Re: [Elecraft] KX3 headset recommendation
Interesting to see this thread.. the K2 and K3 owned here have bags of audio transmit gain. This allows the heavy bass vowel sounds to be rolled off below about 300 hz. The KX3 seems to be slightly lacking in TX audio; the not-so-great fix here has been to construct a very small outboard single transistor mic amp. It is powered from a small 9 volt battery. I have tried using the mic bias directly to drive the mic preamp but got into rf feedback troubles. cheers Paul zl1ajy -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-headset-recommendation-tp7564383p757.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 headset recommendation
You need the ACC2 breakout cable from Elecraft. The PTT switch from Aircraft Spruce just plugs straight into that. You need to configure the menu item to say you want the contact closure to enable PTT. 73, Christian AK4VV On Jul 12, 2013 3:48 AM, KF5TEU bha...@flexbrite.com wrote: I ordered the aircraftsp What headset/mic/adapter were you using ? Thanks for the info.ruce PTT but I want to be sure I understand...you attached this PTT to the ACC2 port on the KX3 and youyou had a microphone/headset pluged into where exactly, mic in mic, headset in Phones or what ? Like others I'm looking for a wireless solution which may just be this PTT plus a musician style headset with mic and a pass-through wireless receiver/tx on the back of the KX3 that has a built in VOX to allow it to send and receive based on input either direction. No models yet but looking. -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-headset-recommendation-tp7564383p7576631.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 headset recommendation
On 7/13/2013 10:28 AM, Christian AK4VV wrote: You need the ACC2 breakout cable from Elecraft. The PTT switch from Aircraft Spruce just plugs straight into that. You need to configure the menu item to say you want the contact closure to enable PTT. you dont need the breakout cable to put a foot/hand ptt switch. you need a mono 2.5 mm headphone jack. and you need to fo into the menu and put the acc2 port into ptt_low. but if you plan to use a ptt and the amp then you need the breakout cable *KX3-PCKT Accessory Cable Set* The KX3-PCKT cable set interfaces between the Elecraft KX3 and personal computers, and provides convenient connection to an external foot switch and RF power amplifier./KX3-PCKT Instructions/ http://www.elecraft.com/manual/E740169%20KX3-PCKT%20Cable%20Set%20Instructions%20Rev%200.pdf 19.95 is well woth the money . yoou get all the needed cabl for the kx3. 73, Christian AK4VV On Jul 12, 2013 3:48 AM, KF5TEU bha...@flexbrite.com wrote: I ordered the aircraftsp What headset/mic/adapter were you using ? Thanks for the info.ruce PTT but I want to be sure I understand...you attached this PTT to the ACC2 port on the KX3 and youyou had a microphone/headset pluged into where exactly, mic in mic, headset in Phones or what ? Like others I'm looking for a wireless solution which may just be this PTT plus a musician style headset with mic and a pass-through wireless receiver/tx on the back of the KX3 that has a built in VOX to allow it to send and receive based on input either direction. No models yet but looking. -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-headset-recommendation-tp7564383p7576631.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 headset recommendation
O.K. I have the KPA100 ordered and the 500 hust got here so I will need the cable and I have it, came with my order as I addedvit in. I have the Heil headset as well for base use. So the PTT switch plugs into the ACC2 cable, that into ACC2 jack. Where are you using the mono 2.5mm headphone mono jack ? I have stereo headphones plugged into Phones. What are using for a mic, the little condenser type plugged directly into the Nic hack or a mic on the headsetvor what ? When menu is set to PTT kow , VOX isvoff then whenvyou push PTT does the mic become open for TX that iplugged in to Mic ? This means it has to be a buttonless nic ( no PTT ) so can I use a headset microphone like on standard cell phone or even Icom style ( different plug but maybe gain is high enough ) and just plug it's line into Mic ? 73 kF5TEU BillRichard Neese [via Elecraft] ml-node+s365791n7576670...