP-Bridge The virtual port on LP-Bridge shows very little action from HRD. 73 Doug N3QW ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.173 / Virus Database: 270.7.6/1709 - Release Date: 05/10/2008 09:20 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride
Hi, I don't have anything to do with the LP Bridge - I am sure Larry will look at it. To be honest I didn't know that there was a LP Bridge :-) All I can say is that HRD works fine with my K3 here, can anyone confirm this please? Simon Brown, HB9DRV www.ham-radio-deluxe.com - Original Message - From: Doug Alspaugh I don't see much, if any activity from HRD when I monitor the Virtual port. To bad some nice new features added. I am sure Simon will fix it.___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride
LP-Bride ??? Larry's come out with some great products, but that's a new one on me. If he's really produced a bride that promises to be compatible with all of our other radio equipment, that'll be a winner! Sorry, couldn't resist... ~Iain ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] K3 HRD lastest beta not working with LP-Bride
Check with N8LP. I suspect Simon is making use of one/more of the new commands that Larry is not supporting with the current version. HRD is very hard on a rig and interface as it polls for a lot of information. If third party hardware/software can survive HRD it can handle almost anything. 73, ... Joe, W4TV -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Doug Alspaugh Sent: Sunday, October 05, 2008 10:07 AM To: elecraft@mailman.qth.net Subject: [Elecraft] K3 HRD lastest beta not working with LP-Bride Using HRD beta 1988 I have no comms with LP-Bridge. Reverting back to 1959 fixes the problem. Tried reinstalling with no luck. Anyone else try it? 1988 works fine with K3 if I connect direct, without LP-Bridge The virtual port on LP-Bridge shows very little action from HRD. 73 Doug N3QW ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride
Also I am switching the K30 / K31 quite a bit so that I can use the various filtering options. Maybe Larry's not expecting this. Simon Brown, HB9DRV www.ham-radio-deluxe.com - Original Message - From: Joe Subich, W4TV [EMAIL PROTECTED] Check with N8LP. I suspect Simon is making use of one/more of the new commands that Larry is not supporting with the current version. HRD is very hard on a rig and interface as it polls for a lot of information. If third party hardware/software can survive HRD it can handle almost anything. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride
Even harder to produce one which would be compatible with a bride you already have!!! Couldn't resist either. 73, Bob K2TK Iain MacDonnell - K6IAM wrote: LP-Bride ??? Larry's come out with some great products, but that's a new one on me. If he's really produced a bride that promises to be compatible with all of our other radio equipment, that'll be a winner! Sorry, couldn't resist... ~Iain ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] K3 HRD lastest beta not working with LP-Bride
Also I am switching the K30 / K31 quite a bit so that I can use the various filtering options. Maybe Larry's not expecting this. That's certainly probable ... he may be in trouble supporting both modes depending on the way the K3 and PowerSDR behave. Is there anything in K30 than can't be handled by staying on K31? 73, ... Joe, W4TV -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Simon (HB9DRV) Sent: Sunday, October 05, 2008 11:40 AM To: [EMAIL PROTECTED]; 'Doug Alspaugh'; elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride Also I am switching the K30 / K31 quite a bit so that I can use the various filtering options. Maybe Larry's not expecting this. Simon Brown, HB9DRV www.ham-radio-deluxe.com - Original Message - From: Joe Subich, W4TV [EMAIL PROTECTED] Check with N8LP. I suspect Simon is making use of one/more of the new commands that Larry is not supporting with the current version. HRD is very hard on a rig and interface as it polls for a lot of information. If third party hardware/software can survive HRD it can handle almost anything. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride
Selecting filters - same as pressing the XFIL. I can change the code to toggle K30 / K31. I'll have to make 1989 available tomorrow as there's a glitch in the SSTV code. Larry - shout at me before pulling out your hair please. Simon Brown, HB9DRV www.ham-radio-deluxe.com - Original Message - From: Joe Subich, W4TV [EMAIL PROTECTED] That's certainly probable ... he may be in trouble supporting both modes depending on the way the K3 and PowerSDR behave. Is there anything in K30 than can't be handled by staying on K31? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride
