Re: [Elecraft] Raspy audio on ssb on one band
Is this only on one end of the band, high or low, or is it constant across the entire band? On Sat, Nov 12, 2011 at 10:01 PM, cbscholl sch...@scholl.org wrote: I bought the radio used earlier in the year. I believe that it is sn in late 2000 but it was to factory in 2010 for upgrades. I listened on same antenna with ic-765 and no issues. Are there and settings which are band dependent that could be causing the problem? Barney On Nov 12, 2011, at 9:28 PM, w0mu [via Elecraft] ml-node+s365791n6989030...@n2.nabble.com wrote: The only distortion I have seen is with the NB on which he said he checked. Is this an early version of the radio? Maybe this is a case of oxidation on the connectors. Only hearing it one band makes this a very interesting problem. Mike W0MU J6M CQ WW DX CW Contest 2011 J6/W0MU November 21 - December 1 2011 W0MU-1 CC Cluster w0mu.net On 11/12/2011 7:25 PM, Don Wilhelm wrote: Whoops, I did not catch that on the first reading. I concede and have no easy answers. Even so, the SSB demodulation in the K3 is not band dependent either, so a good look at your antenna system and consideration for the reception of interfering signals from consumer devices are prime candidates for investigation. 73, Don W3FPR On 11/12/2011 9:15 PM, cbscholl wrote: Why would rf feedback be causing an issue on receive? Barney On Nov 12, 2011, at 8:46 PM, Don Wilhelm-4 [via Elecraft][hidden email] wrote: Barney, The most common cause for problems of that nature is RF feedback in the shack. If you have another receiver, listen to the transmitted audio while the K3 is connected to a dummy load. If there are no problems with that configuration, take a serious look at your antenna system for that troublesome band. There is nothing in the K3 modulation scheme that is band dependent - in other words, if it works OK on one band, it should work well on all bands unless something external to the K3 is causing a problem. 73, Don W3FPR On 11/12/2011 7:34 PM, cbscholl wrote: I believe that I am hearing raspy or slightly distorted audio on receive on my K3. It has current mods. I have noticed the problem only on 15 meters. The other band seem fine. Does anyone have any ideas or suggestions? Barney __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html If you reply to this email, your message will be added to the discussion below: http://elecraft.365791.n2.nabble.com/Raspy-audio-on-ssb-on-one-band-tp6988925p6989005.html To unsubscribe from Raspy audio on ssb on one band, click here. See how NAML generates this email -- View this message in context: http://elecraft.365791.n2.nabble.com/Raspy-audio-on-ssb-on-one-band-tp6988925p6989022.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html If you reply to this email, your message will be added to the discussion below: http://elecraft.365791.n2.nabble.com/Raspy-audio-on-ssb-on-one-band-tp6988925p6989030.html To unsubscribe from Raspy audio on ssb on one band, click here. See how NAML generates this email -- View this message in context: http://elecraft.365791.n2.nabble.com/Raspy-audio-on-ssb-on-one-band-tp6988925p6989060.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list:
Re: [Elecraft] Raspy audio on ssb on one band
I honestly do not know. I have only listened in ssb band. I have listed up at top or down in cq. I will try. Barney On Nov 13, 2011, at 2:42 PM, Guy, K2AV [via Elecraft] ml-node+s365791n6990641...@n2.nabble.com wrote: Is this only on one end of the band, high or low, or is it constant across the entire band? On Sat, Nov 12, 2011 at 10:01 PM, cbscholl [hidden email] wrote: I bought the radio used earlier in the year. I believe that it is sn in late 2000 but it was to factory in 2010 for upgrades. I listened on same antenna with ic-765 and no issues. Are there and settings which are band dependent that could be causing the problem? Barney On Nov 12, 2011, at 9:28 PM, w0mu [via Elecraft] [hidden email] wrote: The only distortion I have seen is with the NB on which he said he checked. Is this an early version of the radio? Maybe this is a case of oxidation on the connectors. Only hearing it one band makes this a very interesting problem. Mike W0MU J6M CQ WW DX CW Contest 2011 J6/W0MU November 21 - December 1 2011 W0MU-1 CC Cluster w0mu.net On 11/12/2011 7:25 PM, Don Wilhelm wrote: Whoops, I did not catch that on the first reading. I concede and have no easy answers. Even so, the SSB demodulation in the K3 is not band dependent either, so a good look at your antenna system and consideration for the reception of interfering signals from consumer devices are prime candidates for investigation. 