Re: [Elecraft] PL-259 connectors
I believe the technical name for that "putty like substance" in the Navy supply system was Monkey Shit. When I was a Radioman a long, long time ago, that's the only name ever used. 73 de W6OGC Jim Allen > That was my experience servicing radio installation on board large ships. We > used whatever the local supplier had on hand. After all, it's just a simple > two-circuit connector designed for 28 MHz or so (back then "UHF" was 28 MHz > and above, but there was really nothing above about 50 MHz before WWII). > > On connections open to the air (on a ship that meant constant salt spray) we > carefully sealed the connection with something like "Coax-Seal" - a putty > like sealant - followed by several layers of good quality electrical tape. > Connectors that I had installed that way a few years previously that I > needed to disconnect for some reason looked a good as the day I had > installed them, thousands and thousands of miles and years of salt water > later. > > Sent from my iPad __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] PL-259 connectors
My experience too. I might have inadvertently bought Amphenol connectors 60 years ago when the market was much smaller, and Amphenol market share was larger, but I never did it on purpose. The only connector failures I've had over the years, a comparative few, could be attributed to hasty construction on my part. But sometimes it's satisfying to use new brand name parts after decades of robbing connectors from old cables, both of unknown origin, because that's what you could afford. Building with a box of little packages from Digi-Key is a different experience than building with crap salvaged from the family's old TV. Eric KE6US On 5/19/2016 7:04 PM, Michael Walker wrote: I have used Generic PL259's for decades, and while I have had a few bad ones, they usually failed while I was soldering them. But for amateur use, they are fine. Correctly soldered, a connector shouldn't have an issue holding your body weight. :) (Flame retardant suit on) Mike va3mw On Thu, May 19, 2016 at 11:39 AM, Joe W2KJwrote: Believe I read somewhere that Amphenol connectors are being made in Mexico...not sure how long ago that got started. 73, Joe W2KJ I QRP, therefore I am On May 19, 2016, at 11:05 AM, Drew AF2Z wrote: It was an 83-1sp I recently bought that had defective threading. Let's face it: the name brand products of the past are not what they used to be, quality-wise. (Some others I will never buy again: Grundig, Levis, Herman boots...) Mental note to self regarding PL-259's-- check for defective threading before soldering connector to cable. 73, Drew AF2Z On 05/19/16 09:32, Ronnie Hull wrote: Type N connectors are great! I just don't see where is any gain to using them on HF! They will make NO difference on either end of your QSO. Most of the PL259's I see for sale today are crap. I'm a professional in the communications industry so I use both styles on a Dailey basis The 83-1SP's as sold by amphenol today are not anywhere near as good as they used to be. The silver coating on them doesn't take solder as easily as they once did! Glad I have plenty of the old ones! Ronnie w5sum Sent from Ronnie's IPhone __ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to va...@portcredit.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to eric_c...@hotmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] PL-259 connectors
Used PL259s on my 432 array,, was up for 15 year and taped and coated with silicon seal,, looked like new when I took them down and the match was 1.1 good connectors Bob K3DJC > On connections open to the air (on a ship that meant constant salt > spray) we > carefully sealed the connection with something like "Coax-Seal" - a > putty > like sealant - followed by several layers of good quality electrical > tape. > Connectors that I had installed that way a few years previously that > I > needed to disconnect for some reason looked a good as the day I had > installed them, thousands and thousands of miles and years of salt > water > later. > > 73, Ron AC7AC > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] PL-259 connectors
That was my experience servicing radio installation on board large ships. We used whatever the local supplier had on hand. After all, it's just a simple two-circuit connector designed for 28 MHz or so (back then "UHF" was 28 MHz and above, but there was really nothing above about 50 MHz before WWII). On connections open to the air (on a ship that meant constant salt spray) we carefully sealed the connection with something like "Coax-Seal" - a putty like sealant - followed by several layers of good quality electrical tape. Connectors that I had installed that way a few years previously that I needed to disconnect for some reason looked a good as the day I had installed them, thousands and thousands of miles and years of salt water later. 