RE: [Elecraft] microKeyer with K2/100
Thanks Craig: That answered several things. Yes, I have the K2 cable set. The audio 'J5' from that set terminates in a 1/8 stereo plug. It would seem that I would have to rig up something to parallel off of J5 and make a new1/8 connector to have stereo output. I wonder why I couldn't just use the headphones connector ? Did you make a new connector in this way ? As far as the microphone, I probably would just connect direct to the rig; I was just curious as to why it said only those listed microphones. 73, Jamie WB4YDL -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Craig Rairdin Sent: Wednesday, February 08, 2006 1:05 AM To: elecraft@mailman.qth.net Subject: RE: [Elecraft] microKeyer with K2/100 Did you get the K2 cable set with the microKEYER? That makes it a little easier. I hooked up the audio cable internal to the K2 as instructed and connected it to the microKEYER connector labelled J5. I'm using whatever the mic is that Elecraft sells so I can't comment on your mic. The Y serial cable goes to the KAT100, K2, and the computer end connects to the microKEYER. The microKEYER has a separate USB cable that goes to the computer. There was no gender-changer needed with the K2 cable set that came with it. I haven't figured out RTTY or PSK31. Just CW and phone. Those work great. I like that I can plug a spare keyboard into the microKEYER directly and just type CW if I need to. For contests my logging software drives everything just fine but if I need to intercede I can either use the paddles or keyboard without having to hit whatever combination of function keys lets me type CW through my logging program. Craig NZ0R K1 #1966 K2/100 #4941 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of James C. Hall, MD Sent: Tuesday, February 07, 2006 10:49 PM To: 'Elecraft Reflector' Subject: [Elecraft] microKeyer with K2/100 Hello all: I received a microKeyer for Christmas and am just now getting around to working with it. I reviewed the questions that were submitted to this reflector back in October, and I have a few questions. The microKeyer instructions for the K2 cable set involves what appears to be a cable to J5 to the rear panel for constant level stereo audio. Is this really necessary ? It states that only MH1, MD2, and Proset-K2 microphones will work with this unit. I have the SSB mic settings set for the Kenwood microphones and have used a Proset headset with the Kenwood adapter with the K2 without problems. Why would this not work via the microKeyer ? Are there settings that would make this more flexible ? I have the K2/100 and the KAT100. The serial communications cable is a jump cable from the K2 to the KAT to the computer. How can I maintain KAT functionality and use the microKeyer ? A DB-9 Y-cable at the K2 ? A gender changer at the computer end of the cable, then to the microKeyer ? Obviously, the idea is to use only the USB interface of the microKeyer. Thanks in advance. 73, Jamie WB4YDL ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] microKeyer with K2/100
It would seem that I would have to rig up something to parallel off of J5 and make a new1/8 connector to have stereo output. I wonder why I couldn't just use the headphones connector ? Did you make a new connector in this way ? If you use the headphone connector you disconnect the K2's speaker. You will still get audio through your computer but then you'll have to turn the computer on to use the radio at times when you're not using the microKEYER. Also the audio you get out of the computer may suck. My little laptop speaker sounds pretty horrible, though I can plug a headset into the laptop and it's not bad. I don't remember what the instructions for the microKEYER said, but that's how I did it. I ran the wire out an unused hole in the case and it terminates in a stereo plug. I don't remember if they included that wire/plug with the K2 cable or if I just dug a connector out of the parts drawer. This solution has the potential problem that you may not have an unused hole on the back of your K2. I used one of the XVTR holes, which I'll probably never use. (Though I haven't ruled it out yet.) Craig ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] microKeyer with K2/100
