Re: [Elecraft] K4: savable profiles?

2019-11-28 Thread Joseph Street 
Steve,


You and I have a few things in common.  One half of my family came in 1650's 
and my other ancestors Mi'Kmak people probably kept them from dying of scurvy 
over the winter.  By the way, the Queen of England owes our folks about 4 
billion dollars and the UN has asked her to pay up but so far just silence from 
windsor castle. Probably too busy trying to figure out what to do with Andrew 
right now.


Thanks for the greeting.  I'll listen for you on the air.

Joe


From: stephen shearer 
Sent: November 28, 2019 10:05:49 AM
To: Joseph Street; Elecraft Reflector
Subject: Re: [Elecraft] K4: savable profiles?


Joe, welcome to "Elecraft" and Mint...

I have been using Mint since March ??   I used another form of Linus with 
another laptop.  Liked it but don't remember why I went back to W7 (then).
Not new to computers, just tired of W10 messing my system settings.  I think I 
update Mint a few times a week but since it doesn't mess things, all goes well.

I am currently using my KX3 with a "headless" Raspberry Pi running wsjt-x for 
FT8.  I was in the kitchen this morning, stuffing the turkey and operating FT8 
80m on my laptop with a VNC link to the "shack"...  Yes, any excuse to eat.  My 
parents, parents, parents... did come to the "new" world on the Mayflower back 
in 1620, so it IS required and my father said that his side of the family was 
here to meet and help the new settlers...

I have enjoyed the Elecraft rigs.  I built a 10w K2, I have the 
KX3/PX3/amp(what ever the number is), and looking forward to having a "full 
time" shack radio.  The KX3 combo will become my full time portable rig, no 
shack time...


The reflector is a great place to ask questions...


73, steve WB3LGC


On 11/28/19 9:00 AM, Joseph Street wrote:

Hi Steve


I saw your comment about Linux mint.  Just this week I installed it which is my 
first experience with Linux but like you I am just fed up with windows calling 
the shots on me all the time.  I may need to pick your brain one day, I think 
this used KX3/PX3 and amp combo I just got is all up to date firmware wise (the 
previous owner says) but I'm sure one day I'm going to want to connect things 
to my PC.


Best regards and happy holidays

Joe ve3vxo


From: elecraft-boun...@mailman.qth.net<mailto:elecraft-boun...@mailman.qth.net> 
<mailto:elecraft-boun...@mailman.qth.net> on 
behalf of stephen shearer 
<mailto:sm.shearer...@gmail.com>
Sent: November 27, 2019 7:59:34 PM
To: Wayne Burdick
Cc: Elecraft Reflector
Subject: Re: [Elecraft] K4: savable profiles?

Wayne, HAVE a great Thanksgiving...

I wasn't "knocking" the K4 (I have one on order)...

I would like to see my KX3/PX3 etc. utilities for my laptop (Linux Mint)
easier to load.
But, I do need to sit down and figure out how to load them as it is more
than a double-click.
I may not have been clear.
I am tired of W10...

I do like the idea of initialization files for different usage (contest,
DX, casual), if different.
One click to re-set all the settings, although I always just set the KX3
and operated...
Although, it would be nice to be able to save all the settings (mike,
AF, Power, etc) for my FT8 stuff and a different set of settings for SSB...
"Although" pen-paper works, too.

73, steve WB3LGC

On 11/27/19 7:06 PM, Wayne Burdick wrote:
> No K4 user will ever have to use -- or even see -- a Linux command. The 
> embedded computer is there to make things simpler, and the operating system 
> will not be something you need to be conscious of. That includes software 
> updates.
>
> Any internal "apps" (advanced software functions) will be 100% vetted by 
> Elecraft and a team of intrepid pre-testers before it appears in a software 
> update package. You'll know you have a new function available when it appears 
> on a switch selection or in the menu; you won't have to explicitly install it.
>
> Think of the K4 as a Hybrid SDR for Non-Nerds (tm). You can stay focused on 
> exploring the bands, working DX, and experimenting with new modes.
>
> 73,
> Wayne
> N6KR
>
>
>
>> On Nov 27, 2019, at 12:38 PM, stephen shearer 
>> <mailto:sm.shearer...@gmail.com> wrote:
>>
>> Yes, that would be nice...
>>
>> What I want to see (for ALL) utilities is the ability to load into Linux 
>> without having to compile the utility (I understand .deb files)
>> Many Linux users are NOT geeks.  I just wanted to get away from W10...
>> OR have good directions on how to load into the most popular distributions 
>> like Mint.
>> xsjt-x loads very easily; .deb files load even on a Raspberry Pi - Elecraft 
>> could too.
>>
>> I like the KX3/PX3/amp utility but the K3s/K4 "machi

Re: [Elecraft] K4: savable profiles?

