Re: [Elecraft] K3 vs. KX3 with wsjt-x
Make sure you are using only one PTT method. CAT or VOX but never both. I prefer CAT as any signal or any noise on the audio line will trip the VOX and thus hold it in transmit. Bob, K4TAX Sent from my iPhone > On Oct 21, 2018, at 11:04 AM, Bill Frantz wrote: > > I indeed had MIC BTN on, and turned it off. I the KX3 still didn't go into > receive when I pressed the "Halt Tx" button. (MIC BIAS was already off.) > > Another issue I didn't mention before seems to have gotten worse. Sometimes > pressing the "XMIT" button on the KX3 doesn't take it out of transmit mode. > When I press it it stays in transmit. Press it again and it still is in > transmit. It finally goes into receive when wsjt-x gets to its receive phase. > > I am still having problems developing a mental model of what is actually > happening here. Maybe I'll have to download the wsjt-s source code and start > reading code again. But that's what I retired from years ago. :-) > > 73 Bill AE6JV > >> On 10/20/18 at 3:35 PM, r...@mosslight.com (Robert Albano) wrote: >> >> Turning the MIC BTN off fixed the problem. Now Halt Tx stops the KX3 as >> well. >> >> Should MIC BIAS be off as well? >> >> 73 Robert K7RNA >> >>> On 2018 Oct, 20, at 3:26 PM, Robert Albano wrote: >>> >>> I have the same behavior: >>> KX3 >>> PX3 >>> SignaLink >>> MacBook Pro >>> CAT interface >>> On 2018 Oct, 20, at 2:21 PM, Bill Frantz wrote: I have noticed an significant difference between the way my K3 and KX3 work with wsjt-x. On the >> K3, the "Halt Tx" button immediately stops transmission on the radio. With >> the KX3, the radio remains in transmit mode, although the computer has >> stopped sending audio. I have to press the "XMIT" button on the radio to get >> it back to receive mode. It is as if the CAT command to take the radio out >> of transmit mode isn't being sent or is not being processed by the radio. Not that on both radios other actions which use the CAT interface, like changing bands from the >> wsjt-x UI, work correctly. The K3 has been upgraded to the internal sound card/RS232 interface from the K3S. The KX3 is being used with a USB <--> RS232 cable and a home brew audio interface using a >> mini-dongle USB sound "card". The computer in both cases is a MacBook Pro. Has anyone else experienced this issue? 73 Bill AE6JV - Bill Frantz| Government is not reason, it is not eloquence, it is force; like 408-356-8506 | a fire, a troublesome servant and a fearful master. Never for a www.pwpconsult.com | moment should it be left to irresponsible action. Geo Washington __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to r...@mosslight.com >>> >>> __ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Elecraft@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to r...@mosslight.com >> >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to fra...@pwpconsult.com >> > --- > Bill Frantz| Concurrency is hard. 12 out | Periwinkle > (408)356-8506 | 10 programmers get it wrong. | 16345 Englewood Ave > www.pwpconsult.com |- Jeff Frantz | Los Gatos, CA 95032 > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to rmcg...@blomand.net > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list:
Re: [Elecraft] K3 vs. KX3 with wsjt-x
I indeed had MIC BTN on, and turned it off. I the KX3 still didn't go into receive when I pressed the "Halt Tx" button. (MIC BIAS was already off.) Another issue I didn't mention before seems to have gotten worse. Sometimes pressing the "XMIT" button on the KX3 doesn't take it out of transmit mode. When I press it it stays in transmit. Press it again and it still is in transmit. It finally goes into receive when wsjt-x gets to its receive phase. I am still having problems developing a mental model of what is actually happening here. Maybe I'll have to download the wsjt-s source code and start reading code again. But that's what I retired from years ago. :-) 73 Bill AE6JV On 10/20/18 at 3:35 PM, r...@mosslight.com (Robert Albano) wrote: Turning the MIC BTN off fixed the problem. Now Halt Tx stops the KX3 as well. Should MIC BIAS be off as well? 73 Robert K7RNA On 2018 Oct, 20, at 3:26 PM, Robert Albano wrote: I have the same behavior: KX3 PX3 SignaLink MacBook Pro CAT interface On 2018 Oct, 20, at 2:21 PM, Bill Frantz wrote: I have noticed an significant difference between the way my K3 and KX3 work with wsjt-x. On the K3, the "Halt Tx" button immediately stops transmission on the radio. With the KX3, the radio remains in transmit mode, although the computer has stopped sending audio. I have to press the "XMIT" button on the radio to get it back to receive mode. It is as if the CAT command to take the radio out of transmit mode isn't being sent or is not being processed by the radio. Not that on both radios other actions which use the CAT interface, like changing bands from the wsjt-x UI, work correctly. The K3 has been upgraded to the internal sound card/RS232 interface from the K3S. The KX3 is being used with a USB <--> RS232 cable and a home brew audio interface using a mini-dongle USB sound "card". The computer in both cases is a MacBook Pro. Has anyone else experienced this issue? 