@n2.nabble.com wrote:On 7/13/2013 10:28 AM, Christian AK4VV wrote: You need the ACC2 breakout cable from Elecraft. The PTT switch from Aircraft Spruce just plugs straight into that. You need to configure the menu item to say you want the contact closure to enable PTT. you dont need the breakout cable to put a foot/hand ptt switch. you need a mono 2.5 mm headphone jack. and you need to fo into the menu and put the acc2 port into ptt_low. but if you plan to use a ptt and the amp then you need the breakout cable *KX3-PCKT Accessory Cable Set* The KX3-PCKT cable set interfaces between the Elecraft KX3 and personal computers, and provides convenient connection to an external foot switch and RF power amplifier./KX3-PCKT Instructions/ http://www.elecraft.com/manual/E740169%20KX3-PCKT%20Cable%20Set%20Instructions%20Rev%200.pdf 19.95 is well woth the money . yoou get all the needed cabl for the kx3. 73, Christian AK4VV On Jul 12, 2013 3:48 AM, KF5TEU [hidden email] wrote: I ordered the aircraftsp What headset/mic/adapter were you using ? Thanks for the info.ruce PTT but I want to be sure I understand...you attached this PTT to the ACC2 port on the KX3 and youyou had a microphone/headset pluged into where exactly, mic in mic, headset in Phones or what ? Like others I'm looking for a wireless solution which may just be this PTT plus a musician style headset with mic and a pass-through wireless receiver/tx on the back of the KX3 that has a built in VOX to allow it to send and receive based on input either direction. No models yet but looking. -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-headset-recommendation-tp7564383p7576631.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html If you reply to this email, your message will be added to the discussion below: http://elecraft.365791.n2.nabble.com/KX3-headset-recommendation-tp7564383p7576670.html To unsubscribe from KX3 headset recommendation, click here. NAML -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-headset-recommendation-tp7564383p7576702.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 headset recommendation
On 7/13/2013 10:17 PM, KF5TEU wrote: O.K. I have the KPA100 ordered and the 500 hust got here so I will need the cable and I have it, came with my order as I addedvit in. I have the Heil headset as well for base use. So the PTT switch plugs into the ACC2 cable, that into ACC2 jack. yes Where are you using the mono 2.5mm headphone mono jack ? the ptt switch/hand button is a acc2 is a 2.5 mm jack mono it you dont have the breakout cable. if you have the breakout cable then its a 3.5mm mono jack I have stereo headphones plugged into Phones. What are using for a mic, the little condenser type plugged directly into the Nic hack or a mic on the headsetvor what ? When menu is set to PTT kow , VOX isvoff then whenvyou push PTT does the mic become open for TX that iplugged in to Mic ? This means it has to be a buttonless nic ( no PTT ) so can I use a headset microphone like on standard cell phone or even Icom style ( different plug but maybe gain is high enough ) and just plug it's line into Mic ? no you can use a standard desktop mic or a headset with a mic or a laptop mini mic. with a standard 3.5mm jack on it. you just have to change the mic bias setting in the menu to on, for this type of mic to work. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 headset recommendation
I ordered the aircraftsp What headset/mic/adapter were you using ? Thanks for the info.ruce PTT but I want to be sure I understand...you attached this PTT to the ACC2 port on the KX3 and youyou had a microphone/headset pluged into where exactly, mic in mic, headset in Phones or what ? Like others I'm looking for a wireless solution which may just be this PTT plus a musician style headset with mic and a pass-through wireless receiver/tx on the back of the KX3 that has a built in VOX to allow it to send and receive based on input either direction. No models yet but looking. -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-headset-recommendation-tp7564383p7576631.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 headset recommendation
Have a look at the new (August) QST on a Bluetooth headset a homebrew, very nice one. 73, Fred/N0AZZ K3 Ser # 6730--KX3 # 2573--K2/100 # 6470-KAT100 P3/SVGA--KPA500--KAT500--W2 -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of KF5TEU Sent: Friday, July 12, 2013 2:48 AM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] KX3 headset recommendation I ordered the aircraftsp What headset/mic/adapter were you using ? Thanks for the info.ruce PTT but I want to be sure I understand...you attached this PTT to the ACC2 port on the KX3 and youyou had a microphone/headset pluged into where exactly, mic in mic, headset in Phones or what ? Like others I'm looking for a wireless solution which may just be this PTT plus a musician style headset with mic and a pass-through wireless receiver/tx on the back of the KX3 that has a built in VOX to allow it to send and receive based on input either direction. No models yet but looking. -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-headset-recommendation-tp7564383p75 76631.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html - No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2904 / Virus Database: 3204/6484 - Release Date: 07/11/13 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 headset recommendation
