Re: [Elecraft] K3 - TX EQ settings not remembered.
HiThis is explained in the manual.73 Tom Sent from my Samsung Galaxy smartphone. Original message From: Gary Smith Date: 2018-11-03 4:05 PM (GMT-05:00) To: Elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 - TX EQ settings not remembered. Folks, As several mentioned, Win4K3 might be the answer behind this issue. The problem was unwittingly caused on my end, I never set the Mic EQ in Win4K3, I really was only using it for the ability to interface WSJT along with all my other programs. I set the TX EQ values in Win4K3 to match those I set in the K3 and set that as default. Thus far I have not had the issue of my Tx settings being changed. Until things prove different, I will consider this issue closed. Thank you all for the help, I would have not guessed at this as the issue. 73, Gary KA1J __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to tom...@videotron.ca __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 - TX EQ settings not remembered.
Folks, As several mentioned, Win4K3 might be the answer behind this issue. The problem was unwittingly caused on my end, I never set the Mic EQ in Win4K3, I really was only using it for the ability to interface WSJT along with all my other programs. I set the TX EQ values in Win4K3 to match those I set in the K3 and set that as default. Thus far I have not had the issue of my Tx settings being changed. Until things prove different, I will consider this issue closed. Thank you all for the help, I would have not guessed at this as the issue. 73, Gary KA1J __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 - TX EQ settings not remembered.
It's been a while since I used Win4K3, but I believe the EQ settings can be set there. That's probably why yours are getting set back. 73, Randy, KS4L On Fri, Nov 2, 2018, 3:07 PM Don Wilhelm Gary, > > Email Tom (author of Win4K3) and see if he has some kind of workaround. > > 73, > Don W3FPR > > On 11/2/2018 3:59 PM, Gary Smith wrote: > > Don, > > > > I'll give your suggestion a try & see how > > that does. > > > > I do use Win4K3, I need it to use WSJT as > > WSJT doesn't like to share ports. I used > > to use LP-Bridge which let me > > simultaneously run all my software > > flawlessly, till WSJT... and I fast > > discovered it would not play nice unless > > WSJT had sole communication with my > > K3/K3s. > > > > With Win4K3 I can use all the software > > simultaneously including WSJT, logging > > program, N1MM & MMTTY without having to > > shut all the other software down every > > time I want to change modes or software. > > > > If it wasn't for WSJT making this issue, > > it would be simple to just keep doing what > > I was doing with LP-Bridge. As I do use > > MSK144 & some FT8 and want to keep my > > logging program running, I need to keep > > using Win4K3. > > > > Tom wrote a clever bit of software, > > perhaps there is a way to tell it not to > > change EQ settings, I'll have to check > > that too. > > > > Thanks & 73, > > > > Gary > > KA1J > > > > > > > > > > > >> Gary, > >> > >> Are you using any software to control the K3? > >> I have just been informed that Win4K3 will often change the EQ > >> settings. > >> > >> Remove the USB or RS-232 connection and try it with only the K3, then > >> set the SSB TX EQ. Check later to see if it has changed. > >> > >> 73, > >> Don W3FPR > >> > >> On 11/2/2018 3:29 PM, Gary Smith wrote: > >>> Hi Don, > >>> > >>> No, I set them for SSB and at a later time > >>> the TX EQ is flat and I have to change it > >>> back to the settings to fit my mic. I > >>> don't use AM except to listen to broadcast > >>> stations & listen to the nature of RFI. > >>> > >> > > > > > > > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to donw...@embarqmail.com > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to wrmoor...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 - TX EQ settings not remembered.
Gary, Email Tom (author of Win4K3) and see if he has some kind of workaround. 73, Don W3FPR On 11/2/2018 3:59 PM, Gary Smith wrote: Don, I'll give your suggestion a try & see how that does. I do use Win4K3, I need it to use WSJT as WSJT doesn't like to share ports. I used to use LP-Bridge which let me simultaneously run all my software flawlessly, till WSJT... and I fast discovered it would not play nice unless WSJT had sole communication with my K3/K3s. With Win4K3 I can use all the software simultaneously including WSJT, logging program, N1MM & MMTTY without having to shut all the other software down every time I want to change modes or software. If it wasn't for WSJT making this issue, it would be simple to just keep doing what I was doing with LP-Bridge. As I do use MSK144 & some FT8 and want to keep my logging program running, I need to keep using Win4K3. Tom wrote a clever bit of software, perhaps there is a way to tell it not to change EQ settings, I'll have to check that too. Thanks & 73, Gary KA1J Gary, Are you using any software to control the K3? I have just been informed that Win4K3 will often change the EQ settings. Remove the USB or RS-232 connection and try it with only the K3, then set the SSB TX EQ. Check later to see if it has changed. 73, Don W3FPR On 11/2/2018 3:29 PM, Gary Smith wrote: Hi Don, No, I set them for SSB and at a later time the TX EQ is flat and I have to change it back to the settings to fit my mic. I don't use AM except to listen to broadcast stations & listen to the nature of RFI. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to donw...@embarqmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 - TX EQ settings not remembered.
