Thank you, Doug, that gave me all the info I needed. I have the BNC-connector
installed, so I will leave it for later, just in case...
Thank you and 73s de Franz, DK1ii
- Ursprüngliche Mail
> Von: Doug Joyce
> An: Franz Nieberding
> Gesendet: Donnerstag, den 29. Oktober 2009, 1:37:16 Uhr
> Betreff: Re: [Elecraft] TMp Cable and Allen Wrench Envelope
>
> Franz: You didn't indicate whether or not you have the KRX3 subreceiver
> installed in your K3. If you do there are two ways to connect the KRX3 to
> an antenna. Ref the "Main and SubReceiver Antenna Routing" section in the
> K3 Owner's Manual (pg 40 - 42 in my Rev D1 version).
>
> If the "spare" TMP cable is 12" long then it is likely to be used for an
> optional setup for the KRX3 Antenna Input. Ref the "Auxiliary KRX3 Antenna
> Input (Optional)" section of the KRX3 Installation and Operation Manual, pg
> 24 in my Rev C version). The "spare" 12" TMP cable is used to connect the
> KRX3 to its antenna via the KAT3 Antenna Tuner. Ref the "Installing KRX3
> AUX RF (ANT) Connector" section in the K3 Assembly Manual (pg 19 in my Rev
> F version). The 12" TMP cable is not used if the KRX3 AUX RF (ANT) BNC
> Connector has been installed, but is included in the kit if you wish to
> change the wiring configuration later.
>
> As to the Allen keys - there should be two supplied with the kit. The large
> one is for the set screws on the two main VFO knobs (A & B), the smaller one
> is for the set screw on all the other smaller knobs.
>
> Hope that helps and enjoy your new K3.
>
> 73 Doug, VE3MV
> K3/100 s/n 2432
>
>
> - Original Message -
> From: "Franz Nieberding"
> To:
> Sent: Wednesday, October 28, 2009 4:55 PM
> Subject: [Elecraft] TMp Cable and Allen Wrench Envelope
>
>
> > Hi all,
> > I am a proud new owner of a K3, which was handcarried by a friend to
> Europe. After a week or so he sent me two little envelopes, one with a TMP
> cable, one with a Allen wrench. I couldn't find a hint what to do with these
> little parts, are they a sparepart/tool for just in case or did I miss
> something and they are needed to bring the nice new toy up to speed? Maybe
> somebody can tell me, please.
> > 73s de Franz, DK1II
> > S/N 3535
> >
> >
> >
> >
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
> >
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html