2019-11-28 Thread stephen shearer 

Joe, welcome to "Elecraft" and Mint...

I have been using Mint since March ??   I used another form of Linus 
with another laptop.  Liked it but don't remember why I went back to W7 
(then).
Not new to computers, just tired of W10 messing my system settings.  I 
think I update Mint a few times a week but since it doesn't mess things, 
all goes well.


I am currently using my KX3 with a "headless" Raspberry Pi running 
wsjt-x for FT8.  I was in the kitchen this morning, stuffing the turkey 
and operating FT8 80m on my laptop with a VNC link to the "shack"...  
Yes, any excuse to eat.  My parents, parents, parents... did come to the 
"new" world on the Mayflower back in 1620, so it IS required and my 
father said that his side of the family was here to meet and help the 
new settlers...


I have enjoyed the Elecraft rigs.  I built a 10w K2, I have the 
KX3/PX3/amp(what ever the number is), and looking forward to having a 
"full time" shack radio.  The KX3 combo will become my full time 
portable rig, no shack time...



The reflector is a great place to ask questions...


73, steve WB3LGC


On 11/28/19 9:00 AM, Joseph Street wrote:


Hi Steve


I saw your comment about Linux mint.  Just this week I installed it 
which is my first experience with Linux but like you I am just fed up 
with windows calling the shots on me all the time.  I may need to pick 
your brain one day, I think this used KX3/PX3 and amp combo I just got 
is all up to date firmware wise (the previous owner says) but I'm sure 
one day I'm going to want to connect things to my PC.



Best regards and happy holidays

Joe ve3vxo


*From:* elecraft-boun...@mailman.qth.net 
 on behalf of stephen shearer 


*Sent:* November 27, 2019 7:59:34 PM
*To:* Wayne Burdick
*Cc:* Elecraft Reflector
*Subject:* Re: [Elecraft] K4: savable profiles?
Wayne, HAVE a great Thanksgiving...

I wasn't "knocking" the K4 (I have one on order)...

I would like to see my KX3/PX3 etc. utilities for my laptop (Linux Mint)
easier to load.
But, I do need to sit down and figure out how to load them as it is more
than a double-click.
I may not have been clear.
I am tired of W10...

I do like the idea of initialization files for different usage (contest,
DX, casual), if different.
One click to re-set all the settings, although I always just set the KX3
and operated...
Although, it would be nice to be able to save all the settings (mike,
AF, Power, etc) for my FT8 stuff and a different set of settings for 
SSB...

"Although" pen-paper works, too.

73, steve WB3LGC

On 11/27/19 7:06 PM, Wayne Burdick wrote:
> No K4 user will ever have to use -- or even see -- a Linux command. 
The embedded computer is there to make things simpler, and the 
operating system will not be something you need to be conscious of. 
That includes software updates.

>
> Any internal "apps" (advanced software functions) will be 100% 
vetted by Elecraft and a team of intrepid pre-testers before it 
appears in a software update package. You'll know you have a new 
function available when it appears on a switch selection or in the 
menu; you won't have to explicitly install it.

>
> Think of the K4 as a Hybrid SDR for Non-Nerds (tm). You can stay 
focused on exploring the bands, working DX, and experimenting with new 
modes.

>
> 73,
> Wayne
> N6KR
>
>
>
>> On Nov 27, 2019, at 12:38 PM, stephen shearer 
 wrote:

>>
>> Yes, that would be nice...
>>
>> What I want to see (for ALL) utilities is the ability to load into 
Linux without having to compile the utility (I understand .deb files)

>> Many Linux users are NOT geeks.  I just wanted to get away from W10...
>> OR have good directions on how to load into the most popular 
distributions like Mint.
>> xsjt-x loads very easily; .deb files load even on a Raspberry Pi - 
Elecraft could too.

>>
>> I like the KX3/PX3/amp utility but the K3s/K4 "machine" is more 
sophisticated and NEEDS a more advanced utility, being able to save 
"setup" init files.

