[Elecraft] Need help with 6 meter setup for KRC2 with K3

2016-01-22 Thread Lewis Phelps 
I know this topic has been on the list before, but all the discussion I have 
found raises questions but doesn’t give answers. 

I recently acquired a used RKC2, which I’m trying to set up with my K3 
(barefoot version; 12 watts and no KAT3)

My question concerns the mapping for 6 meters.

The K3 manual refers to the Menu setting for the KRC2 as follows:
===

"Controls the KRC2 band decoder’s accessory output settings. Shows ACC OFF or 
ACC1-3 if a KRC2 is detected; - - if not.
To ensure compatibility with both old and new KRC2 firmware, two different 6 
meter band decodes are provided. Tap to select BAND6=B6 (addr=10) or BAND6=B10 
(addr=9). Refer to the KRC2 manual for further details. 


However, I am unable to find anything in the KRC2 manual that discusses the 
mapping for the 6 meter band.  Presuming for discussion that I have “newer” 
firmware installed,

1. do I want to select BAND6=B6, or BAND6=B10? 

2.  what control line in the KRC2 should I use to energize devices associated 
with my 6 meter setup (e.g. coaxial relays used to connect the main K3 antenna 
port to an external 6 meter amplifier, rather than to my HF antenna).

ALSO

I find reference in prior discussion to  a Mac version of the KRC2 utility, but 
I can’t find it anywhere online. Does it exist?  Where might I get a copy? 

For that matter, where can I get ANY version of the KRC2 Utility that’s used 
for band mapping of the device? The only thing I can find on the Elecraft site 
is a Download program, not the utility that allows you to modify band mapping.

In sum, is there actually a way for me to use the KCR2 with my K3 in such a way 
that I can control external devices used for 6 meters? The K3 and RCR2 manuals 
are beyond opaque in this respect — a disappointing variance from the usual 
clarity of documentation. 

73

Lew N6LEW
Lew Phelps N6LEW
Pasadena, CA DM04wd
Elecraft K3-10 / KXV144 / XV432
Yaesu FT-7800 
l...@n6lew.us
www.n6lew.us

Generalized Law of Entropy: Sooner or later, everything that has been put 
together will fall apart.





__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Need help with 6 meter setup for KRC2 with K3

2016-01-22 Thread Lewis Phelps 
Thanks, Jack!.  This is very helpful.

I’d love to get a copy of your Mac utility. please email me offline so we can 
coordinate how to transfer it to me.

73

Lew N6LEW



> On Jan 22, 2016, at 5:35 PM, Jack Brindle  wrote:
> 
> Hi Lew;
> 
> See below…
> 
>> On Jan 22, 2016, at 3:08 PM, Lewis Phelps  wrote:
>> 
>> I know this topic has been on the list before, but all the discussion I have 
>> found raises questions but doesn’t give answers. 
>> 
>> I recently acquired a used RKC2, which I’m trying to set up with my K3 
>> (barefoot version; 12 watts and no KAT3)
>> 
>> My question concerns the mapping for 6 meters.
>> 
>> The K3 manual refers to the Menu setting for the KRC2 as follows:
>> ===
>> 
>> "Controls the KRC2 band decoder’s accessory output settings. Shows ACC OFF 
>> or ACC1-3 if a KRC2 is detected; - - if not.
>> To ensure compatibility with both old and new KRC2 firmware, two different 6 
>> meter band decodes are provided. Tap to select BAND6=B6 (addr=10) or 
>> BAND6=B10 (addr=9). Refer to the KRC2 manual for further details. 
>> 
>> 
>> However, I am unable to find anything in the KRC2 manual that discusses the 
>> mapping for the 6 meter band.  Presuming for discussion that I have “newer” 
>> firmware installed,
>> 
>> 1. do I want to select BAND6=B6, or BAND6=B10? 
> 
> BAND6=B6 will work with the 1.6 KRC2 firmware.
> 
>> 2.  what control line in the KRC2 should I use to energize devices 
>> associated with my 6 meter setup (e.g. coaxial relays used to connect the 
>> main K3 antenna port to an external 6 meter amplifier, rather than to my HF 
>> antenna).
> 
> XV1 with the standard mapping. You can set it to whatever you’d like with the 
> KRC2 Utility.
> 
> Also, you can restore the original settings and mappings by holding the F4 
> button at KRC2 power-up. This only works in the V1.6 firmware.
> 
>> ALSO
>> 
>> I find reference in prior discussion to  a Mac version of the KRC2 utility, 
>> but I can’t find it anywhere online. Does it exist?  Where might I get a 
>> copy? 
> 
> There is no official version of the KRC2 Utility for the Mac. I have one for 
> my own use that might be usable by others. Is this what you are looking for?
> 
>> For that matter, where can I get ANY version of the KRC2 Utility that’s used 
>> for band mapping of the device? The only thing I can find on the Elecraft 
>> site is a Download program, not the utility that allows you to modify band 
>> mapping.
> 
> The windows version is on the Elecraft site in the downloads and firmware 
> section for the KRC2. Try this URL:
> http://www.elecraft.com/software/KRC2/elecraft_KRC2_Config_software.htm 
> 
> 
>> In sum, is there actually a way for me to use the KCR2 with my K3 in such a 
>> way that I can control external devices used for 6 meters? The K3 and RCR2 
>> manuals are beyond opaque in this respect — a disappointing variance from 
>> the usual clarity of documentation.
> 
> Yes. See above.
> 
> 73,
> 
> Jack Brindle, W6FB