The cheapest option (that works) is a PC headset from logitech. I have used mine without issue since day one. http://m1kta-qrp.blogspot.co.uk/2012/10/kx3-headset.html 72 Dom M1KTA On 12/07/13 10:20, Fred Smith wrote: Have a look at the new (August) QST on a Bluetooth headset a homebrew, very nice one. 73, Fred/N0AZZ K3 Ser # 6730--KX3 # 2573--K2/100 # 6470-KAT100 P3/SVGA--KPA500--KAT500--W2 -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of KF5TEU Sent: Friday, July 12, 2013 2:48 AM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] KX3 headset recommendation I ordered the aircraftsp What headset/mic/adapter were you using ? Thanks for the info.ruce PTT but I want to be sure I understand...you attached this PTT to the ACC2 port on the KX3 and youyou had a microphone/headset pluged into where exactly, mic in mic, headset in Phones or what ? Like others I'm looking for a wireless solution which may just be this PTT plus a musician style headset with mic and a pass-through wireless receiver/tx on the back of the KX3 that has a built in VOX to allow it to send and receive based on input either direction. No models yet but looking. -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-headset-recommendation-tp7564383p75 76631.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html - No virus found in this message. Checked by AVG - www.avg.com Version: 2013.0.2904 / Virus Database: 3204/6484 - Release Date: 07/11/13 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 headset recommendation
On Oct 21, 2012, at 7:37, Barry N1EU barry.n...@gmail.com wrote: I don't think you'll find any off-the-shelf headset with a compatible PTT switch. You can use the TX button on the front of the rig or VOX - both these headsets work well on VOX. Depends on what nature decided to do around you :).. I used this one with the ACC2 adapter in the cable kit for the KX3 with great success on a recent SOTA outing. Straight plug in, no hacking up of the connector needed. http://www.aircraftspruce.com/catalog/avpages/icomptt.php I strapped the velcro around my left hand so I could work the log with my right hand. Worked very well and no fumbling for the PTT. Made life very convenient and gave me space to spread out on the rock ledge to get comfortable. Aircraft Spruce has a number of other PTTs if you fancy something else btw. 73, Christian AK4VV __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 headset recommendation
The Plantronics headset I tried performed poorly. What worked quite well for me was a Yamaha CM-500 and a Microsoft LifeChat LX-2000. I don't think you'll find any off-the-shelf headset with a compatible PTT switch. You can use the TX button on the front of the rig or VOX - both these headsets work well on VOX. 73/GL, Barry N1EU -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-headset-recommendation-tp7564383p7564393.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 headset recommendation
Same deal here - happy with the Yamaha CM500 73 GL Ariel NY4G Sent from my iPad On Oct 21, 2012, at 7:15 AM, Barry N1EU barry.n...@gmail.com wrote: The Plantronics headset I tried performed poorly. What worked quite well for me was a Yamaha CM-500 and a Microsoft LifeChat LX-2000. I don't think you'll find any off-the-shelf headset with a compatible PTT switch. You can use the TX button on the front of the rig or VOX - both these headsets work well on VOX. 73/GL, Barry N1EU -- View this message in context: http://elecraft.365791.n2.nabble.com/KX3-headset-recommendation-tp7564383p7564393.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 headset recommendation
When you get your CM500 don't make the mistake I did - don't listen to music with them. On the other hand to see just how restricted the audio really is with them it is a good test. In a word - awful! They are quite comfortable though. Rick K2XT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 headset recommendation
I am using a Yamaha HPE100 microphone on my K3 with great results. I like how it sounds and always seems to provide ample punch. I want to get another one for the KX3. Keith AG6AZ Sent from my iPhone please excuse typos On Oct 21, 2012, at 6:07 AM, Rick Stealey rstea...@hotmail.com wrote: When you get your CM500 don't make the mistake I did - don't listen to music with them. On the other hand to see just how restricted the audio really is with them it is a good test. In a word - awful! They are quite comfortable though. Rick K2XT __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KX3 headset recommendation