73 Bill AE6JV - Bill Frantz| Government is not reason, it is not eloquence, it is force; like 408-356-8506 | a fire, a troublesome servant and a fearful master. Never for a www.pwpconsult.com | moment should it be left to irresponsible action. Geo Washington __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to r...@mosslight.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to r...@mosslight.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to fra...@pwpconsult.com --- Bill Frantz| Concurrency is hard. 12 out | Periwinkle (408)356-8506 | 10 programmers get it wrong. | 16345 Englewood Ave www.pwpconsult.com |- Jeff Frantz | Los Gatos, CA 95032 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 vs. KX3 with wsjt-x
It is not disabled automatically in Data A mode. I have looked and if I don’t set it purposefully it will remain at the last setting per band. I have macros that I use to toggle between voice operation and digital modes. I set the mic bias and mic btn menu items accordingly. Happy to proven wrong as I could then shorten my macros. But I have experimented and what I have written is based on my observations of the menu settings. Also, I found nothing in the KX3 operation manual to indicate mic bias or btn are disabled on Data A mode. Regards Brian VE3IBW On Sun, Oct 21, 2018 at 2:30 AM Walter Underwood wrote: > I think the mic bias is automatically disabled in DATA A mode. But I might > be wrong. > > wunder > K6WRU > Walter Underwood > CM87wj > http://observer.wunderwood.org/ (my blog) > > > On Oct 20, 2018, at 4:54 PM, Nr4c wrote: > > > > MIC BIAS should be OFF unless you are using a mic that requires it. Bias > has NO other use. > > > > Sent from my iPhone > > ...nr4c. bill > > > > > >> On Oct 20, 2018, at 6:35 PM, Robert Albano wrote: > >> > >> Turning the MIC BTN off fixed the problem. Now Halt Tx stops the KX3 > as well. > >> > >> Should MIC BIAS be off as well? > >> > >> 73 Robert K7RNA > >> > >>> On 2018 Oct, 20, at 3:26 PM, Robert Albano wrote: > >>> > >>> I have the same behavior: > >>> KX3 > >>> PX3 > >>> SignaLink > >>> MacBook Pro > >>> CAT interface > >>> > On 2018 Oct, 20, at 2:21 PM, Bill Frantz > wrote: > > I have noticed an significant difference between the way my K3 and > KX3 work with wsjt-x. On the K3, the "Halt Tx" button immediately stops > transmission on the radio. With the KX3, the radio remains in transmit > mode, although the computer has stopped sending audio. I have to press the > "XMIT" button on the radio to get it back to receive mode. It is as if the > CAT command to take the radio out of transmit mode isn't being sent or is > not being processed by the radio. > > Not that on both radios other actions which use the CAT interface, > like changing bands from the wsjt-x UI, work correctly. > > The K3 has been upgraded to the internal sound card/RS232 interface > from the K3S. > > The KX3 is being used with a USB <--> RS232 cable and a home brew > audio interface using a mini-dongle USB sound "card". > > The computer in both cases is a MacBook Pro. > > Has anyone else experienced this issue? > > 73 Bill AE6JV > > > - > Bill Frantz| Government is not reason, it is not eloquence, > it is force; like > 408-356-8506 | a fire, a troublesome servant and a fearful > master. Never for a > www.pwpconsult.com | moment should it be left to irresponsible > action. Geo Washington > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to r...@mosslight.com > >>> > >>> __ > >>> Elecraft mailing list > >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft > >>> Help: http://mailman.qth.net/mmfaq.htm > >>> Post: mailto:Elecraft@mailman.qth.net > >>> > >>> This list hosted by: http://www.qsl.net > >>> Please help support this email list: http://www.qsl.net/donate.html > >>> Message delivered to r...@mosslight.com > >> > >> __ > >> Elecraft mailing list > >> Home: http://mailman.qth.net/mailman/listinfo/elecraft > >> Help: http://mailman.qth.net/mmfaq.htm > >> Post: mailto:Elecraft@mailman.qth.net > >> > >> This list hosted by: http://www.qsl.net > >> Please help support this email list: http://www.qsl.net/donate.html > >> Message delivered to n...@widomaker.com > > > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to wun...@wunderwood.org > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to brian.waterwo...@gmail.com > __
Re: [Elecraft] K3 vs. KX3 with wsjt-x