Lew Phelps N6LEW
Pasadena, CA DM04wd
Elecraft K3-10 / KXV144 / XV432
Yaesu FT-7800 
l...@n6lew.us
www.n6lew.us

Generalized Law of Entropy: Sooner or later, everything that has been put 
together will fall apart.





__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Need help with 6 meter setup for KRC2 with K3

2016-01-22 Thread Jack Brindle 
Hi Lew;

See below…

> On Jan 22, 2016, at 3:08 PM, Lewis Phelps  wrote:
> 
> I know this topic has been on the list before, but all the discussion I have 
> found raises questions but doesn’t give answers. 
> 
> I recently acquired a used RKC2, which I’m trying to set up with my K3 
> (barefoot version; 12 watts and no KAT3)
> 
> My question concerns the mapping for 6 meters.
> 
> The K3 manual refers to the Menu setting for the KRC2 as follows:
> ===
> 
> "Controls the KRC2 band decoder’s accessory output settings. Shows ACC OFF or 
> ACC1-3 if a KRC2 is detected; - - if not.
> To ensure compatibility with both old and new KRC2 firmware, two different 6 
> meter band decodes are provided. Tap to select BAND6=B6 (addr=10) or 
> BAND6=B10 (addr=9). Refer to the KRC2 manual for further details. 
> 
> 
> However, I am unable to find anything in the KRC2 manual that discusses the 
> mapping for the 6 meter band.  Presuming for discussion that I have “newer” 
> firmware installed,
> 
> 1. do I want to select BAND6=B6, or BAND6=B10? 

BAND6=B6 will work with the 1.6 KRC2 firmware.

> 2.  what control line in the KRC2 should I use to energize devices associated 
> with my 6 meter setup (e.g. coaxial relays used to connect the main K3 
> antenna port to an external 6 meter amplifier, rather than to my HF antenna).

XV1 with the standard mapping. You can set it to whatever you’d like with the 
KRC2 Utility.

Also, you can restore the original settings and mappings by holding the F4 
button at KRC2 power-up. This only works in the V1.6 firmware.

> ALSO
> 
> I find reference in prior discussion to  a Mac version of the KRC2 utility, 
> but I can’t find it anywhere online. Does it exist?  Where might I get a 
> copy? 

There is no official version of the KRC2 Utility for the Mac. I have one for my 
own use that might be usable by others. Is this what you are looking for?

> For that matter, where can I get ANY version of the KRC2 Utility that’s used 
> for band mapping of the device? The only thing I can find on the Elecraft 
> site is a Download program, not the utility that allows you to modify band 
> mapping.

The windows version is on the Elecraft site in the downloads and firmware 
section for the KRC2. Try this URL:
http://www.elecraft.com/software/KRC2/elecraft_KRC2_Config_software.htm

> In sum, is there actually a way for me to use the KCR2 with my K3 in such a 
> way that I can control external devices used for 6 meters? The K3 and RCR2 
> manuals are beyond opaque in this respect — a disappointing variance from the 
> usual clarity of documentation.

Yes. See above.

73,

Jack Brindle, W6FB

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com