73, Don W3FPR On 11/12/2011 9:15 PM, cbscholl wrote: Why would rf feedback be causing an issue on receive? Barney On Nov 12, 2011, at 8:46 PM, Don Wilhelm-4 [via Elecraft][hidden email] wrote: Barney, The most common cause for problems of that nature is RF feedback in the shack. If you have another receiver, listen to the transmitted audio while the K3 is connected to a dummy load. If there are no problems with that configuration, take a serious look at your antenna system for that troublesome band. There is nothing in the K3 modulation scheme that is band dependent - in other words, if it works OK on one band, it should work well on all bands unless something external to the K3 is causing a problem. 73, Don W3FPR On 11/12/2011 7:34 PM, cbscholl wrote: I believe that I am hearing raspy or slightly distorted audio on receive on my K3. It has current mods. I have noticed the problem only on 15 meters. The other band seem fine. Does anyone have any ideas or suggestions? Barney __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html If you reply to this email, your message will be added to the discussion below: http://elecraft.365791.n2.nabble.com/Raspy-audio-on-ssb-on-one-band-tp6988925p6989005.html To unsubscribe from Raspy audio on ssb on one band, click here. See how NAML generates this email -- View this message in context: http://elecraft.365791.n2.nabble.com/Raspy-audio-on-ssb-on-one-band-tp6988925p6989022.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html If you reply to this email, your message will be added to the discussion below: http://elecraft.365791.n2.nabble.com/Raspy-audio-on-ssb-on-one-band-tp6988925p6989030.html To unsubscribe from Raspy audio on ssb on one band, click here. See how NAML generates this email -- View this message in context:
[Elecraft] Raspy audio on ssb on one band
I believe that I am hearing raspy or slightly distorted audio on receive on my K3. It has current mods. I have noticed the problem only on 15 meters. The other band seem fine. Does anyone have any ideas or suggestions? Barney -- View this message in context: http://elecraft.365791.n2.nabble.com/Raspy-audio-on-ssb-on-one-band-tp6988925p6988925.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Raspy audio on ssb on one band
Is the noise blanker on? Mike W0MU J6M CQ WW DX CW Contest 2011 J6/W0MU November 21 - December 1 2011 W0MU-1 CC Cluster w0mu.net On 11/12/2011 5:34 PM, cbscholl wrote: I believe that I am hearing raspy or slightly distorted audio on receive on my K3. It has current mods. I have noticed the problem only on 15 meters. The other band seem fine. Does anyone have any ideas or suggestions? Barney -- View this message in context: http://elecraft.365791.n2.nabble.com/Raspy-audio-on-ssb-on-one-band-tp6988925p6988925.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Raspy audio on ssb on one band
That was the first thing I looked at. Barney On Nov 12, 2011, at 7:39 PM, w0mu [via Elecraft] ml-node+s365791n6988937...@n2.nabble.com wrote: Is the noise blanker on? Mike W0MU J6M CQ WW DX CW Contest 2011 J6/W0MU November 21 - December 1 2011 W0MU-1 CC Cluster w0mu.net On 11/12/2011 5:34 PM, cbscholl wrote: I believe that I am hearing raspy or slightly distorted audio on receive on my K3. It has current mods. I have noticed the problem only on 15 meters. The other band seem fine. Does anyone have any ideas or suggestions? Barney -- View this message in context: http://elecraft.365791.n2.nabble.com/Raspy-audio-on-ssb-on-one-band-tp6988925p6988925.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html If you reply to this email, your message will be added to the discussion below: http://elecraft.365791.n2.nabble.com/Raspy-audio-on-ssb-on-one-band-tp6988925p6988937.html To unsubscribe from Raspy audio on ssb on one band, click here. See how NAML generates this email -- View this message in context: http://elecraft.365791.n2.nabble.com/Raspy-audio-on-ssb-on-one-band-tp6988925p6988952.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Raspy audio on ssb on one band