73, Ron AC7AC -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Michael Walker Sent: Thursday, May 19, 2016 7:04 PM To: Elecraft@mailman.qth.net Subject: Re: [Elecraft] PL-259 connectors I have used Generic PL259's for decades, and while I have had a few bad ones, they usually failed while I was soldering them. But for amateur use, they are fine. Correctly soldered, a connector shouldn't have an issue holding your body weight. :) (Flame retardant suit on) Mike va3mw On Thu, May 19, 2016 at 11:39 AM, Joe W2KJ <w...@bellsouth.net> wrote: > Believe I read somewhere that Amphenol connectors are being made in > Mexico...not sure how long ago that got started. > > 73, Joe W2KJ > I QRP, therefore I am > > On May 19, 2016, at 11:05 AM, Drew AF2Z wrote: > > > It was an 83-1sp I recently bought that had defective threading. > > Let's > face it: the name brand products of the past are not what they used to > be, quality-wise. (Some others I will never buy again: Grundig, Levis, > Herman > boots...) > > > > Mental note to self regarding PL-259's-- check for defective > > threading > before soldering connector to cable. > > > > > > > > 73, > > Drew > > AF2Z > > > > > > > > On 05/19/16 09:32, Ronnie Hull wrote: > >> Type N connectors are great! I just don't see where is any gain to > using them on HF! They will make NO difference on either end of your QSO. > >> Most of the PL259's I see for sale today are crap. I'm a > >> professional > in the communications industry so I use both styles on a Dailey basis > >> The 83-1SP's as sold by amphenol today are not anywhere near as > >> good as > they used to be. The silver coating on them doesn't take solder as > easily as they once did! > >> Glad I have plenty of the old ones! > >> > >> Ronnie w5sum > >> > >> Sent from Ronnie's IPhone > >> > >> > > > > > > __ > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > va...@portcredit.net > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to r...@elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] PL-259 connectors
I have used Generic PL259's for decades, and while I have had a few bad ones, they usually failed while I was soldering them. But for amateur use, they are fine. Correctly soldered, a connector shouldn't have an issue holding your body weight. :) (Flame retardant suit on) Mike va3mw On Thu, May 19, 2016 at 11:39 AM, Joe W2KJwrote: > Believe I read somewhere that Amphenol connectors are being made in > Mexico...not sure how long ago that got started. > > 73, Joe W2KJ > I QRP, therefore I am > > On May 19, 2016, at 11:05 AM, Drew AF2Z wrote: > > > It was an 83-1sp I recently bought that had defective threading. Let's > face it: the name brand products of the past are not what they used to be, > quality-wise. (Some others I will never buy again: Grundig, Levis, Herman > boots...) > > > > Mental note to self regarding PL-259's-- check for defective threading > before soldering connector to cable. > > > > > > > > 73, > > Drew > > AF2Z > > > > > > > > On 05/19/16 09:32, Ronnie Hull wrote: > >> Type N connectors are great! I just don't see where is any gain to > using them on HF! They will make NO difference on either end of your QSO. > >> Most of the PL259's I see for sale today are crap. I'm a professional > in the communications industry so I use both styles on a Dailey basis > >> The 83-1SP's as sold by amphenol today are not anywhere near as good as > they used to be. The silver coating on them doesn't take solder as easily > as they once did! > >> Glad I have plenty of the old ones! > >> > >> Ronnie w5sum > >> > >> Sent from Ronnie's IPhone > >> > >> > > > > > > __ > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to va...@portcredit.net > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] PL-259 connectors
Believe I read somewhere that Amphenol connectors are being made in Mexico...not sure how long ago that got started. 73, Joe W2KJ I QRP, therefore I am On May 19, 2016, at 11:05 AM, Drew AF2Z wrote: > It was an 83-1sp I recently bought that had defective threading. Let's face > it: the name brand products of the past are not what they used to be, > quality-wise. (Some others I will never buy again: Grundig, Levis, Herman > boots...) > > Mental note to self regarding PL-259's-- check for defective threading before > soldering connector to cable. > > > > 73, > Drew > AF2Z > > > > On 05/19/16 09:32, Ronnie Hull wrote: >> Type N connectors are great! I just don't see where is any gain to using >> them on HF! They will make NO difference on either end of your QSO. >> Most of the PL259's I see for sale today are crap. I'm a professional in the >> communications industry so I use both styles on a Dailey basis >> The 83-1SP's as sold by amphenol today are not anywhere near as good as they >> used to be. The silver coating on them doesn't take solder as easily as they >> once did! >> Glad I have plenty of the old ones! >> >> Ronnie w5sum >> >> Sent from Ronnie's IPhone >> >> > > > __ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] PL-259 connectors
