[Elecraft] Setup Help
I have my K3 driving an Expert Amp. I set the K3 (with the ATU out) at 25W on each band to drive the Expert to full output. A lot of times I don’t want to turn on the amp and use the K3 “barefoot” at 100W with the ATU switched in. What is the simplest way to do this? I need to change the K3 power out for each band, switch the antenna, switch in the ATU. Is there some simple way to do this? Any suggestions would be appreciated. K6CG __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Setup Help
You might set up a command memory or two and use a PF button or two to adjust the power level between 25 and 100 watts. 73 de Dick, K6KR -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Richard Thorpe Sent: Monday, March 10, 2014 9:41 AM To: Elecraft List Subject: [Elecraft] Setup Help I have my K3 driving an Expert Amp. I set the K3 (with the ATU out) at 25W on each band to drive the Expert to full output. A lot of times I don't want to turn on the amp and use the K3 barefoot at 100W with the ATU switched in. What is the simplest way to do this? I need to change the K3 power out for each band, switch the antenna, switch in the ATU. Is there some simple way to do this? Any suggestions would be appreciated. K6CG __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Setup Help
Richard, I run the expert amp 1K FA with the K3. I run the KAT3 in bypass mode 100% of the time. I also use the amp barefoot sometimes through the amplifier using its antenna tuner in line. I am not completely clear on your line of questioning but feel free to contact me offline. 73, Keith AK6ZZ Sent from my iPhone please excuse typos On Mar 10, 2014, at 9:40 AM, Richard Thorpe kis...@me.com wrote: I have my K3 driving an Expert Amp. I set the K3 (with the ATU out) at 25W on each band to drive the Expert to full output. A lot of times I don’t want to turn on the amp and use the K3 “barefoot” at 100W with the ATU switched in. What is the simplest way to do this? I need to change the K3 power out for each band, switch the antenna, switch in the ATU. Is there some simple way to do this? Any suggestions would be appreciated. K6CG __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html