I would suggest you may have a cable issue to test first. Try reconnecting the
connectors. And if you test at the site. There are so many variables, we
humans cannot help with being on site. Take a few cell photos and then post to
get help.
73,
Bill
K9YEQ
https://wrj-tech.com/
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Michael Walker
Sent: Sunday, July 15, 2018 8:23 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] W2 Sensor issue
I wonder if anyone has seen this before.
I was chasing a problem with high SWR on my 2K HF probe where on the radio, the
antenna SWR reads 1.3:1 without the SWR probe installed and 2.9:1 with it
installed.
Yes, I have changed my RG214 jumper cables to a few others. I even replace the
probe with a double female couple and the SWR dropped down to what I expected
(about 1.3:1).
It is only on 6M that it has bad readings. This is at my remote base, and
as I right this, I should have tested on a dummy load, but that will have to
happen on my next trip.
So, as I asked before, anyone else see it fail only on 6m?
Mike va3mw
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to k9...@live.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