On Thu,5/19/2016 8:05 AM, Drew AF2Z wrote: It was an 83-1sp I recently bought that had defective threading. I've seen this as well in perhaps 1% or less of the Amphenol 83-1SPs that I've bought and installed. The symptom is that the height of the thread is shorter than it should be, and you can't screw it onto a mating connector. I first saw this 2-3 years ago, and haven't seen it since. Perhaps QC caught it. 73, Jim K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] PL-259 connectors
It was an 83-1sp I recently bought that had defective threading. Let's face it: the name brand products of the past are not what they used to be, quality-wise. (Some others I will never buy again: Grundig, Levis, Herman boots...) Mental note to self regarding PL-259's-- check for defective threading before soldering connector to cable. 73, Drew AF2Z On 05/19/16 09:32, Ronnie Hull wrote: Type N connectors are great! I just don't see where is any gain to using them on HF! They will make NO difference on either end of your QSO. Most of the PL259's I see for sale today are crap. I'm a professional in the communications industry so I use both styles on a Dailey basis The 83-1SP's as sold by amphenol today are not anywhere near as good as they used to be. The silver coating on them doesn't take solder as easily as they once did! Glad I have plenty of the old ones! Ronnie w5sum Sent from Ronnie's IPhone __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] PL-259 connectors
Type N connectors are great! I just don't see where is any gain to using them on HF! They will make NO difference on either end of your QSO. Most of the PL259's I see for sale today are crap. I'm a professional in the communications industry so I use both styles on a Dailey basis The 83-1SP's as sold by amphenol today are not anywhere near as good as they used to be. The silver coating on them doesn't take solder as easily as they once did! Glad I have plenty of the old ones! Ronnie w5sum Sent from Ronnie's IPhone > On May 19, 2016, at 08:27, "j...@kk9a.com"wrote: > > Unfortunately probably no manufacture is using Amphenol jacks. I have had > N jack failures in equipment where non-Amphenol connectors lost their > spring and I previously owned an Acom amp that had very loose fitting > SO-239's. > > John KK9A > > from: Barry w2up > Thu May 19 08:01:25 EDT 2016 > > Do you think whatever you're plugging into uses Amphenol SO-239's? > > Barry W2UP > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to w5...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] PL-259 connectors
Unfortunately probably no manufacture is using Amphenol jacks. I have had N jack failures in equipment where non-Amphenol connectors lost their spring and I previously owned an Acom amp that had very loose fitting SO-239's. John KK9A from: Barry w2up Thu May 19 08:01:25 EDT 2016 Do you think whatever you're plugging into uses Amphenol SO-239's? Barry W2UP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] PL-259 connectors
Do you think whatever you're plugging into uses Amphenol SO-239's? Barry W2UP -- View this message in context: http://elecraft.365791.n2.nabble.com/PL-259-connectors-tp7617598p7617605.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] PL-259 connectors
I used Amphenol exclusively until they moved their manufacturing from the USA to Mexico. Now the 83-1SP is no longer stamped, (Engraved.) its printed. (Ink?) Same quality? It could be, but it doesn't appear to be. (Cheaper phenolic/Teflon?) I have a sizeable stash of USA-made Amphenol and J (NJ) connectors. This is very much on topic wrt Elecraft products since, with the practice of outsourcing local jobs offshore, there is some additional satisfaction that the majority of my hard earned money will trickle down to a dinner table in NJ, Tennessee, or... Aptos, CA. Some naysayers will say that there will always be more convenient offshore sources and they'd be correct, but you do what you can. If not now, then when? Vy 73 de Bert WA2SI Sent from my android device. -Original Message- From: Todd Ruby <t...@ruby-wine.com> To: elecraft@mailman.qth.net Sent: Thu, 19 May 2016 0:00 Subject: [Elecraft] PL-259 connectors Friends, The only PL-259 connectors any amateur should ever use are the ones from Amphenol stamped 83-1SP. If you don't believe me, you can easily discuss this issue with Frank, W3LPL. If you are at Dayton, he'll be covering various topics during Contest University or gabbing with contesters and DXers at the Crowne Plaza. He is a very good person to know if you don't know him already. 73 Todd WB2ZAB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to wa...@arrl.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] PL-259 connectors