>> It would be a nice addition for the KX line too.
>>
>> 73, steve WB3LGC
>>
>> On 11/27/19 2:47 PM, Nr4c wrote:
>>> This would be a nice feature, but, I would rather have the ability 
to save mic settings like which port, gain, compression, bias and free 
response settings. At least three or four (or more) mic profiles would 
be mice.

>>>
>>> Sent from my iPhone
>>> ...nr4c. bill
>>>
>>>
>>>> On Nov 27, 2019, at 12:57 PM, Doug Turnbull  wrote:
>>>>
>>>> Dear OMs and YLs,
>>>> Even if this could be done in the K4 Utility it would be 
useful.   This
>>>> facility might even

Re: [Elecraft] K4: savable profiles?

2019-11-28 Thread Richard Zalewski 
Absolutely great idea/feature

Richard
*W7ZR* ex:5C5Z, CN2ZR, K2JSP, W6SBZ, W7KXR, K9ZIJ, W9KNF, W0KDF, W0MQU,
J68ZR, KC6ZR, PJ4/W7ZR, KH2,W7ZR, KH6/W7ZR, V31ZR, VK4AAZ, XE2DV


*Be joyful in hope, patient in affliction, faithful in prayer*


On Thu, Nov 28, 2019 at 6:56 AM Nr4c  wrote:

> This feature should be added to the present Utility programs for existing
> radios.
>
> Sent from my iPhone
> ...nr4c. bill
>
>
> > On Nov 27, 2019, at 11:38 PM, K9MA  wrote:
> >
> > On 11/27/2019 19:09, Walter Underwood wrote:
> >> Split the options from the calibration parameters.
> >
> > I'll second that. For example, it would be great to be able to take all
> those option setting on my radio, put them on a USB stick, and load them on
> another radio at a multi-op station. Obviously, one would not want to
> change the calibration of that radio.
> >
> > 73,
> >
> > Scott K9MA
> >
> > --
> > Scott  K9MA
> >
> > k...@sdellington.us
> >
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to n...@widomaker.com
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dick.w...@gmail.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K4: savable profiles?

2019-11-28 Thread Nr4c 
This feature should be added to the present Utility programs for existing 
radios. 

Sent from my iPhone
...nr4c. bill


> On Nov 27, 2019, at 11:38 PM, K9MA  wrote:
> 
> On 11/27/2019 19:09, Walter Underwood wrote:
>> Split the options from the calibration parameters.
> 
> I'll second that. For example, it would be great to be able to take all those 
> option setting on my radio, put them on a USB stick, and load them on another 
> radio at a multi-op station. Obviously, one would not want to change the 
> calibration of that radio.
> 
> 73,
> 
> Scott K9MA
> 
> -- 
> Scott  K9MA
> 
> k...@sdellington.us
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@widomaker.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K4: savable profiles?

2019-11-27 Thread K9MA 

On 11/27/2019 19:09, Walter Underwood wrote:

Split the options from the calibration parameters.


I'll second that. For example, it would be great to be able to take all 
those option setting on my radio, put them on a USB stick, and load them 
on another radio at a multi-op station. Obviously, one would not want to 
change the calibration of that radio.


73,

Scott K9MA

--
Scott  K9MA

k...@sdellington.us

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K4: savable profiles?

2019-11-27 Thread Wayne Burdick 


> On Nov 27, 2019, at 5:23 PM, Kidder, George  wrote:
> 
> The commands in the Programmer's Reference can all be executed from a 
> macro in FLdigi, and I suspect from many other add-on programs as well.  
> This takes care of most of my needs for the K3, and I would expect the 
> K4 would be similar.

Yes. 

The K4 will have many more commands, all "direct." There will be no need for 
"indirect" commands, i.e. those that do switch/knob/display emulation, though 
we may keep a very small number of these for backwards compatibility with some 
computer applications.

The K4 also has more user-programmable controls in general, including PF1-4 
(vs. PF1-2) for direct menu assignment, and up to 14 Fn controls with more 
general application including switch-sequence recording.