I think the mic bias is automatically disabled in DATA A mode. But I might be wrong. wunder K6WRU Walter Underwood CM87wj http://observer.wunderwood.org/ (my blog) > On Oct 20, 2018, at 4:54 PM, Nr4c wrote: > > MIC BIAS should be OFF unless you are using a mic that requires it. Bias has > NO other use. > > Sent from my iPhone > ...nr4c. bill > > >> On Oct 20, 2018, at 6:35 PM, Robert Albano wrote: >> >> Turning the MIC BTN off fixed the problem. Now Halt Tx stops the KX3 as >> well. >> >> Should MIC BIAS be off as well? >> >> 73 Robert K7RNA >> >>> On 2018 Oct, 20, at 3:26 PM, Robert Albano wrote: >>> >>> I have the same behavior: >>> KX3 >>> PX3 >>> SignaLink >>> MacBook Pro >>> CAT interface >>> On 2018 Oct, 20, at 2:21 PM, Bill Frantz wrote: I have noticed an significant difference between the way my K3 and KX3 work with wsjt-x. On the K3, the "Halt Tx" button immediately stops transmission on the radio. With the KX3, the radio remains in transmit mode, although the computer has stopped sending audio. I have to press the "XMIT" button on the radio to get it back to receive mode. It is as if the CAT command to take the radio out of transmit mode isn't being sent or is not being processed by the radio. Not that on both radios other actions which use the CAT interface, like changing bands from the wsjt-x UI, work correctly. The K3 has been upgraded to the internal sound card/RS232 interface from the K3S. The KX3 is being used with a USB <--> RS232 cable and a home brew audio interface using a mini-dongle USB sound "card". The computer in both cases is a MacBook Pro. Has anyone else experienced this issue? 73 Bill AE6JV - Bill Frantz| Government is not reason, it is not eloquence, it is force; like 408-356-8506 | a fire, a troublesome servant and a fearful master. Never for a www.pwpconsult.com | moment should it be left to irresponsible action. Geo Washington __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to r...@mosslight.com >>> >>> __ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Elecraft@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to r...@mosslight.com >> >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to n...@widomaker.com > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to wun...@wunderwood.org __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 vs. KX3 with wsjt-x
Yes, use only method for PTT. Either CAT or VOX, but never both. I prefer CAT as, for digital operation, I don't have to mess with the VOX values for my normal SSB operation. 73 Bob, K4TAX On 10/20/2018 6:52 PM, Nr4c wrote: Sounds like you have more than one PTT control active. Check out your interface and VOX settings. Sent from my iPhone ...nr4c. bill On Oct 20, 2018, at 5:46 PM, rich hurd WC3T wrote: What is the setting of MIC BTN on the KX3? On Sat, Oct 20, 2018 at 17:21 Bill Frantz wrote: I have noticed an significant difference between the way my K3 and KX3 work with wsjt-x. On the K3, the "Halt Tx" button immediately stops transmission on the radio. With the KX3, the radio remains in transmit mode, although the computer has stopped sending audio. I have to press the "XMIT" button on the radio to get it back to receive mode. It is as if the CAT command to take the radio out of transmit mode isn't being sent or is not being processed by the radio. Not that on both radios other actions which use the CAT interface, like changing bands from the wsjt-x UI, work correctly. The K3 has been upgraded to the internal sound card/RS232 interface from the K3S. The KX3 is being used with a USB <--> RS232 cable and a home brew audio interface using a mini-dongle USB sound "card". The computer in both cases is a MacBook Pro. Has anyone else experienced this issue? 73 Bill AE6JV - Bill Frantz| Government is not reason, it is not eloquence, it is force; like 408-356-8506 | a fire, a troublesome servant and a fearful master. Never for a www.pwpconsult.com | moment should it be left to irresponsible action. Geo Washington __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to r...@wc3t.us -- 72, Rich Hurd / WC3T / DMR: 3142737 Northampton County RACES, EPA-ARRL Public Information Officer for Scouting Latitude: 40.761621 Longitude: -75.288988 (40°45.68' N 75°17.33' W) Grid: *FN20is* __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support thi __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to rmcg...@blomand.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 vs. KX3 with wsjt-x