Don, I'll give your suggestion a try & see how that does. I do use Win4K3, I need it to use WSJT as WSJT doesn't like to share ports. I used to use LP-Bridge which let me simultaneously run all my software flawlessly, till WSJT... and I fast discovered it would not play nice unless WSJT had sole communication with my K3/K3s. With Win4K3 I can use all the software simultaneously including WSJT, logging program, N1MM & MMTTY without having to shut all the other software down every time I want to change modes or software. If it wasn't for WSJT making this issue, it would be simple to just keep doing what I was doing with LP-Bridge. As I do use MSK144 & some FT8 and want to keep my logging program running, I need to keep using Win4K3. Tom wrote a clever bit of software, perhaps there is a way to tell it not to change EQ settings, I'll have to check that too. Thanks & 73, Gary KA1J > Gary, > > Are you using any software to control the K3? > I have just been informed that Win4K3 will often change the EQ > settings. > > Remove the USB or RS-232 connection and try it with only the K3, then > set the SSB TX EQ. Check later to see if it has changed. > > 73, > Don W3FPR > > On 11/2/2018 3:29 PM, Gary Smith wrote: > > Hi Don, > > > > No, I set them for SSB and at a later time > > the TX EQ is flat and I have to change it > > back to the settings to fit my mic. I > > don't use AM except to listen to broadcast > > stations & listen to the nature of RFI. > > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 - TX EQ settings not remembered.
How are you turning off the K3? I seem to recall that some settings aren't saved if you turn it off by removing power. Dennis NJ6G On 11/2/2018 10:31, Gary Smith wrote: I seem to have an issue with the K3 memory settings for the microphone. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 - TX EQ settings not remembered.
Gary, Are you using any software to control the K3? I have just been informed that Win4K3 will often change the EQ settings. Remove the USB or RS-232 connection and try it with only the K3, then set the SSB TX EQ. Check later to see if it has changed. 73, Don W3FPR On 11/2/2018 3:29 PM, Gary Smith wrote: Hi Don, No, I set them for SSB and at a later time the TX EQ is flat and I have to change it back to the settings to fit my mic. I don't use AM except to listen to broadcast stations & listen to the nature of RFI. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 - TX EQ settings not remembered.
Hi Don, No, I set them for SSB and at a later time the TX EQ is flat and I have to change it back to the settings to fit my mic. I don't use AM except to listen to broadcast stations & listen to the nature of RFI. It was when in AM I was listening to RFI that I thought to check the TX EQ settings and found them different than I had made them. When I thought to see if they were like that in SSB again, I found the values there all 0. I then checked different bands and none of them had my saved TX EQ on SSB. 73, Gary KA1J > Gary, > > The EQ settings are per-mode. > If you set them for SSB mode and then go to AM mode, you will find > them set flat. > > Is that possibly the problem? > > 73, > Don W3FPR > > On 11/2/2018 1:31 PM, Gary Smith wrote: > > I seem to have an issue with the K3 memory > > settings for the microphone. I changed the > > TX EQ to match settings and now when I > > check, the TX EQ is back to flat again. > > This has been happening since I set the > > values. I've had to restore the values I > > know them by heart and can do it quickly. > > Still, I don't know when they get lost so > > I always have to keep checking to be sure > > they are still active. > > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 - TX EQ settings not remembered.
Gary, The EQ settings are per-mode. If you set them for SSB mode and then go to AM mode, you will find them set flat. Is that possibly the problem? 73, Don W3FPR On 11/2/2018 1:31 PM, Gary Smith wrote: I seem to have an issue with the K3 memory settings for the microphone. I changed the TX EQ to match settings and now when I check, the TX EQ is back to flat again. This has been happening since I set the values. I've had to restore the values I know them by heart and can do it quickly. Still, I don't know when they get lost so I always have to keep checking to be sure they are still active. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com