[Elecraft] K3 Utility and LP-Bridge - Correction
I have been corresponding recently with Dick Dievendorff about this. I am looking into allowing K3 Utility to work through LP-Bridge. The issue has to do with K3 Utility needing to be able to change one of the meta commands in the K3, which is normally blocked by LP-Bridge to prevent multiple applications from independently changing meta commands which might conflict with other apps. If I do this, it will add a check box for the VPort where K3 Utility is connected, and I would still strongly recommend that flashing of new firmware NOT be done through LP-Bridge. 73, Larry N8LP Date: Thu, 18 Feb 2010 11:01:57 -0800 (PST) From: Bob - W0GI b...@gotoloveland.com Subject: [Elecraft] K3 Utility and LP-Bridge - Correction To: elecraft@mailman.qth.net Message-ID: 1266519717347-4593636.p...@n2.nabble.com Content-Type: text/plain; charset=us-ascii While setting up LP-Bridge, I assumed the the K3 Utility would work ok as Test Communications worked ok, and the firmware page was showing my versions. But I have found other functions do no work. Looking at the LP-Bridge page I found this. Some commands are intenionally blocked altogether. For this reason, the K3 Utility should not be used with LP-Bridge. Mommy always told me to read the manual first. :) That said, my previous posts on using K3Util with LP-Bridge are incorrect. -- __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Utility and LP-Bridge - Correction
Thanks Larry, By the way, since I already had a Presonus Firebox, I am using it for the interface to the LP-PAN. I did find a mod (100K resistor), while poking around the unit, that lowers the spur about 20db. If you or anyone else has interest, I will try to find the picture I took and give details. The spur is still visible with pre-off and att-on, but with pre-on and att-off, it is below the noise. That said, I haven't recorded into the Firebox, so I don't know if the mod had any negative effect on the audio input. My guess would be no. 73, Bob -- View this message in context: http://n2.nabble.com/K3-Utility-and-LP-Bridge-Correction-tp4598240p4600893.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 Utility and LP-Bridge - Correction
While setting up LP-Bridge, I assumed the the K3 Utility would work ok as Test Communications worked ok, and the firmware page was showing my versions. But I have found other functions do no work. Looking at the LP-Bridge page I found this. Some commands are intenionally blocked altogether. For this reason, the K3 Utility should not be used with LP-Bridge. Mommy always told me to read the manual first. :) That said, my previous posts on using K3Util with LP-Bridge are incorrect. -- View this message in context: http://n2.nabble.com/K3-Utility-and-LP-Bridge-Correction-tp4593636p4593636.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html