MIC BIAS should be OFF unless you are using a mic that requires it. Bias has NO other use. Sent from my iPhone ...nr4c. bill > On Oct 20, 2018, at 6:35 PM, Robert Albano wrote: > > Turning the MIC BTN off fixed the problem. Now Halt Tx stops the KX3 as well. > > Should MIC BIAS be off as well? > > 73 Robert K7RNA > >> On 2018 Oct, 20, at 3:26 PM, Robert Albano wrote: >> >> I have the same behavior: >> KX3 >> PX3 >> SignaLink >> MacBook Pro >> CAT interface >> >>> On 2018 Oct, 20, at 2:21 PM, Bill Frantz wrote: >>> >>> I have noticed an significant difference between the way my K3 and KX3 work >>> with wsjt-x. On the K3, the "Halt Tx" button immediately stops transmission >>> on the radio. With the KX3, the radio remains in transmit mode, although >>> the computer has stopped sending audio. I have to press the "XMIT" button >>> on the radio to get it back to receive mode. It is as if the CAT command to >>> take the radio out of transmit mode isn't being sent or is not being >>> processed by the radio. >>> >>> Not that on both radios other actions which use the CAT interface, like >>> changing bands from the wsjt-x UI, work correctly. >>> >>> The K3 has been upgraded to the internal sound card/RS232 interface from >>> the K3S. >>> >>> The KX3 is being used with a USB <--> RS232 cable and a home brew audio >>> interface using a mini-dongle USB sound "card". >>> >>> The computer in both cases is a MacBook Pro. >>> >>> Has anyone else experienced this issue? >>> >>> 73 Bill AE6JV >>> >>> - >>> Bill Frantz| Government is not reason, it is not eloquence, it is >>> force; like >>> 408-356-8506 | a fire, a troublesome servant and a fearful master. >>> Never for a >>> www.pwpconsult.com | moment should it be left to irresponsible action. Geo >>> Washington >>> >>> __ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Elecraft@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> Message delivered to r...@mosslight.com >> >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to r...@mosslight.com > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 vs. KX3 with wsjt-x
Sounds like you have more than one PTT control active. Check out your interface and VOX settings. Sent from my iPhone ...nr4c. bill > On Oct 20, 2018, at 5:46 PM, rich hurd WC3T wrote: > > What is the setting of MIC BTN on the KX3? > >> On Sat, Oct 20, 2018 at 17:21 Bill Frantz wrote: >> >> I have noticed an significant difference between the way my K3 >> and KX3 work with wsjt-x. On the K3, the "Halt Tx" button >> immediately stops transmission on the radio. With the KX3, the >> radio remains in transmit mode, although the computer has >> stopped sending audio. I have to press the "XMIT" button on the >> radio to get it back to receive mode. It is as if the CAT >> command to take the radio out of transmit mode isn't being sent >> or is not being processed by the radio. >> >> Not that on both radios other actions which use the CAT >> interface, like changing bands from the wsjt-x UI, work correctly. >> >> The K3 has been upgraded to the internal sound card/RS232 >> interface from the K3S. >> >> The KX3 is being used with a USB <--> RS232 cable and a home >> brew audio interface using a mini-dongle USB sound "card". >> >> The computer in both cases is a MacBook Pro. >> >> Has anyone else experienced this issue? >> >> 73 Bill AE6JV >> >> >> - >> Bill Frantz| Government is not reason, it is not >> eloquence, it is force; like >> 408-356-8506 | a fire, a troublesome servant and a fearful >> master. Never for a >> www.pwpconsult.com | moment should it be left to irresponsible >> action. Geo Washington >> >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to r...@wc3t.us >> > -- > 72, > Rich Hurd / WC3T / DMR: 3142737 > Northampton County RACES, EPA-ARRL Public Information Officer for Scouting > Latitude: 40.761621 Longitude: -75.288988 (40°45.68' N 75°17.33' W) Grid: > *FN20is* > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support thi __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 vs. KX3 with wsjt-x
Turning the MIC BTN off fixed the problem. Now Halt Tx stops the KX3 as well. Should MIC BIAS be off as well? 73 Robert K7RNA > On 2018 Oct, 20, at 3:26 PM, Robert Albano wrote: > > I have the same behavior: > KX3 > PX3 > SignaLink > MacBook Pro > CAT interface > >> On 2018 Oct, 20, at 2:21 PM, Bill Frantz wrote: >> >> I have noticed an significant difference between the way my K3 and KX3 work >> with wsjt-x. On the K3, the "Halt Tx" button immediately stops transmission >> on the radio. With the KX3, the radio remains in transmit mode, although the >> computer has stopped sending audio. I have to press the "XMIT" button on the >> radio to get it back to receive mode. It is as if the CAT command to take >> the radio out of transmit mode isn't being sent or is not being processed by >> the radio. >> >> Not that on both radios other actions which use the CAT interface, like >> changing bands from the wsjt-x UI, work correctly. >> >> The K3 has been upgraded to the internal sound card/RS232 interface from the >> K3S. >> >> The KX3 is being used with a USB <--> RS232 cable and a home brew audio >> interface using a mini-dongle USB sound "card". >> >> The computer in both cases is a MacBook Pro. >> >> Has anyone else experienced this issue? >> >> 73 Bill AE6JV >> >> - >> Bill Frantz| Government is not reason, it is not eloquence, it is >> force; like >> 408-356-8506 | a fire, a troublesome servant and a fearful master. >> Never for a >> www.pwpconsult.com | moment should it be left to irresponsible action. Geo >> Washington >> >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to r...@mosslight.com > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to r...@mosslight.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 vs. KX3 with wsjt-x