Latest beta works fine here with LP-Bridge, using Xmlog in stead of HRD - Wim Doug Alspaugh wrote: Using HRD beta 1988 I have no comms with LP-Bridge. Reverting back to 1959 fixes the problem. Tried reinstalling with no luck. Anyone else try it? 1988 works fine with K3 if I connect direct, without LP-Bridge The virtual port on LP-Bridge shows very little action from HRD. 73 Doug N3QW ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com -- View this message in context: http://n2.nabble.com/K3-HRD-lastest-beta-not-working-with-LP-Bride-tp1298808p1299226.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride
Hi Simon. I have not implemented the $ commands yet, or some of the other new commands discussed on the developer's reflector. I plan to do that when I get caught up on orders. Because the K3 might be talking to up to five different applications, I generally don't allow meta commands to be passed to the K3. I keep it in one mode for K2* and K3* commands. I can add this as an option for one main program, but that could cause problems with other programs. I could also add a slew of commands to fill in the virtual K3 that I create so that it can answer either K30 or K31 commands, but that's a lot of work that will have to wait. I have about 45 GET commands implemented, but I think there have been at least a dozen added in the last few weeks by Wayne. Most SET commands are passed on, except for some of the dev commands and meta commands. In the meantime, I will download and test your latest beta to see what's going on. It seems that it should still work at the level it used to, even without the added command support. Larry N8LP Message: 22 Date: Sun, 5 Oct 2008 17:39:41 +0200 From: Simon (HB9DRV) [EMAIL PROTECTED] Subject: Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride To: [EMAIL PROTECTED], 'Doug Alspaugh' [EMAIL PROTECTED], elecraft@mailman.qth.net Message-ID: [EMAIL PROTECTED] Content-Type: text/plain; format=flowed; charset=iso-8859-1; reply-type=original Also I am switching the K30 / K31 quite a bit so that I can use the various filtering options. Maybe Larry's not expecting this. Simon Brown, HB9DRV www.ham-radio-deluxe.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride
Hi Larry, New kit in about 30 minutes, I'll be in K31 mode all the time (as pre-1988) with the exception of the FW command where I'll send K30,FW;K31;. Simon Brown, HB9DRV www.ham-radio-deluxe.com - Original Message - From: Larry Phipps [EMAIL PROTECTED] To: elecraft@mailman.qth.net Sent: Monday, October 06, 2008 2:51 AM Subject: Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride Hi Simon. I have not implemented the $ commands yet, or some of the other new commands discussed on the developer's reflector. I plan to do that when I get caught up on orders. Because the K3 might be talking to up to five different applications, I generally don't allow meta commands to be passed to the K3. I keep it in one mode for K2* and K3* commands. I can add this as an option for one main program, but that could cause problems with other programs. I could also add a slew of commands to fill in the virtual K3 that I create so that it can answer either K30 or K31 commands, but that's a lot of work that will have to wait. I have about 45 GET commands implemented, but I think there have been at least a dozen added in the last few weeks by Wayne. Most SET commands are passed on, except for some of the dev commands and meta commands. In the meantime, I will download and test your latest beta to see what's going on. It seems that it should still work at the level it used to, even without the added command support. Larry N8LP Message: 22 Date: Sun, 5 Oct 2008 17:39:41 +0200 From: Simon (HB9DRV) [EMAIL PROTECTED] Subject: Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride To: [EMAIL PROTECTED], 'Doug Alspaugh' [EMAIL PROTECTED], elecraft@mailman.qth.net Message-ID: [EMAIL PROTECTED] Content-Type: text/plain; format=flowed; charset=iso-8859-1; reply-type=original Also I am switching the K30 / K31 quite a bit so that I can use the various filtering options. Maybe Larry's not expecting this. Simon Brown, HB9DRV www.ham-radio-deluxe.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 HRD lastest beta not working with LP-Bride
Hi Larry, Here's 1989 - http://mannindustries.net/hrd/public/betas/041/HRDv041b1989_Full.exe This implements everything available in Wayne's CAT support, as the radio stays in K31 all the time I hope your bridge is no longer broken - let's see. Simon Brown, HB9DRV www.ham-radio-deluxe.com - Original Message - From: Simon (HB9DRV) [EMAIL PROTECTED] New kit in about 30 minutes, I'll be in K31 mode all the time (as pre-1988) with the exception of the FW command where I'll send K30,FW;K31;. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
