Re: [K3] [Elecraft] Loud audio blast on power up
Hello John, it is tested here in OK-land (not on mine unit but on friend´s one) that if you can cure there is need to send only DSP1 plus DSP data tables again. No full package again, only DSP and tables. So uncheck the rest of modules in K3 Utility and go You will see result, here it was solution. Let us know... 73! L. -dst- John E. Reiser napsal(a): I noticed recently that on power up my K3 makes a noise for a fraction of a second. It sounds like background atmospheric noise as it would sound with the SSB filter active, even though the radio was last powered off with a CW filter set. I don't remember exactly when this behavior began, but it seems that it was in the last few beta firmware releases. In every other respect my K3 behaves normally. Obviously, this is no big deal. However, I did try reloading the latest beta version, as suggested on this reflector. I always use Send All Firmware to K3, which reloads the data tables. It didn't help. Could it be that recent firmware versions impose a slight delay before the filter selection stored on power down is implemented on power up? John, W2GW -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Dick Dievendorff Sent: Tuesday, November 25, 2008 12:47 PM To: 'Chuck - AE4CW'; elecraft@mailman.qth.net Subject: RE: [K3] [Elecraft] Loud audio blast on power up You can also load data tables (along with all the other firmware, a complete refresh) by clicking Send All Firmware to K3 on the Firmware tab without checking Advanced Mode. Advanced Mode has too many choices! Dick, K6KR -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Chuck - AE4CW Sent: Tuesday, November 25, 2008 9:24 AM To: elecraft@mailman.qth.net Subject: Re: [K3] [Elecraft] Loud audio blast on power up Shep, sorry for the late reply; I've been traveling. In the K3 Utility under View, check Advanced Mode. This will display a check box labeled *Always load DSP data tables*. Also, be sure to check all the appropriate boxes for loading the Firmware modules. This is the solution Gary provided back in March. Hopefully, it will work for your problem now. Chuck, AE4CW Chuck- I have the same problem. It started with V2.57. How do I reload data tables ? Thanks Shep - W2BSB I had this problem long ago; a reload of the firmware AND the data tables cured it. The trick was the data tables. Thanks to Gary at Elecraft. Chuck, AE4CW -- View this message in context: http://n2.nabble.com/Loud-audio-blast-on-power-up-tp1567485p1577277.html Sent from the [K3] mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [K3] [Elecraft] Loud audio blast on power up
Shep, sorry for the late reply; I've been traveling. In the K3 Utility under View, check Advanced Mode. This will display a check box labeled *Always load DSP data tables*. Also, be sure to check all the appropriate boxes for loading the Firmware modules. This is the solution Gary provided back in March. Hopefully, it will work for your problem now. Chuck, AE4CW Chuck- I have the same problem. It started with V2.57. How do I reload data tables ? Thanks Shep - W2BSB I had this problem long ago; a reload of the firmware AND the data tables cured it. The trick was the data tables. Thanks to Gary at Elecraft. Chuck, AE4CW -- View this message in context: http://n2.nabble.com/Loud-audio-blast-on-power-up-tp1567485p1577277.html Sent from the [K3] mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [K3] [Elecraft] Loud audio blast on power up
You can also load data tables (along with all the other firmware, a complete refresh) by clicking Send All Firmware to K3 on the Firmware tab without checking Advanced Mode. Advanced Mode has too many choices! Dick, K6KR -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Chuck - AE4CW Sent: Tuesday, November 25, 2008 9:24 AM To: elecraft@mailman.qth.net Subject: Re: [K3] [Elecraft] Loud audio blast on power up Shep, sorry for the late reply; I've been traveling. In the K3 Utility under View, check Advanced Mode. This will display a check box labeled *Always load DSP data tables*. Also, be sure to check all the appropriate boxes for loading the Firmware modules. This is the solution Gary provided back in March. Hopefully, it will work for your problem now. Chuck, AE4CW Chuck- I have the same problem. It started with V2.57. How do I reload data tables ? Thanks Shep - W2BSB I had this problem long ago; a reload of the firmware AND the data tables cured it. The trick was the data tables. Thanks to Gary at Elecraft. Chuck, AE4CW -- View this message in context: http://n2.nabble.com/Loud-audio-blast-on-power-up-tp1567485p1577277.html Sent from the [K3] mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [K3] [Elecraft] Loud audio blast on power up