Wayne
N6KR



> 
> 73 - George, W3HBM
> 
> 
> On 11/27/2019 8:09 PM, Walter Underwood wrote:
>> [This message came from an external source. If suspicious, report to 
>> ab...@ilstu.edu]
>> 
>> Savable and shareable would be excellent. Split the options from the 
>> calibration parameters.
>> 
>> wunder
>> K6WRU
>> Walter Underwood
>> CM87wj
>> http://observer.wunderwood.org/ (my blog)
>> 
>>> On Nov 27, 2019, at 5:06 PM, Wayne Burdick  wrote:
>>> 
>>> 
 stephen shearer  wrote:
 
 Wayne, HAVE a great Thanksgiving...
>>> Thanks! Ditto to you & all.
>>> 
>>> 
 I may not have been clear.
 I am tired of W10...
>>> Me too, and I don't even use it :)
>>> 
>>> 
 I do like the idea of initialization files for different usage (contest, 
 DX, casual), if different.
 One click to re-set all the settings, although I always just set the KX3 
 and operated...
 Although, it would be nice to be able to save all the settings (mike, AF, 
 Power, etc) for my FT8 stuff and a different set of settings for SSB...
>>> Definitely. That is already in the works.
>>> 
>>> 73,
>>> Wayne
>>> N6KR
>>> 
>>> 
 73, steve WB3LGC
>>> 
>>> 
>>> __
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft@mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to wun...@wunderwood.org
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to gkid...@ilstu.edu
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@elecraft.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K4: savable profiles?

2019-11-27 Thread Kidder, George 
The commands in the Programmer's Reference can all be executed from a 
macro in FLdigi, and I suspect from many other add-on programs as well.  
This takes care of most of my needs for the K3, and I would expect the 
K4 would be similar.

73 - George, W3HBM


On 11/27/2019 8:09 PM, Walter Underwood wrote:
> [This message came from an external source. If suspicious, report to 
> ab...@ilstu.edu]
>
> Savable and shareable would be excellent. Split the options from the 
> calibration parameters.
>
> wunder
> K6WRU
> Walter Underwood
> CM87wj
> http://observer.wunderwood.org/ (my blog)
>
>> On Nov 27, 2019, at 5:06 PM, Wayne Burdick  wrote:
>>
>>
>>> stephen shearer  wrote:
>>>
>>> Wayne, HAVE a great Thanksgiving...
>> Thanks! Ditto to you & all.
>>
>>
>>> I may not have been clear.
>>> I am tired of W10...
>> Me too, and I don't even use it :)
>>
>>
>>> I do like the idea of initialization files for different usage (contest, 
>>> DX, casual), if different.
>>> One click to re-set all the settings, although I always just set the KX3 
>>> and operated...
>>> Although, it would be nice to be able to save all the settings (mike, AF, 
>>> Power, etc) for my FT8 stuff and a different set of settings for SSB...
>> Definitely. That is already in the works.
>>
>> 73,
>> Wayne
>> N6KR
>>
>>
>>> 73, steve WB3LGC
>>
>>
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to wun...@wunderwood.org
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to gkid...@ilstu.edu
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K4: savable profiles?

2019-11-27 Thread stephen shearer 

Wayne, HAVE a great Thanksgiving...

I wasn't "knocking" the K4 (I have one on order)...

I would like to see my KX3/PX3 etc. utilities for my laptop (Linux Mint) 
easier to load.
But, I do need to sit down and figure out how to load them as it is more 
than a double-click.

I may not have been clear.
I am tired of W10...

I do like the idea of initialization files for different usage (contest, 
DX, casual), if different.
One click to re-set all the settings, although I always just set the KX3 
and operated...
Although, it would be nice to be able to save all the settings (mike, 
AF, Power, etc) for my FT8 stuff and a different set of settings for SSB...

"Although" pen-paper works, too.

73, steve WB3LGC

On 11/27/19 7:06 PM, Wayne Burdick wrote:

No K4 user will ever have to use -- or even see -- a Linux command. The 
embedded computer is there to make things simpler, and the operating system 
will not be something you need to be conscious of. That includes software 
updates.

Any internal "apps" (advanced software functions) will be 100% vetted by 
Elecraft and a team of intrepid pre-testers before it appears in a software update 
package. You'll know you have a new function available when it appears on a switch 
selection or in the menu; you won't have to explicitly install it.

Think of the K4 as a Hybrid SDR for Non-Nerds (tm). You can stay focused on 
exploring the bands, working DX, and experimenting with new modes.

73,
Wayne
N6KR




On Nov 27, 2019, at 12:38 PM, stephen shearer  wrote:

Yes, that would be nice...