I was lucky enough to purchase a master box of 1000 of those 83-1SP's back in the late 70's when they were REALLY silver plated. I have enough for a life time GREAT connectors and with them, no fool would ever need a Type N W5SUM -Original Message- From: Todd Ruby Sent: Wednesday, May 18, 2016 11:00 PM To: elecraft@mailman.qth.net Subject: [Elecraft] PL-259 connectors Friends, The only PL-259 connectors any amateur should ever use are the ones from Amphenol stamped 83-1SP. If you don't believe me, you can easily discuss this issue with Frank, W3LPL. If you are at Dayton, he'll be covering various topics during Contest University or gabbing with contesters and DXers at the Crowne Plaza. He is a very good person to know if you don't know him already. 73 Todd WB2ZAB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to w5...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] PL-259 connectors
Friends, The only PL-259 connectors any amateur should ever use are the ones from Amphenol stamped 83-1SP. If you don't believe me, you can easily discuss this issue with Frank, W3LPL. If you are at Dayton, he'll be covering various topics during Contest University or gabbing with contesters and DXers at the Crowne Plaza. He is a very good person to know if you don't know him already. 73 Todd WB2ZAB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] PL-259 Connectors
*Esteemed members of this group. Can anyone send me a link to a reputable supplier of quality PL-259 connectors as I need to renew my patch chords. It appears after sending email requests to numerous suppliers in VK they all seem to sell rubbish..aaah... In the interest of BW perhaps it is best you reply direct? i don't wish to start an another off topic lengthy discussion. I just want to order some decent connectors...:-) Regards to all. Gary * -- Gary VK4FD - Motorhome Mobile Elecraft Equipment K3 #679, KPA-500 #018 KAT-500#?? Living the dream!!! __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] PL-259 Connectors
How about these guys. They have been at this forever and sell quality. http://www.pasternack.com/ Chuck, KE9UW aka Jack, BMW Motorcycles BMWMOA #224 From: elecraft-boun...@mailman.qth.net [elecraft-boun...@mailman.qth.net] on behalf of Gary Gregory [garyvk...@gmail.com] Sent: Wednesday, May 23, 2012 7:48 AM To: Elecraft Subject: [Elecraft] PL-259 Connectors *Esteemed members of this group. Can anyone send me a link to a reputable supplier of quality PL-259 connectors as I need to renew my patch chords. It appears after sending email requests to numerous suppliers in VK they all seem to sell rubbish..aaah... In the interest of BW perhaps it is best you reply direct? i don't wish to start an another off topic lengthy discussion. I just want to order some decent connectors...:-) Regards to all. Gary * -- Gary VK4FD - Motorhome Mobile Elecraft Equipment K3 #679, KPA-500 #018 KAT-500#?? Living the dream!!! __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] PL-259 Connectors
I just checked that website and some of their prices. Way too high for my blood! DX Engineering at www.dxengineering.com ships worldwide. They sell silver/Teflon connectors (I use them and they are very good quality). Bill W2BLC -- IN GOD I TRUST (but, NOT a single politician) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] PL-259 Connectors
My vote. I have never had a bad experience with them. http://www.davisrf.com/ 73 de Bert WA2SI ...and all the pieces matter. -- Det. Lester Freamon, BPD Sent from my Verizon Wireless 4GLTE smartphone - Reply message - From: Gary Gregory garyvk...@gmail.com To: Elecraft elecraft@mailman.qth.net Subject: [Elecraft] PL-259 Connectors Date: Wed, May 23, 2012 08:48 *Esteemed members of this group. Can anyone send me a link to a reputable supplier of quality PL-259 connectors as I need to renew my patch chords. It appears after sending email requests to numerous suppliers in VK they all seem to sell rubbish..aaah... In the interest of BW perhaps it is best you reply direct? i don't wish to start an another off topic lengthy discussion. I just want to order some decent connectors...:-) Regards to all. Gary * -- Gary VK4FD - Motorhome Mobile Elecraft Equipment K3 #679, KPA-500 #018 KAT-500#?? Living the dream!!! __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] PL-259 Connectors
W3LPL recommends this one: http://www.mouser.com/ProductDetail/Amphenol-RF/83-1SP/?qs=qhgJLQbFbXlTrY%2furm6%2fdAkd3oX%2fdrWz3R1okn99EvE%3d and no other 73, Ross N4RP On 5/23/2012 8:48 AM, Gary Gregory wrote: *Esteemed members of this group. Can anyone send me a link to a reputable supplier of quality PL-259 connectors as I need to renew my patch chords. It appears after sending email requests to numerous suppliers in VK they all seem to sell rubbish..aaah... In the interest of BW perhaps it is best you reply direct? i don't wish to start an another off topic lengthy discussion. I just want to order some decent connectors...:-) Regards to all. Gary * -- FCC Section 97.313(a) “At all times, an amateur station must use the minimum transmitter power necessary to carry out the desired communications.” __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] PL-259 Connectors
On 5/23/2012 7:27 AM, Ross Primrose N4RP wrote: W3LPL recommends this one: Amphenol-RF/83-1SP He's not the only one who does -- so do I, and so do most serious RF engineers. 73, Jim K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html