Re: [Elecraft] K4 IF signal 'OUT' for external application useage
OK, so the only thing I do with ethernet is connect to the Internet via a router. So would the K4 ethernet connect via the router using a local network to communicate with my computer? I have that option to network my printer between multiple computers. One related question will the ethernet permit separate IQ from main and sub Rx (diversity mode with separate antennas)? I do that with my K3 by using both 1st IF's to two LP-Pan which create IQ baseband to a four-port soundcard. I have both LP-Pan phase-locked to a single LO to preserve diversity reception. The computer runs MAP65 which takes two receiver IQ inputs. <http://www.kl7uw.com/MAP65.htm>http://www.kl7uw.com/MAP65.htm Just curious at this point. 73, Ed - KL7UW Date: Thu, 24 Sep 2020 12:30:21 -0700 From: Wayne Burdick To: David Gilbert Cc: elecraft@mailman.qth.net Subject: Re: [Elecraft] K4 IF signal 'OUT' for external application useage Message-ID: <74039e94-753f-4985-ab0c-fa972bdd7...@elecraft.com> Content-Type: text/plain; charset=utf-8 IQ streaming data from the K4 will be available over Ethernet. Wayne N6KR 73, Ed - KL7UW http://www.kl7uw.com Dubus-NA Business mail: dubus...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K4 IF signal 'OUT' for external application useage
VERY cool ... Thanks es 73, Dave AB7E On 9/24/2020 12:30 PM, Wayne Burdick wrote: IQ streaming data from the K4 will be available over Ethernet. Wayne N6KR elecraft.com On Sep 24, 2020, at 12:14 PM, David Gilbert wrote: Except that an I/Q output would also enable the convenient use of other 3rd party software. If Elecraft didn't bother to include it in the K4, I think that's a mistake. Dave AB7E On 9/24/2020 11:58 AM, Buck wrote: As I recall, there is an HDMI output on the back of the K4. You can choose to have it display the front panel, the panadapter or both on an external monitor. You won't need to use I/Q to an LP-PAN. Buck, k4ia Honor Roll 8BDXCC EasyWayHamBooks.com On 9/24/2020 2:51 PM, Brian wrote: Looking at the recent (though long from complete) K4 guide, I don't see an IF OUT per se as I have in the accessory board in my K3 (or in fact the output I/Q from the KX3 I can run directly into my sound card on the computer). Does the XVTR IF OUT suffice for this? The reason I ask is that eventually my LP-PAN is going to die - hopefully not soon but I have been using it for quite some time now. I use the IF out from the K3 into the LP-PAN and then into NaP3. Now I do realize there is a panadapter on the K4 - obviously - but I DO enjoy (in fact pretty much need) the large computer display for the pana/spectrum display and DO use the NaP3 software controls for K3 functions on my keyboard and mouse for tuning and such. The display on the K4 is not the same thing I don't think. Even with some keyboard/mouse controls native to the K4 (?) the display size is a deterent to me as it exists. Apologies to the company. I assume maybe there MIGHT be a video card OUT re. the K4 panadapter at some time, but that is a maybe.. and more money. I won't be nearly the first to get a K4.. down the line probably as I have a K3S here and a K3 at the in-law's property. If I did get that 'last final rig' and it was a K4 (Iikely as I don't have much in the shack since 2000 that was not Elecraft) I would, as an older fellow then.. want the larger visual display of the computer/IF out/NaP3 sort of solution. So, do I get some IF out I can use? tnx Brian VE3VAW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to n...@elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K4 IF signal 'OUT' for external application useage
IQ streaming data from the K4 will be available over Ethernet. Wayne N6KR elecraft.com > On Sep 24, 2020, at 12:14 PM, David Gilbert wrote: > > > Except that an I/Q output would also enable the convenient use of other 3rd > party software. If Elecraft didn't bother to include it in the K4, I think > that's a mistake. > > Dave AB7E > > > >> On 9/24/2020 11:58 AM, Buck wrote: >> As I recall, there is an HDMI output on the back of the K4. You can choose >> to have it display the front panel, the panadapter or both on an external >> monitor. >> >> You won't need to use I/Q to an LP-PAN. >> >> Buck, k4ia >> Honor Roll >> 8BDXCC >> EasyWayHamBooks.com > >> >>> On 9/24/2020 2:51 PM, Brian wrote: >>> >>> Looking at the recent (though long from complete) K4 guide, I don't see an >>> IF OUT per se as I have in the accessory board in my K3 (or in fact the >>> output I/Q from the KX3 I can run directly into my sound card on the >>> computer). Does the XVTR IF OUT suffice for this? >>> >>> The reason I ask is that eventually my LP-PAN is going to die - hopefully >>> not soon but I have been using it for quite some time now. I use the IF >>> out from the K3 into the LP-PAN and then into NaP3. >>> >>> Now I do realize there is a panadapter on the K4 - obviously - but I DO >>> enjoy (in fact pretty much need) the large computer display for the >>> pana/spectrum display and DO use the NaP3 software controls for K3 >>> functions on my keyboard and mouse for tuning and such. >>> The display on the K4 is not the same thing I don't think. Even with some >>> keyboard/mouse controls native to the K4 (?) the display size is a deterent >>> to me as it exists. Apologies to the company. I assume maybe there MIGHT >>> be a video card OUT re. the K4 panadapter at some time, but that is a >>> maybe.. and more money. >>> >>> I won't be nearly the first to get a K4.. down the line probably as I have >>> a K3S here and a K3 at the in-law's property. If I did get that 'last final >>> rig' and it was a K4 (Iikely as I don't have much in the shack since 2000 >>> that was not Elecraft) I would, as an older fellow then.. want the larger >>> visual display of the computer/IF out/NaP3 sort of solution. >>> >>> So, do I get some IF out I can use? >>> tnx >>> Brian VE3VAW > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K4 IF signal 'OUT' for external application useage