What I want to see (for ALL) utilities is the ability to load into Linux 
without having to compile the utility (I understand .deb files)
Many Linux users are NOT geeks.  I just wanted to get away from W10...
OR have good directions on how to load into the most popular distributions like 
Mint.
xsjt-x loads very easily; .deb files load even on a Raspberry Pi - Elecraft 
could too.

I like the KX3/PX3/amp utility but the K3s/K4 "machine" is more sophisticated and NEEDS a 
more advanced utility, being able to save "setup" init files.
It would be a nice addition for the KX line too.

73, steve WB3LGC

On 11/27/19 2:47 PM, Nr4c wrote:

This would be a nice feature, but, I would rather have the ability to save mic 
settings like which port, gain, compression, bias and free response settings. 
At least three or four (or more) mic profiles would be mice.

Sent from my iPhone
...nr4c. bill



On Nov 27, 2019, at 12:57 PM, Doug Turnbull  wrote:

Dear OMs and YLs,
Even if this could be done in the K4 Utility it would be useful.   This
facility might even be better in the Utility if this helped to keep the
radio user friendly.   Boy, this list goes on and on but it is good just the
same.   We are all writing our letters to Santa.

   73 Doug EI2CN

-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of John Harper
Sent: 27 November 2019 17:27
To: Elecraft list
Subject: [Elecraft] K4: savable profiles?

Will the K4 have the ability to save (and then select from) various
"profiles" so that a user can go from, say, 20m 100-watt CW to 80m 10-watt
FT8 with all the saved settings (power, mode, bandwidth, audio in/out
levels) taking effect simply by selecting the chosen profile?



Tnx/73,


John AE5X
https://ae5x.blogspot.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to turnb...@net1.ie

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@widomaker.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to sm.shearer...@gmail.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@elecraft.com



__
Elecra

Re: [Elecraft] K4: savable profiles?

2019-11-27 Thread Walter Underwood 
Savable and shareable would be excellent. Split the options from the 
calibration parameters.

wunder
K6WRU
Walter Underwood
CM87wj
http://observer.wunderwood.org/ (my blog)

> On Nov 27, 2019, at 5:06 PM, Wayne Burdick  wrote:
> 
> 
>> stephen shearer  wrote:
>> 
>> Wayne, HAVE a great Thanksgiving...
> 
> Thanks! Ditto to you & all.
> 
> 
>> I may not have been clear.
>> I am tired of W10...
> 
> Me too, and I don't even use it :)
> 
> 
>> I do like the idea of initialization files for different usage (contest, DX, 
>> casual), if different.
>> One click to re-set all the settings, although I always just set the KX3 and 
>> operated...
>> Although, it would be nice to be able to save all the settings (mike, AF, 
>> Power, etc) for my FT8 stuff and a different set of settings for SSB...
> 
> Definitely. That is already in the works.
> 
> 73,
> Wayne
> N6KR
> 
> 
>> 
>> 73, steve WB3LGC
> 
> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wun...@wunderwood.org 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K4: savable profiles?

2019-11-27 Thread Wayne Burdick 


> stephen shearer  wrote:
> 
> Wayne, HAVE a great Thanksgiving...

Thanks! Ditto to you & all.


> I may not have been clear.
> I am tired of W10...

Me too, and I don't even use it :)


> I do like the idea of initialization files for different usage (contest, DX, 
> casual), if different.
> One click to re-set all the settings, although I always just set the KX3 and 
> operated...
> Although, it would be nice to be able to save all the settings (mike, AF, 
> Power, etc) for my FT8 stuff and a different set of settings for SSB...

Definitely. That is already in the works.

73,
Wayne
N6KR


> 
> 73, steve WB3LGC



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K4: savable profiles?

2019-11-27 Thread Wayne Burdick 
One nice thing about the K4 is its essentially unlimited room for software 
program/data expansion. It will be able to save full operating profiles, mic 
settings, and whatever else users agree would be helpful in the future. This is 
one reason for the front-panel USB jack. 

