Re: [Elecraft] Minor problem
Tried a power-cycle? 73 de M0XDF, K3 #174 -- Experience is that marvellous thing that enables you to recognize a mistake when you make it again. -Franklin P. Jones On 4 Feb 2010, at 00:57, Paul VanOveren wrote: Tonite when I entered the CONFIG MENU, the display reads,Auto and KAT3 and I can not change it with the B vfo knob... in the MAIN MENU, it reads Auto and some funny marks in the b vfo displayhelp !!! __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Minor problem
Tonite when I entered the CONFIG MENU, the display reads,Auto and KAT3 and I can not change it with the B vfo knob... in the MAIN MENU, it reads Auto and some funny marks in the b vfo displayhelp !!! Paul VanOveren __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Minor problem or K2 design quirk?
Don Wilhelm wrote: I only know of one other person who leaves their K2 powered on all the time - and Steve follows this reflector, so perhaps he will provide his experience. I don't yet, but I was considering leaving mine on 24/7 with some self-written software to scan a few beacon frequencies looking for band openings. I'm therefore also interested to hear how I might be affecting the life expectancy of the rig. I'd probably be band-changing more often than most of the other 24/7 K2s too, so any info on the expected lifetime of the relays would also be much appreciated. -- Nosey Nick Waterman, G7RZQ, K2 #5209. use Std::Disclaimer;[EMAIL PROTECTED] You never find the what you want, until you replace it. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Minor problem or K2 design quirk?
For the last 6 months, K2 #4913 has performed almost flawlessly - almost. Several times, I've returned to the shack and turned up the AF gain to find that the XFIL setting had changed. See, I never turn 4913 off - I just put all the controls and filters to a default setting, stow the mic and paddles then turn the AF gain down all the way. It's an old habit So, I come back to the shack to find XFIL set to 1 yet the rx audio is very narrow. Cycling through the XFIL selections, returning to #1, restores the audio. This has happened about 4 or 5 times since March. Anyone with a guess? Ken KG0WX K2 #4913, XG2, Tenna Dipper, HLA-150 _ On the road to retirement? Check out MSN Life Events for advice on how to get there! http://lifeevents.msn.com/category.aspx?cid=Retirement ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] Minor problem or K2 design quirk?
Ken, I can only guess, but that kind of behavior strongly suggests an intermittent connection (read = bad solder joint) somewhere. I only know of one other person who leaves their K2 powered on all the time - and Steve follows this reflector, so perhaps he will provide his experience. 73, Don W3FPR -Original Message- For the last 6 months, K2 #4913 has performed almost flawlessly - almost. Several times, I've returned to the shack and turned up the AF gain to find that the XFIL setting had changed. See, I never turn 4913 off - I just put all the controls and filters to a default setting, stow the mic and paddles then turn the AF gain down all the way. It's an old habit So, I come back to the shack to find XFIL set to 1 yet the rx audio is very narrow. Cycling through the XFIL selections, returning to #1, restores the audio. This has happened about 4 or 5 times since March. Anyone with a guess? Ken KG0WX K2 #4913, XG2, Tenna Dipper, HLA-150 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com