Yep, I'm using all but the XVTR holes now. It wouldn't be a big deal to mount a stereo 1/8 plug though. I'll investigate further. Thanks again. 73, Jamie WB4YDL -Original Message- From: Craig Rairdin [mailto:[EMAIL PROTECTED] Sent: Wednesday, February 08, 2006 12:51 PM To: 'James C. Hall, MD'; elecraft@mailman.qth.net Subject: RE: [Elecraft] microKeyer with K2/100 It would seem that I would have to rig up something to parallel off of J5 and make a new1/8 connector to have stereo output. I wonder why I couldn't just use the headphones connector ? Did you make a new connector in this way ? If you use the headphone connector you disconnect the K2's speaker. You will still get audio through your computer but then you'll have to turn the computer on to use the radio at times when you're not using the microKEYER. Also the audio you get out of the computer may suck. My little laptop speaker sounds pretty horrible, though I can plug a headset into the laptop and it's not bad. I don't remember what the instructions for the microKEYER said, but that's how I did it. I ran the wire out an unused hole in the case and it terminates in a stereo plug. I don't remember if they included that wire/plug with the K2 cable or if I just dug a connector out of the parts drawer. This solution has the potential problem that you may not have an unused hole on the back of your K2. I used one of the XVTR holes, which I'll probably never use. (Though I haven't ruled it out yet.) Craig ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] microKeyer with K2/100
James If you look in the box your cable came in you should find a female stereo 1/8 plug and about 12 inches of black shielded audio cable. I used a three pin Moldex style jack at J5 (same style as the frequency counter but with three pins) and then used a matching plug on the shielded wire. As far as the mike goes microHam are quite adamant that use only those mikes with that cable. I have not been able to get enough info yet to figure a way to use other mikes. I think the problem is that they have to assume that the Mic configuration header is done one way and they picked Elecraft/ Heil format as the most common. I am presently comparing the diagrams for the Kenwood cables sets and building a test cable to use a Kenwood desk mic. If I have success with the test cable I will pass the info on. If you make any progress let us know please. Jim VE3TTN On Feb 8, 2006, at 14:08, James C. Hall, MD wrote: Yep, I'm using all but the XVTR holes now. It wouldn't be a big deal to mount a stereo 1/8 plug though. I'll investigate further. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] microKeyer with K2/100
Did you get the K2 cable set with the microKEYER? That makes it a little easier. I hooked up the audio cable internal to the K2 as instructed and connected it to the microKEYER connector labelled J5. I'm using whatever the mic is that Elecraft sells so I can't comment on your mic. The Y serial cable goes to the KAT100, K2, and the computer end connects to the microKEYER. The microKEYER has a separate USB cable that goes to the computer. There was no gender-changer needed with the K2 cable set that came with it. I haven't figured out RTTY or PSK31. Just CW and phone. Those work great. I like that I can plug a spare keyboard into the microKEYER directly and just type CW if I need to. For contests my logging software drives everything just fine but if I need to intercede I can either use the paddles or keyboard without having to hit whatever combination of function keys lets me type CW through my logging program. Craig NZ0R K1 #1966 K2/100 #4941 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of James C. Hall, MD Sent: Tuesday, February 07, 2006 10:49 PM To: 'Elecraft Reflector' Subject: [Elecraft] microKeyer with K2/100 Hello all: I received a microKeyer for Christmas and am just now getting around to working with it. I reviewed the questions that were submitted to this reflector back in October, and I have a few questions. The microKeyer instructions for the K2 cable set involves what appears to be a cable to J5 to the rear panel for constant level stereo audio. Is this really necessary ? It states that only MH1, MD2, and Proset-K2 microphones will work with this unit. I have the SSB mic settings set for the Kenwood microphones and have used a Proset headset with the Kenwood adapter with the K2 without problems. Why would this not work via the microKeyer ? Are there settings that would make this more flexible ? I have the K2/100 and the KAT100. The serial communications cable is a jump cable from the K2 to the KAT to the computer. How can I maintain KAT functionality and use the microKeyer ? A DB-9 Y-cable at the K2 ? A gender changer at the computer end of the cable, then to the microKeyer ? Obviously, the idea is to use only the USB interface of the microKeyer. Thanks in advance. 73, Jamie WB4YDL ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
