RE: [Elecraft] Minor problem or K2 design quirk?

[Don Wilhelm]

Ken,

I can only guess, but that kind of behavior strongly suggests an
intermittent connection (read = bad solder joint) somewhere.  I only know of
one other person who leaves their K2 powered on all the time - and Steve
follows this reflector, so perhaps he will provide his experience.

73,
Don W3FPR

> -Original Message-

>
> For the last 6 months, K2 #4913 has performed almost flawlessly - almost.
> Several times, I've returned to the shack and turned up the AF
> gain to find
> that the XFIL setting had changed.
>
> See, I never turn 4913 off - I just put all the controls and filters to a
> default setting, stow the
> mic and paddles then turn the AF gain down all the way. It's an old
> habit
>
> So, I come back to the shack to find XFIL set to 1 yet the rx
> audio is very
> narrow. Cycling through
> the XFIL selections, returning to #1, restores the audio. This
> has happened
> about 4 or 5 times
> since March.
>
> Anyone with a guess?
>
> Ken KG0WX
> K2 #4913, XG2,
> Tenna Dipper, HLA-150
>

___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Re: [Elecraft] Minor problem or K2 design quirk?

[Nick Waterman]

Don Wilhelm wrote:
> I only know of one other person who leaves their K2 powered on all
> the time - and Steve follows this reflector, so perhaps he will
> provide his experience.

I don't yet, but I was considering leaving mine on 24/7 with some
self-written software to scan a few beacon frequencies looking for band
openings.

I'm therefore also interested to hear how I might be affecting the life
expectancy of the rig. I'd probably be band-changing more often than
most of the other 24/7 K2s too, so any info on the expected lifetime of
the relays would also be much appreciated.

-- 
"Nosey" Nick Waterman, G7RZQ, K2 #5209.
use Std::Disclaimer;[EMAIL PROTECTED]
You never find the what you want, until you replace it.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com