Hi there. Any particular model of headset, to recommend for use with the KX3? Right now, I'm using a Plantronics .Audio 500 headset, which is nice because it has stereo RX (good for the KX3's audio effects) and it has convenient small analog connectors (perfectly compatible with the KX3). However, there's 2 drawbacks: 1) Not enough gain. I have the KX3 set to its maximum MIC gain of 40. Even with this, I'm not getting full voice modulation, at a comfortable speaking voice. I have to practically swallow the microphone, and then yell, in order to put out the full wattage. I have trouble lighting up all 5 bars of the ALC. Increasing the CMP level helps, but isn't a complete solution. I have CMP set to 20 now, having had it at the maximum of 30 before, but backed it down to get a little better sound quality. I know the headset microphone is sensitive and works well, because when used with the computer, it provides full volume at default settings, I even have to dial it down a bit to avoid saturation. I wonder what's different about the KX3 than a typical computer sound card, from the headset's point of view? Perhaps the wrong impedance? Sidetone is good, though, at level of 10. RX audio quality is great. I noticed the recent software upgrade increased the maximum allowed sidetone volume. I wonder if it's possible to increase the maximum allowed MIC gain similarly in software? Maybe have an overdrive feature, that shifts the bits left, so that even when the hardware is maxed out, software can still amplify it some more, at the cost of fidelity? Some cellphones have this, and it really helps to be heard. I tried both possible settings of MIC BIAS in the menu. Having None seemed to help a little, but it didn't make much of an overall difference. 2) No PTT button. I was hoping to use my CW straight key as PTT, but no such luck (I just sent another email about this). If I get another headset, I would like to get one with a button in the cord, that would be electrically compatible with what the KX3 expects. Any suggestions? Thanks! Josh K6JSH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 headset recommendation
Hi, Josh, I can't help with your current mic woes, but I use a $50 Yamaha CM500 headset with good results. MIC BIAS on, of course, for the electret mic. 73, Mickey N4MB On Oct 20, 2012, at 10:24 PM, Josh Lehan krel...@krellan.net wrote: Hi there. Any particular model of headset, to recommend for use with the KX3? Right now, I'm using a Plantronics .Audio 500 headset, which is nice because it has stereo RX (good for the KX3's audio effects) and it has convenient small analog connectors (perfectly compatible with the KX3). However, there's 2 drawbacks: 1) Not enough gain. I have the KX3 set to its maximum MIC gain of 40. Even with this, I'm not getting full voice modulation, at a comfortable speaking voice. I have to practically swallow the microphone, and then yell, in order to put out the full wattage. I have trouble lighting up all 5 bars of the ALC. Increasing the CMP level helps, but isn't a complete solution. I have CMP set to 20 now, having had it at the maximum of 30 before, but backed it down to get a little better sound quality. I know the headset microphone is sensitive and works well, because when used with the computer, it provides full volume at default settings, I even have to dial it down a bit to avoid saturation. I wonder what's different about the KX3 than a typical computer sound card, from the headset's point of view? Perhaps the wrong impedance? Sidetone is good, though, at level of 10. RX audio quality is great. I noticed the recent software upgrade increased the maximum allowed sidetone volume. I wonder if it's possible to increase the maximum allowed MIC gain similarly in software? Maybe have an overdrive feature, that shifts the bits left, so that even when the hardware is maxed out, software can still amplify it some more, at the cost of fidelity? Some cellphones have this, and it really helps to be heard. I tried both possible settings of MIC BIAS in the menu. Having None seemed to help a little, but it didn't make much of an overall difference. 2) No PTT button. I was hoping to use my CW straight key as PTT, but no such luck (I just sent another email about this). If I get another headset, I would like to get one with a button in the cord, that would be electrically compatible with what the KX3 expects. Any suggestions? Thanks! Josh K6JSH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