Wayne
N6KR



> On Nov 27, 2019, at 11:47 AM, Nr4c  wrote:
> 
> This would be a nice feature, but, I would rather have the ability to save 
> mic settings like which port, gain, compression, bias and free response 
> settings. At least three or four (or more) mic profiles would be mice. 
> 
> Sent from my iPhone
> ...nr4c. bill
> 
> 
>> On Nov 27, 2019, at 12:57 PM, Doug Turnbull  wrote:
>> 
>> Dear OMs and YLs,
>>   Even if this could be done in the K4 Utility it would be useful.   This
>> facility might even be better in the Utility if this helped to keep the
>> radio user friendly.   Boy, this list goes on and on but it is good just the
>> same.   We are all writing our letters to Santa.
>> 
>>  73 Doug EI2CN
>> 
>> -Original Message-
>> From: elecraft-boun...@mailman.qth.net
>> [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of John Harper
>> Sent: 27 November 2019 17:27
>> To: Elecraft list
>> Subject: [Elecraft] K4: savable profiles?
>> 
>> Will the K4 have the ability to save (and then select from) various
>> "profiles" so that a user can go from, say, 20m 100-watt CW to 80m 10-watt
>> FT8 with all the saved settings (power, mode, bandwidth, audio in/out
>> levels) taking effect simply by selecting the chosen profile?
>> 
>> 
>> 
>> Tnx/73,
>> 
>> 
>> John AE5X

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K4: savable profiles?

2019-11-27 Thread Wayne Burdick 
No K4 user will ever have to use -- or even see -- a Linux command. The 
embedded computer is there to make things simpler, and the operating system 
will not be something you need to be conscious of. That includes software 
updates. 

Any internal "apps" (advanced software functions) will be 100% vetted by 
Elecraft and a team of intrepid pre-testers before it appears in a software 
update package. You'll know you have a new function available when it appears 
on a switch selection or in the menu; you won't have to explicitly install it.

Think of the K4 as a Hybrid SDR for Non-Nerds (tm). You can stay focused on 
exploring the bands, working DX, and experimenting with new modes.

73,
Wayne
N6KR



> On Nov 27, 2019, at 12:38 PM, stephen shearer  wrote:
> 
> Yes, that would be nice...
> 
> What I want to see (for ALL) utilities is the ability to load into Linux 
> without having to compile the utility (I understand .deb files)
> Many Linux users are NOT geeks.  I just wanted to get away from W10...
> OR have good directions on how to load into the most popular distributions 
> like Mint.
> xsjt-x loads very easily; .deb files load even on a Raspberry Pi - Elecraft 
> could too.
> 
> I like the KX3/PX3/amp utility but the K3s/K4 "machine" is more sophisticated 
> and NEEDS a more advanced utility, being able to save "setup" init files.
> It would be a nice addition for the KX line too.
> 
> 73, steve WB3LGC
> 
> On 11/27/19 2:47 PM, Nr4c wrote:
>> This would be a nice feature, but, I would rather have the ability to save 
>> mic settings like which port, gain, compression, bias and free response 
>> settings. At least three or four (or more) mic profiles would be mice.
>> 
>> Sent from my iPhone
>> ...nr4c. bill
>> 
>> 
>>> On Nov 27, 2019, at 12:57 PM, Doug Turnbull  wrote:
>>> 
>>> Dear OMs and YLs,
>>>Even if this could be done in the K4 Utility it would be useful.   This
>>> facility might even be better in the Utility if this helped to keep the
>>> radio user friendly.   Boy, this list goes on and on but it is good just the
>>> same.   We are all writing our letters to Santa.
>>> 
>>>   73 Doug EI2CN
>>> 
>>> -Original Message-
>>> From: elecraft-boun...@mailman.qth.net
>>> [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of John Harper
>>> Sent: 27 November 2019 17:27
>>> To: Elecraft list
>>> Subject: [Elecraft] K4: savable profiles?
>>> 
>>> Will the K4 have the ability to save (and then select from) various
>>> "profiles" so that a user can go from, say, 20m 100-watt CW to 80m 10-watt
>>> FT8 with all the saved settings (power, mode, bandwidth, audio in/out
>>> levels) taking effect simply by selecting the chosen profile?
>>> 
>>> 
>>> 
>>> Tnx/73,
>>> 
>>> 
>>> John AE5X
>>> https://ae5x.blogspot.com
>>> __
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft@mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to turnb...@net1.ie
>>> 
>>> __
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft@mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to n...@widomaker.com
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to sm.shearer...@gmail.com
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@elecraft.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K4: savable profiles?

2019-11-27 Thread stephen shearer 

Yes, that would be nice...

