Re: [Elecraft] No Output from K3S on WSJT MSK144

[John Stengrevics]

Thanks George,

Turns out it was a matter of settings on both the K3S and the WSJT software.

John
WA1EAZ

> On Feb 9, 2017, at 1:30 PM, George Thornton <gthorn...@thorntonmostullaw.com> 
> wrote:
> 
> I am not sure I understand your problem, and therefore my potential solution 
> may be irrelevant.
>  
> I experienced sudden extremely low power output recently during a contest.   
>  
> The solution was to re-install the firmware and recalibrate TX power.   <>
>  
> I later determined the cause was voltage drop coming from the power supply.  
> I fixed loose connections in my power supply and put a short lead from the 
> supply direct to the K3 and things are going well again.
>  
> Problem fixed at zero cost.
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net 
> <mailto:elecraft-boun...@mailman.qth.net>] On Behalf Of stengrevics
> Sent: Thursday, February 9, 2017 7:10 AM
> To: elecraft@mailman.qth.net <mailto:elecraft@mailman.qth.net>
> Subject: [Elecraft] No Output from K3S on WSJT MSK144
>  
> Was working fine, but today I have no output from the K3S on WSJT MSK144. If
> I select "Tune" on the WSJT screen and try to adjust the Mic gain control, I
> can't get any reading on the ALC meter. Any suggestions would be
> appreciated.
> 
> John
> WA1EAZ
> 
> 
> 
> --
> View this message in context: 
> http://elecraft.365791.n2.nabble.com/No-Output-from-K3S-on-WSJT-MSK144-tp7626575.html
>  
> <http://elecraft.365791.n2.nabble.com/No-Output-from-K3S-on-WSJT-MSK144-tp7626575.html>
> Sent from the Elecraft mailing list archive at Nabble.com 
> <http://nabble.com/>.
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft 
> <http://mailman.qth.net/mailman/listinfo/elecraft>
> Help: http://mailman.qth.net/mmfaq.htm <http://mailman.qth.net/mmfaq.htm>
> Post: mailto:Elecraft@mailman.qth.net <mailto:Elecraft@mailman.qth.net>
> 
> This list hosted by: http://www.qsl.net <http://www.qsl.net/>
> Please help support this email list: http://www.qsl.net/donate.html 
> <http://www.qsl.net/donate.html>
> Message delivered to gthorn...@thorntonmostullaw.com 
> <mailto:gthorn...@thorntonmostullaw.com>
> 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] No Output from K3S on WSJT MSK144

[John Stengrevics]

Don,

No, nothing in the LINE IN jack.

The audio setting on WSJT did also get changed.  I put it back on CODEC.

It is working now.  I had to set CONFIG > MIC SEL = LINE IN, and increase the 
power slider on the WSJT screen.

Thanks,

John
WA1EAZ

> On Feb 9, 2017, at 12:53 PM, Don Wilhelm  wrote:
> 
> John,
> 
> Is there any chance you plugged something into the K3S LINE IN jack? Doing so 
> turns off the CODEC audio out and the audio is taken from the LINE IN jack 
> only.
> 
> If nothing in the LINE IN jack, check the levels for the CODEC in your 
> computer.
> 
> 73,
> Don W3FPR
> 
> On 2/9/2017 10:10 AM, stengrevics wrote:
>> Was working fine, but today I have no output from the K3S on WSJT MSK144.  If
>> I select "Tune" on the WSJT screen and try to adjust the Mic gain control, I
>> can't get any reading on the ALC meter.  Any suggestions would be
>> appreciated.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] No Output from K3S on WSJT MSK144

[George Thornton]

I am not sure I understand your problem, and therefore my potential solution 
may be irrelevant.

I experienced sudden extremely low power output recently during a contest.

The solution was to re-install the firmware and recalibrate TX power.

I later determined the cause was voltage drop coming from the power supply.  I 
fixed loose connections in my power supply and put a short lead from the supply 
direct to the K3 and things are going well again.

Problem fixed at zero cost.
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of 
stengrevics
Sent: Thursday, February 9, 2017 7:10 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] No Output from K3S on WSJT MSK144

Was working fine, but today I have no output from the K3S on WSJT MSK144. If
I select "Tune" on the WSJT screen and try to adjust the Mic gain control, I
can't get any reading on the ALC meter. Any suggestions would be
appreciated.

John
WA1EAZ



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/No-Output-from-K3S-on-WSJT-MSK144-tp7626575.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to 
gthorn...@thorntonmostullaw.com<mailto:gthorn...@thorntonmostullaw.com>


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] No Output from K3S on WSJT MSK144

[Don Wilhelm]

John,

Is there any chance you plugged something into the K3S LINE IN jack? 
Doing so turns off the CODEC audio out and the audio is taken from the 
LINE IN jack only.


If nothing in the LINE IN jack, check the levels for the CODEC in your 
computer.


73,
Don W3FPR

On 2/9/2017 10:10 AM, stengrevics wrote:

Was working fine, but today I have no output from the K3S on WSJT MSK144.  If
I select "Tune" on the WSJT screen and try to adjust the Mic gain control, I
can't get any reading on the ALC meter.  Any suggestions would be
appreciated.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] No Output from K3S on WSJT MSK144

[Joe Subich, W4TV]

Check the "Master" level for "Speakers (USB Audio CODEC)" in Windows'
Volume Control.  If things got changed, perhaps your Windows Sound
Settings also got changed.

73,

   ... Joe, W4TV


On 2/9/2017 10:35 AM, John Stengrevics wrote:

Joe,

Thanks.  The MIC SEL did get changed somehow.  So, I now set it to LIN IN

DATA = DATA A

MIC + LIN = not APPL

I am connected via a USB cable from my MAC to the K3S.

The Power Slider on WSJT is set mid-way.

Now I do get output to drive my amp, but it’s not what it should be.  But, 
still no ability to adjust the ALC level if I select the “Tune” button on WSJT.

John
WA1EAZ


On Feb 9, 2017, at 10:26 AM, Joe Subich, W4TV  wrote:


Are you using DATA and data sub-mode DATA A?

Is MENU:MIC SEL = LIN IN?

Is MENU:MIC + LIN = OFF (or not APPL)?

Have you connected anything to the LINE IN jack?

Has the Soundcard Output changed in WSJT-X?

73,

  ... Joe, W4TV


On 2/9/2017 10:10 AM, stengrevics wrote:

Was working fine, but today I have no output from the K3S on WSJT MSK144.  If
I select "Tune" on the WSJT screen and try to adjust the Mic gain control, I
can't get any reading on the ALC meter.  Any suggestions would be
appreciated.

John
WA1EAZ



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/No-Output-from-K3S-on-WSJT-MSK144-tp7626575.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to li...@subich.com 



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] No Output from K3S on WSJT MSK144

[stengrevics]

Was working fine, but today I have no output from the K3S on WSJT MSK144.  If
I select "Tune" on the WSJT screen and try to adjust the Mic gain control, I
can't get any reading on the ALC meter.  Any suggestions would be
appreciated.

John
WA1EAZ



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/No-Output-from-K3S-on-WSJT-MSK144-tp7626575.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com