The Auto-Spot function performs best when the filter is narrow. I find no
problems
when the filter is set at 500 Hz. It also works in PSK but not (yet) for FSK.
-
73,
Greg - AB7R
Whidbey Island WA
NA-065
K3#0009
On Fri Feb 15 5:46 , [EMAIL PROTECTED] sent:
Hi Charles,
You might want to try [EMAIL PROTECTED] (or
[EMAIL PROTECTED]) for numbers one and two.
Concerning #1) Do you have NR turned on when you hear the bursts?
There was a problem with this several firmware revisions ago.
Concerning #2) Here in Europe I have not noticed anything like this,
and there are medium and short wave transmitters roughly 4 to 5 miles
from our club station, where I usually have my K3. Are you sure that
these products are being produced in your K3 and, for example, not by
oxidized connectors or the like?
Do not know how to adjust the manual notch.
It's in the manual, page 24: Hold MAN to adjust the manual notch frequency
using VFO B. This also selects manual notch.
Auto SPOT seems not to work every time
My experience is, if a signal is not strong enough or if there is more
than one signal audible then it does have problems auto-tuning.
vy 73 de toby
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com