I have the same behavior: KX3 PX3 SignaLink MacBook Pro CAT interface > On 2018 Oct, 20, at 2:21 PM, Bill Frantz wrote: > > I have noticed an significant difference between the way my K3 and KX3 work > with wsjt-x. On the K3, the "Halt Tx" button immediately stops transmission > on the radio. With the KX3, the radio remains in transmit mode, although the > computer has stopped sending audio. I have to press the "XMIT" button on the > radio to get it back to receive mode. It is as if the CAT command to take the > radio out of transmit mode isn't being sent or is not being processed by the > radio. > > Not that on both radios other actions which use the CAT interface, like > changing bands from the wsjt-x UI, work correctly. > > The K3 has been upgraded to the internal sound card/RS232 interface from the > K3S. > > The KX3 is being used with a USB <--> RS232 cable and a home brew audio > interface using a mini-dongle USB sound "card". > > The computer in both cases is a MacBook Pro. > > Has anyone else experienced this issue? > > 73 Bill AE6JV > > - > Bill Frantz| Government is not reason, it is not eloquence, it is > force; like > 408-356-8506 | a fire, a troublesome servant and a fearful master. > Never for a > www.pwpconsult.com | moment should it be left to irresponsible action. Geo > Washington > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to r...@mosslight.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 vs. KX3 with wsjt-x
What is the setting of MIC BTN on the KX3? On Sat, Oct 20, 2018 at 17:21 Bill Frantz wrote: > I have noticed an significant difference between the way my K3 > and KX3 work with wsjt-x. On the K3, the "Halt Tx" button > immediately stops transmission on the radio. With the KX3, the > radio remains in transmit mode, although the computer has > stopped sending audio. I have to press the "XMIT" button on the > radio to get it back to receive mode. It is as if the CAT > command to take the radio out of transmit mode isn't being sent > or is not being processed by the radio. > > Not that on both radios other actions which use the CAT > interface, like changing bands from the wsjt-x UI, work correctly. > > The K3 has been upgraded to the internal sound card/RS232 > interface from the K3S. > > The KX3 is being used with a USB <--> RS232 cable and a home > brew audio interface using a mini-dongle USB sound "card". > > The computer in both cases is a MacBook Pro. > > Has anyone else experienced this issue? > > 73 Bill AE6JV > > > - > Bill Frantz| Government is not reason, it is not > eloquence, it is force; like > 408-356-8506 | a fire, a troublesome servant and a fearful > master. Never for a > www.pwpconsult.com | moment should it be left to irresponsible > action. Geo Washington > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to r...@wc3t.us > -- 72, Rich Hurd / WC3T / DMR: 3142737 Northampton County RACES, EPA-ARRL Public Information Officer for Scouting Latitude: 40.761621 Longitude: -75.288988 (40°45.68' N 75°17.33' W) Grid: *FN20is* __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 vs. KX3 with wsjt-x
I have noticed an significant difference between the way my K3 and KX3 work with wsjt-x. On the K3, the "Halt Tx" button immediately stops transmission on the radio. With the KX3, the radio remains in transmit mode, although the computer has stopped sending audio. I have to press the "XMIT" button on the radio to get it back to receive mode. It is as if the CAT command to take the radio out of transmit mode isn't being sent or is not being processed by the radio. Not that on both radios other actions which use the CAT interface, like changing bands from the wsjt-x UI, work correctly. The K3 has been upgraded to the internal sound card/RS232 interface from the K3S. The KX3 is being used with a USB <--> RS232 cable and a home brew audio interface using a mini-dongle USB sound "card". The computer in both cases is a MacBook Pro. Has anyone else experienced this issue? 73 Bill AE6JV - Bill Frantz| Government is not reason, it is not eloquence, it is force; like 408-356-8506 | a fire, a troublesome servant and a fearful master. Never for a www.pwpconsult.com | moment should it be left to irresponsible action. Geo Washington __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com