[Elecraft] K3 default RTTY baud rate
What am I doing wrong? I use FSK D and it seems like the default baud rate is 75 bps when I check the setting in MD DATA. How can I set the K3 up so 45 bps is the default? 73, Paul K9NU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 default RTTY baud rate
Change it to 45 bps and it should remember. What am I doing wrong? I use FSK D and it seems like the default baud rate is 75 bps when I check the setting in MD DATA. How can I set the K3 up so 45 bps is the default? 73, Lyle KK7P __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 default RTTY baud rate
Do you change bands or modes using quick memories or M1-M4? Maybe you accidentally saved 75 baud in memory, and that's why it keeps coming back. Dave Hachadorian, K6LL Yuma, AZ -Original Message- From: Paul A DeFelice Sent: Friday, October 22, 2010 9:37 AM To: elecraft@mailman.qth.net Subject: [Elecraft] K3 default RTTY baud rate What am I doing wrong? I use FSK D and it seems like the default baud rate is 75 bps when I check the setting in MD DATA. How can I set the K3 up so 45 bps is the default? 73, Paul K9NU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 default RTTY baud rate
Hmm this is interesting. I set (saved) all my quick memories long ago (before the introduction of the 75 baud choice). I just checked all the RTTY memories and they are now set for 75 baud. I didn't change anything to make this happen (except upgrade firmware). K3 #3223 FW 4.12. Is 75 baud now default? I would hope not. Earl N5ZM.. On 10/22/2010 1:34 PM, Dave Hachadorian wrote: Do you change bands or modes using quick memories or M1-M4? Maybe you accidentally saved 75 baud in memory, and that's why it keeps coming back. Dave Hachadorian, K6LL Yuma, AZ -Original Message- From: Paul A DeFelice Sent: Friday, October 22, 2010 9:37 AM To: elecraft@mailman.qth.net Subject: [Elecraft] K3 default RTTY baud rate What am I doing wrong? I use FSK D and it seems like the default baud rate is 75 bps when I check the setting in MD DATA. How can I set the K3 up so 45 bps is the default? 73, Paul K9NU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 default RTTY baud rate
New K3s all have 45 baud as the default for all memories. K3s that were built before the associated firmware change may come up at 75 baud, requiring a one-time, per-memory or per-band change back to 45 (using the TEXT DEC switch). If copy is poor, the baud rate is probably wrong. Sorry for the inconvenience-- Wayne N6KR On Oct 22, 2010, at 6:41 PM, Earl wrote: Hmm this is interesting. I set (saved) all my quick memories long ago (before the introduction of the 75 baud choice). I just checked all the RTTY memories and they are now set for 75 baud. I didn't change anything to make this happen (except upgrade firmware). K3 #3223 FW 4.12. Is 75 baud now default? I would hope not. Earl N5ZM.. On 10/22/2010 1:34 PM, Dave Hachadorian wrote: Do you change bands or modes using quick memories or M1-M4? Maybe you accidentally saved 75 baud in memory, and that's why it keeps coming back. Dave Hachadorian, K6LL Yuma, AZ -Original Message- From: Paul A DeFelice Sent: Friday, October 22, 2010 9:37 AM To: elecraft@mailman.qth.net Subject: [Elecraft] K3 default RTTY baud rate What am I doing wrong? I use FSK D and it seems like the default baud rate is 75 bps when I check the setting in MD DATA. How can I set the K3 up so 45 bps is the default? 73, Paul K9NU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 default RTTY baud rate
Got it! - Done!! Thanks Wayne.. Earl N5ZM.. On 10/22/2010 9:10 PM, Wayne Burdick wrote: New K3s all have 45 baud as the default for all memories. K3s that were built before the associated firmware change may come up at 75 baud, requiring a one-time, per-memory or per-band change back to 45 (using the TEXT DEC switch). If copy is poor, the baud rate is probably wrong. Sorry for the inconvenience-- Wayne N6KR On Oct 22, 2010, at 6:41 PM, Earl wrote: Hmm this is interesting. I set (saved) all my quick memories long ago (before the introduction of the 75 baud choice). I just checked all the RTTY memories and they are now set for 75 baud. I didn't change anything to make this happen (except upgrade firmware). K3 #3223 FW 4.12. Is 75 baud now default? I would hope not. Earl N5ZM.. On 10/22/2010 1:34 PM, Dave Hachadorian wrote: Do you change bands or modes using quick memories or M1-M4? Maybe you accidentally saved 75 baud in memory, and that's why it keeps coming back. Dave Hachadorian, K6LL Yuma, AZ -Original Message- From: Paul A DeFelice Sent: Friday, October 22, 2010 9:37 AM To: elecraft@mailman.qth.net Subject: [Elecraft] K3 default RTTY baud rate What am I doing wrong? I use FSK D and it seems like the default baud rate is 75 bps when I check the setting in MD DATA. How can I set the K3 up so 45 bps is the default? 73, Paul K9NU __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- In every walk with nature, one receives far more than he seeks. John Muir.. Earl F. Smith - N5ZM PO Box 20065 White Hall, AR 71612-0065 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