Barney, The most common cause for problems of that nature is RF feedback in the shack. If you have another receiver, listen to the transmitted audio while the K3 is connected to a dummy load. If there are no problems with that configuration, take a serious look at your antenna system for that troublesome band. There is nothing in the K3 modulation scheme that is band dependent - in other words, if it works OK on one band, it should work well on all bands unless something external to the K3 is causing a problem. 73, Don W3FPR On 11/12/2011 7:34 PM, cbscholl wrote: I believe that I am hearing raspy or slightly distorted audio on receive on my K3. It has current mods. I have noticed the problem only on 15 meters. The other band seem fine. Does anyone have any ideas or suggestions? Barney __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Raspy audio on ssb on one band
Why would rf feedback be causing an issue on receive? Barney On Nov 12, 2011, at 8:46 PM, Don Wilhelm-4 [via Elecraft] ml-node+s365791n6989005...@n2.nabble.com wrote: Barney, The most common cause for problems of that nature is RF feedback in the shack. If you have another receiver, listen to the transmitted audio while the K3 is connected to a dummy load. If there are no problems with that configuration, take a serious look at your antenna system for that troublesome band. There is nothing in the K3 modulation scheme that is band dependent - in other words, if it works OK on one band, it should work well on all bands unless something external to the K3 is causing a problem. 73, Don W3FPR On 11/12/2011 7:34 PM, cbscholl wrote: I believe that I am hearing raspy or slightly distorted audio on receive on my K3. It has current mods. I have noticed the problem only on 15 meters. The other band seem fine. Does anyone have any ideas or suggestions? Barney __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html If you reply to this email, your message will be added to the discussion below: http://elecraft.365791.n2.nabble.com/Raspy-audio-on-ssb-on-one-band-tp6988925p6989005.html To unsubscribe from Raspy audio on ssb on one band, click here. See how NAML generates this email -- View this message in context: http://elecraft.365791.n2.nabble.com/Raspy-audio-on-ssb-on-one-band-tp6988925p6989022.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Raspy audio on ssb on one band
Whoops, I did not catch that on the first reading. I concede and have no easy answers. Even so, the SSB demodulation in the K3 is not band dependent either, so a good look at your antenna system and consideration for the reception of interfering signals from consumer devices are prime candidates for investigation. 73, Don W3FPR On 11/12/2011 9:15 PM, cbscholl wrote: Why would rf feedback be causing an issue on receive? Barney On Nov 12, 2011, at 8:46 PM, Don Wilhelm-4 [via Elecraft]ml-node+s365791n6989005...@n2.nabble.com wrote: Barney, The most common cause for problems of that nature is RF feedback in the shack. If you have another receiver, listen to the transmitted audio while the K3 is connected to a dummy load. If there are no problems with that configuration, take a serious look at your antenna system for that troublesome band. There is nothing in the K3 modulation scheme that is band dependent - in other words, if it works OK on one band, it should work well on all bands unless something external to the K3 is causing a problem. 73, Don W3FPR On 11/12/2011 7:34 PM, cbscholl wrote: I believe that I am hearing raspy or slightly distorted audio on receive on my K3. It has current mods. I have noticed the problem only on 15 meters. The other band seem fine. Does anyone have any ideas or suggestions? Barney __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html If you reply to this email, your message will be added to the discussion below: http://elecraft.365791.n2.nabble.com/Raspy-audio-on-ssb-on-one-band-tp6988925p6989005.html To unsubscribe from Raspy audio on ssb on one band, click here. See how NAML generates this email -- View this message in context: http://elecraft.365791.n2.nabble.com/Raspy-audio-on-ssb-on-one-band-tp6988925p6989022.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Raspy audio on ssb on one band
The only distortion I have seen is with the NB on which he said he checked. Is this an early version of the radio? Maybe this is a case of oxidation on the connectors. Only hearing it one band makes this a very interesting problem. Mike W0MU J6M CQ WW DX CW Contest 2011 J6/W0MU November 21 - December 1 2011 W0MU-1 CC Cluster w0mu.net On 11/12/2011 7:25 PM, Don Wilhelm wrote: Whoops, I did not catch that on the first reading. I concede and have no easy answers. Even so, the SSB demodulation in the K3 is not band dependent either, so a good look at your antenna system and consideration for the reception of interfering signals from consumer devices are prime candidates for investigation. 