Re: [Elecraft] K3 Beta Firmware Rev. 4.03: CW+ mode (Ultra-fast break-in; VOX-CW up to 100 WPM)
KK7P wrote: I tried it and had no trouble copying using Cocoamodem on a Mac, and MMTTY on a PC, as well as another K3's internal decoder. I sent FSK using MMTTY and a RigExpert Plus interface, and had no trouble copying on the Cocamodem/Mac and on antoehr K3's internal decoder. Might just be a case of the wrong FSK polarity setting in the CONFIG menu? Never having used FSK before, I didn't even know there was such a setting. I just used DATA MD to set RTTY 75 as directed. I'll have a look and see if it makes a difference. Thanks. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Beta-Firmware-Rev-3-57-Synchronous-AM-Detection-AM-S-misc-improvements-tp3983997p5180898.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Beta Firmware Rev. 4.03: CW+ mode (Ultra-fast break-in; VOX-CW up to 100 WPM)
KK7P wrote: Might just be a case of the wrong FSK polarity setting in the CONFIG menu? Yep, that seems to be the answer. CONFIG FSK POL has to be 1. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Beta-Firmware-Rev-3-57-Synchronous-AM-Detection-AM-S-misc-improvements-tp3983997p5181437.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Beta Firmware Rev. 4.03: CW+ mode (Ultra-fast break-in; VOX-CW up to 100 WPM)
On Mon, 14 Jun 2010 10:02:57 -0700, you wrote: * FIXED FSK-D STUCK TONE: Occasionally, sending RTTY using the keyer paddle (FSK-D) would leave sidetone on. Hmmm... CW(KY command) Occasionally stuck with tone when aborted before finish sending, is not fixed. -- OV1A Jens Whoever ordered pizza by fax, please clean the machine. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Beta Firmware Rev. 4.03: CW+ mode (Ultra-fast break-in; VOX-CW up to 100 WPM)
wayne burdick wrote: K3 beta-test firmware revision 4.02 (with DSP rev. 2.60) is now available. See full release notes below. [snip] * 75 BAUD (100 WPM) RTTY SUPPORT: The built-in encoder/decoder (DATA/FSK-D) now supports both 45 and 75 baud. To select the desired rate, hold the DATA MD switch, then rotate VFO A. Has anyone tried the built-in RTTY? When I tried it, I could copy other stations perfectly but no-one would come back to me. Eventually I set up another receiver to see if I could copy it and I found I had to reverse the sideband before I could decode the text. - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-Beta-Firmware-Rev-3-57-Synchronous-AM-Detection-AM-S-misc-improvements-tp3983997p5179639.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Beta Firmware Rev. 4.03: CW+ mode (Ultra-fast break-in; VOX-CW up to 100 WPM)
* 75 BAUD (100 WPM) RTTY SUPPORT: The built-in encoder/decoder (DATA/FSK-D) now supports both 45 and 75 baud. To select the desired rate, hold the DATA MD switch, then rotate VFO A. Has anyone tried the built-in RTTY? When I tried it, I could copy other stations perfectly but no-one would come back to me... I tried it and had no trouble copying using Cocoamodem on a Mac, and MMTTY on a PC, as well as another K3's internal decoder. I sent FSK using MMTTY and a RigExpert Plus interface, and had no trouble copying on the Cocamodem/Mac and on antoehr K3's internal decoder. Might just be a case of the wrong FSK polarity setting in the CONFIG menu? 73, Lyle KK7P - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Beta Firmware Rev. 4.03: CW+ mode (Ultra-fast break-in; VOX-CW up to 100 WPM)
I tried it over the weekend when the RTTY contest was going on and used FSK for the first time... Was able to get a few to come back to me then had to rush back out and get back to work on the fence... ~Brett (N7MG) On Mon, 2010-06-14 at 15:45 -0700, Julian, G4ILO wrote: Has anyone tried the built-in RTTY? When I tried it, I could copy other stations perfectly but no-one would come back to me. Eventually I set up another receiver to see if I could copy it and I found I had to reverse the sideband before I could decode the text. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Beta Firmware Rev. 4.03: CW+ mode (Ultra-fast break-in; VOX-CW up to 100 WPM)
I use the cw to rtty all the time, here in KH6. However, I have not found anyone using thge 75wpm..few sigs get out here. If you don't change direction you WILL arrive exactly where you're headed!! Susan Meckley, Skipper W7KFI-mm AFA9SM USSV DHARMA --- On Mon, 6/14/10, Lyle Johnson k...@wavecable.com wrote: From: Lyle Johnson k...@wavecable.com Subject: Re: [Elecraft] K3 Beta Firmware Rev. 4.03: CW+ mode (Ultra-fast break-in; VOX-CW up to 100 WPM) To: Julian, G4ILO julian.g4...@gmail.com Cc: elecraft@mailman.qth.net Date: Monday, June 14, 2010, 12:50 PM * 75 BAUD (100 WPM) RTTY SUPPORT: The built-in encoder/decoder (DATA/FSK-D) now supports both 45 and 75 baud. To select the desired rate, hold the DATA MD switch, then rotate VFO A. Has anyone tried the built-in RTTY? When I tried it, I could copy other stations perfectly but no-one would come back to me... I tried it and had no trouble copying using Cocoamodem on a Mac, and MMTTY on a PC, as well as another K3's internal decoder. I sent FSK using MMTTY and a RigExpert Plus interface, and had no trouble copying on the Cocamodem/Mac and on antoehr K3's internal decoder. Might just be a case of the wrong FSK polarity setting in the CONFIG menu? 73, Lyle KK7P - Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html