Except that an I/Q output would also enable the convenient use of other 3rd party software. If Elecraft didn't bother to include it in the K4, I think that's a mistake. Dave AB7E On 9/24/2020 11:58 AM, Buck wrote: As I recall, there is an HDMI output on the back of the K4. You can choose to have it display the front panel, the panadapter or both on an external monitor. You won't need to use I/Q to an LP-PAN. Buck, k4ia Honor Roll 8BDXCC EasyWayHamBooks.com On 9/24/2020 2:51 PM, Brian wrote: Looking at the recent (though long from complete) K4 guide, I don't see an IF OUT per se as I have in the accessory board in my K3 (or in fact the output I/Q from the KX3 I can run directly into my sound card on the computer). Does the XVTR IF OUT suffice for this? The reason I ask is that eventually my LP-PAN is going to die - hopefully not soon but I have been using it for quite some time now. I use the IF out from the K3 into the LP-PAN and then into NaP3. Now I do realize there is a panadapter on the K4 - obviously - but I DO enjoy (in fact pretty much need) the large computer display for the pana/spectrum display and DO use the NaP3 software controls for K3 functions on my keyboard and mouse for tuning and such. The display on the K4 is not the same thing I don't think. Even with some keyboard/mouse controls native to the K4 (?) the display size is a deterent to me as it exists. Apologies to the company. I assume maybe there MIGHT be a video card OUT re. the K4 panadapter at some time, but that is a maybe.. and more money. I won't be nearly the first to get a K4.. down the line probably as I have a K3S here and a K3 at the in-law's property. If I did get that 'last final rig' and it was a K4 (Iikely as I don't have much in the shack since 2000 that was not Elecraft) I would, as an older fellow then.. want the larger visual display of the computer/IF out/NaP3 sort of solution. So, do I get some IF out I can use? tnx Brian VE3VAW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K4 IF signal 'OUT' for external application useage
As I recall, there is an HDMI output on the back of the K4. You can choose to have it display the front panel, the panadapter or both on an external monitor. You won't need to use I/Q to an LP-PAN. Buck, k4ia Honor Roll 8BDXCC EasyWayHamBooks.com On 9/24/2020 2:51 PM, Brian wrote: Looking at the recent (though long from complete) K4 guide, I don't see an IF OUT per se as I have in the accessory board in my K3 (or in fact the output I/Q from the KX3 I can run directly into my sound card on the computer). Does the XVTR IF OUT suffice for this? The reason I ask is that eventually my LP-PAN is going to die - hopefully not soon but I have been using it for quite some time now. I use the IF out from the K3 into the LP-PAN and then into NaP3. Now I do realize there is a panadapter on the K4 - obviously - but I DO enjoy (in fact pretty much need) the large computer display for the pana/spectrum display and DO use the NaP3 software controls for K3 functions on my keyboard and mouse for tuning and such. The display on the K4 is not the same thing I don't think. Even with some keyboard/mouse controls native to the K4 (?) the display size is a deterent to me as it exists. Apologies to the company. I assume maybe there MIGHT be a video card OUT re. the K4 panadapter at some time, but that is a maybe.. and more money. I won't be nearly the first to get a K4.. down the line probably as I have a K3S here and a K3 at the in-law's property. If I did get that 'last final rig' and it was a K4 (Iikely as I don't have much in the shack since 2000 that was not Elecraft) I would, as an older fellow then.. want the larger visual display of the computer/IF out/NaP3 sort of solution. So, do I get some IF out I can use? tnx Brian VE3VAW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to radiok...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K4 IF signal 'OUT' for external application useage
Looking at the recent (though long from complete) K4 guide, I don't see an IF OUT per se as I have in the accessory board in my K3 (or in fact the output I/Q from the KX3 I can run directly into my sound card on the computer). Does the XVTR IF OUT suffice for this? The reason I ask is that eventually my LP-PAN is going to die - hopefully not soon but I have been using it for quite some time now. I use the IF out from the K3 into the LP-PAN and then into NaP3. Now I do realize there is a panadapter on the K4 - obviously - but I DO enjoy (in fact pretty much need) the large computer display for the pana/spectrum display and DO use the NaP3 software controls for K3 functions on my keyboard and mouse for tuning and such. The display on the K4 is not the same thing I don't think. Even with some keyboard/mouse controls native to the K4 (?) the display size is a deterent to me as it exists. Apologies to the company. I assume maybe there MIGHT be a video card OUT re. the K4 panadapter at some time, but that is a maybe.. and more money. I won't be nearly the first to get a K4.. down the line probably as I have a K3S here and a K3 at the in-law's property. If I did get that 'last final rig' and it was a K4 (Iikely as I don't have much in the shack since 2000 that was not Elecraft) I would, as an older fellow then.. want the larger visual display of the computer/IF out/NaP3 sort of solution. So, do I get some IF out I can use? tnx Brian VE3VAW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com