I noticed recently that on power up my K3 makes a noise for a fraction of a second. It sounds like background atmospheric noise as it would sound with the SSB filter active, even though the radio was last powered off with a CW filter set. I don't remember exactly when this behavior began, but it seems that it was in the last few beta firmware releases. In every other respect my K3 behaves normally. Obviously, this is no big deal. However, I did try reloading the latest beta version, as suggested on this reflector. I always use Send All Firmware to K3, which reloads the data tables. It didn't help. Could it be that recent firmware versions impose a slight delay before the filter selection stored on power down is implemented on power up? John, W2GW -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Dick Dievendorff Sent: Tuesday, November 25, 2008 12:47 PM To: 'Chuck - AE4CW'; elecraft@mailman.qth.net Subject: RE: [K3] [Elecraft] Loud audio blast on power up You can also load data tables (along with all the other firmware, a complete refresh) by clicking Send All Firmware to K3 on the Firmware tab without checking Advanced Mode. Advanced Mode has too many choices! Dick, K6KR -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Chuck - AE4CW Sent: Tuesday, November 25, 2008 9:24 AM To: elecraft@mailman.qth.net Subject: Re: [K3] [Elecraft] Loud audio blast on power up Shep, sorry for the late reply; I've been traveling. In the K3 Utility under View, check Advanced Mode. This will display a check box labeled *Always load DSP data tables*. Also, be sure to check all the appropriate boxes for loading the Firmware modules. This is the solution Gary provided back in March. Hopefully, it will work for your problem now. Chuck, AE4CW Chuck- I have the same problem. It started with V2.57. How do I reload data tables ? Thanks Shep - W2BSB I had this problem long ago; a reload of the firmware AND the data tables cured it. The trick was the data tables. Thanks to Gary at Elecraft. Chuck, AE4CW -- View this message in context: http://n2.nabble.com/Loud-audio-blast-on-power-up-tp1567485p1577277.html Sent from the [K3] mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [K3] [Elecraft] Loud audio blast on power up
I had this problem long ago; a reload of the firmware AND the data tables cured it. The trick was the data tables. Thanks to Gary at Elecraft. Chuck, AE4CW Monty Shultes wrote: Mike - I have a similar phenomenon, but it's a soft blast, a burst of low audio as the radio turns on, followed by normal operation. Last 2 firmware loads exhibit this. I had a loud blast once before. Try reloading all the software and data tables, that fixed it for me. Monty K2DLJ When I turn the rig on there is a momentary loud blast from the speakers. It lasts maybe 250 milliseconds and then everything is normal. I get the phenomena when in CW, data, SSB modes. I do not see it show up in AM. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com -- View this message in context: http://n2.nabble.com/Loud-audio-blast-on-power-up-tp1567485p1568509.html Sent from the [K3] mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [K3] [Elecraft] Loud audio blast on power up
Chuck - AE4CW wrote: I had this problem long ago; a reload of the firmware AND the data tables cured it. The trick was the data tables. Thanks to Gary at Elecraft. Chuck, AE4CW Monty Shultes wrote: Mike - I have a similar phenomenon, but it's a soft blast, a burst of low audio as the radio turns on, followed by normal operation. Last 2 firmware loads exhibit this. I had a loud blast once before. Try reloading all the software and data tables, that fixed it for me. Monty K2DLJ When I turn the rig on there is a momentary loud blast from the speakers. It lasts maybe 250 milliseconds and then everything is normal. I get the phenomena when in CW, data, SSB modes. I do not see it show up in AM. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com -- View this message in context: http://n2.nabble.com/Loud-audio-blast-on-power-up-tp1567485p1569209.html Sent from the [K3] mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [K3] [Elecraft] Loud audio blast on power up
Chuck- I have the same problem. It started with V2.57. How do I reload data tables ? Thanks Shep - W2BSB Chuck - AE4CW wrote: I had this problem long ago; a reload of the firmware AND the data tables cured it. The trick was the data tables. Thanks to Gary at Elecraft. Chuck, AE4CW Monty Shultes wrote: Mike - I have a similar phenomenon, but it's a soft blast, a burst of low audio as the radio turns on, followed by normal operation. Last 2 firmware loads exhibit this. I had a loud blast once before. Try reloading all the software and data tables, that fixed it for me. Monty K2DLJ When I turn the rig on there is a momentary loud blast from the speakers. It lasts maybe 250 milliseconds and then everything is normal. I get the phenomena when in CW, data, SSB modes. I do not see it show up in AM. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com -- View this message in context: http://n2.nabble.com/Loud-audio-blast-on-power-up-tp1567485p1569219.html Sent from the [K3] mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [K3] [Elecraft] Loud audio blast on power up
When you run the Updater program, check DSP1 and, if you have the KRX3, DSP2 or check Always load DSP data tables. Ron AC7AC -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Shep Brokaw - W2BSB Sent: Sunday, November 23, 2008 10:53 AM To: elecraft@mailman.qth.net Subject: Re: [K3] [Elecraft] Loud audio blast on power up Chuck- I have the same problem. It started with V2.57. How do I reload data tables ? Thanks Shep - W2BSB Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