What I want to see (for ALL) utilities is the ability to load into Linux 
without having to compile the utility (I understand .deb files)

Many Linux users are NOT geeks.  I just wanted to get away from W10...
OR have good directions on how to load into the most popular 
distributions like Mint.
xsjt-x loads very easily; .deb files load even on a Raspberry Pi - 
Elecraft could too.


I like the KX3/PX3/amp utility but the K3s/K4 "machine" is more 
sophisticated and NEEDS a more advanced utility, being able to save 
"setup" init files.

It would be a nice addition for the KX line too.

73, steve WB3LGC

On 11/27/19 2:47 PM, Nr4c wrote:

This would be a nice feature, but, I would rather have the ability to save mic 
settings like which port, gain, compression, bias and free response settings. 
At least three or four (or more) mic profiles would be mice.

Sent from my iPhone
...nr4c. bill



On Nov 27, 2019, at 12:57 PM, Doug Turnbull  wrote:

Dear OMs and YLs,
Even if this could be done in the K4 Utility it would be useful.   This
facility might even be better in the Utility if this helped to keep the
radio user friendly.   Boy, this list goes on and on but it is good just the
same.   We are all writing our letters to Santa.

   73 Doug EI2CN

-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of John Harper
Sent: 27 November 2019 17:27
To: Elecraft list
Subject: [Elecraft] K4: savable profiles?

Will the K4 have the ability to save (and then select from) various
"profiles" so that a user can go from, say, 20m 100-watt CW to 80m 10-watt
FT8 with all the saved settings (power, mode, bandwidth, audio in/out
levels) taking effect simply by selecting the chosen profile?



Tnx/73,


John AE5X
https://ae5x.blogspot.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to turnb...@net1.ie

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@widomaker.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to sm.shearer...@gmail.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K4: savable profiles?

2019-11-27 Thread Nr4c 
This would be a nice feature, but, I would rather have the ability to save mic 
settings like which port, gain, compression, bias and free response settings. 
At least three or four (or more) mic profiles would be mice. 

Sent from my iPhone
...nr4c. bill


> On Nov 27, 2019, at 12:57 PM, Doug Turnbull  wrote:
> 
> Dear OMs and YLs,
>Even if this could be done in the K4 Utility it would be useful.   This
> facility might even be better in the Utility if this helped to keep the
> radio user friendly.   Boy, this list goes on and on but it is good just the
> same.   We are all writing our letters to Santa.
> 
>   73 Doug EI2CN
> 
> -Original Message-
> From: elecraft-boun...@mailman.qth.net
> [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of John Harper
> Sent: 27 November 2019 17:27
> To: Elecraft list
> Subject: [Elecraft] K4: savable profiles?
> 
> Will the K4 have the ability to save (and then select from) various
> "profiles" so that a user can go from, say, 20m 100-watt CW to 80m 10-watt
> FT8 with all the saved settings (power, mode, bandwidth, audio in/out
> levels) taking effect simply by selecting the chosen profile?
> 
> 
> 
> Tnx/73,
> 
> 
> John AE5X
> https://ae5x.blogspot.com
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to turnb...@net1.ie 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@widomaker.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K4: savable profiles?

2019-11-27 Thread Doug Turnbull 
Dear OMs and YLs,
Even if this could be done in the K4 Utility it would be useful.   This
facility might even be better in the Utility if this helped to keep the
radio user friendly.   Boy, this list goes on and on but it is good just the
same.   We are all writing our letters to Santa.

   73 Doug EI2CN

-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of John Harper
Sent: 27 November 2019 17:27
To: Elecraft list
Subject: [Elecraft] K4: savable profiles?

Will the K4 have the ability to save (and then select from) various
"profiles" so that a user can go from, say, 20m 100-watt CW to 80m 10-watt
FT8 with all the saved settings (power, mode, bandwidth, audio in/out
levels) taking effect simply by selecting the chosen profile?



Tnx/73,


John AE5X
https://ae5x.blogspot.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to turnb...@net1.ie 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K4: savable profiles?

2019-11-27 Thread John Harper 
Will the K4 have the ability to save (and then select from) various
“profiles” so that a user can go from, say, 20m 100-watt CW to 80m 10-watt
FT8 with all the saved settings (power, mode, bandwidth, audio in/out
levels) taking effect simply by selecting the chosen profile?



Tnx/73,


John AE5X
https://ae5x.blogspot.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com