73, Don W3FPR On 11/12/2011 9:15 PM, cbscholl wrote: Why would rf feedback be causing an issue on receive? Barney On Nov 12, 2011, at 8:46 PM, Don Wilhelm-4 [via Elecraft]ml-node+s365791n6989005...@n2.nabble.com wrote: Barney, The most common cause for problems of that nature is RF feedback in the shack. If you have another receiver, listen to the transmitted audio while the K3 is connected to a dummy load. If there are no problems with that configuration, take a serious look at your antenna system for that troublesome band. There is nothing in the K3 modulation scheme that is band dependent - in other words, if it works OK on one band, it should work well on all bands unless something external to the K3 is causing a problem. 73, Don W3FPR On 11/12/2011 7:34 PM, cbscholl wrote: I believe that I am hearing raspy or slightly distorted audio on receive on my K3. It has current mods. I have noticed the problem only on 15 meters. The other band seem fine. Does anyone have any ideas or suggestions? Barney __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html If you reply to this email, your message will be added to the discussion below: http://elecraft.365791.n2.nabble.com/Raspy-audio-on-ssb-on-one-band-tp6988925p6989005.html To unsubscribe from Raspy audio on ssb on one band, click here. See how NAML generates this email -- View this message in context: http://elecraft.365791.n2.nabble.com/Raspy-audio-on-ssb-on-one-band-tp6988925p6989022.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Raspy audio on ssb on one band
I bought the radio used earlier in the year. I believe that it is sn in late 2000 but it was to factory in 2010 for upgrades. I listened on same antenna with ic-765 and no issues. Are there and settings which are band dependent that could be causing the problem? Barney On Nov 12, 2011, at 9:28 PM, w0mu [via Elecraft] ml-node+s365791n6989030...@n2.nabble.com wrote: The only distortion I have seen is with the NB on which he said he checked. Is this an early version of the radio? Maybe this is a case of oxidation on the connectors. Only hearing it one band makes this a very interesting problem. Mike W0MU J6M CQ WW DX CW Contest 2011 J6/W0MU November 21 - December 1 2011 W0MU-1 CC Cluster w0mu.net On 11/12/2011 7:25 PM, Don Wilhelm wrote: Whoops, I did not catch that on the first reading. I concede and have no easy answers. Even so, the SSB demodulation in the K3 is not band dependent either, so a good look at your antenna system and consideration for the reception of interfering signals from consumer devices are prime candidates for investigation. 73, Don W3FPR On 11/12/2011 9:15 PM, cbscholl wrote: Why would rf feedback be causing an issue on receive? Barney On Nov 12, 2011, at 8:46 PM, Don Wilhelm-4 [via Elecraft][hidden email] wrote: Barney, The most common cause for problems of that nature is RF feedback in the shack. If you have another receiver, listen to the transmitted audio while the K3 is connected to a dummy load. If there are no problems with that configuration, take a serious look at your antenna system for that troublesome band. There is nothing in the K3 modulation scheme that is band dependent - in other words, if it works OK on one band, it should work well on all bands unless something external to the K3 is causing a problem. 73, Don W3FPR On 11/12/2011 7:34 PM, cbscholl wrote: I believe that I am hearing raspy or slightly distorted audio on receive on my K3. It has current mods. I have noticed the problem only on 15 meters. The other band seem fine. Does anyone have any ideas or suggestions? Barney __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html If you reply to this email, your message will be added to the discussion below: http://elecraft.365791.n2.nabble.com/Raspy-audio-on-ssb-on-one-band-tp6988925p6989005.html To unsubscribe from Raspy audio on ssb on one band, click here. See how NAML generates this email -- View this message in context: http://elecraft.365791.n2.nabble.com/Raspy-audio-on-ssb-on-one-band-tp6988925p6989022.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[hidden email] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html If you reply to this email, your message will be added to the discussion below: http://elecraft.365791.n2.nabble.com/Raspy-audio-on-ssb-on-one-band-tp6988925p6989030.html To unsubscribe from Raspy audio on ssb on one band, click here. See how NAML generates this email -- View this message in context: http://elecraft.365791.n2.nabble.com/Raspy-audio-on-ssb-on-one-band-tp6988925p6989060.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
