Re: [Elecraft] K3S AGC action in CW
Hi Don, aha, that's makes sense. Thank you for explanation. best regards, Petr, OK1RP On Mon, Jul 22, 2019, at 5:48 PM, Don Wilhelm wrote: > Petr, > > It does change to slow AGC, but any custom settings remain in place. > > 73, > Don W3FPR > > On 7/22/2019 11:39 AM, Petr, OK1RP/M0SIS wrote: > > Roger, > > > > you would like to say that when I will enable CW decoder the AGC system > > ignore all custom's settings and going to use default Slow AGC template > > config? Somehow I don't want to believe it... > -- 73 - Petr, OK1RP -- B: http://goo.gl/Fd2JhJ MeWe: https://bit.ly/2HGPoDx MeWe: https://bit.ly/2FmwvDt __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3S AGC action in CW
Petr, It does change to slow AGC, but any custom settings remain in place. 73, Don W3FPR On 7/22/2019 11:39 AM, Petr, OK1RP/M0SIS wrote: Roger, you would like to say that when I will enable CW decoder the AGC system ignore all custom's settings and going to use default Slow AGC template config? Somehow I don't want to believe it... __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3S AGC action in CW
Roger, you would like to say that when I will enable CW decoder the AGC system ignore all custom's settings and going to use default Slow AGC template config? Somehow I don't want to believe it... - 73 - Petr, OK1RP "Apple & Elecraft freak" B:http://ok1rp.blogspot.com MeWe: https://bit.ly/2HGPoDx MeWe: https://bit.ly/2FmwvDt -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3S AGC action in CW
Alright I understand. J By browsing the firmware archive I found a pretty old firmware version announcing an the implementation of an independent AGC system whenever “CW Decode“ is enabled. I enabled this function a while ago to see how good it is compared to human ears and brain and being lazy I let it enabled. So if you enable CW Decode the AGC will be locked to what is “slow” (with the default values). Disabling CW Decode the radio returns to the regular AGC system and works as in all other modes. Hope this helps someone else now or in the future…….. 73, Roger, DL5RBW From: Dave Sublette [mailto:k4to.d...@gmail.com] Sent: Friday, July 19, 2019 6:52 PM To: Roger Subject: Re: [Elecraft] K3S AGC action in CW No,no. You can't get off that easy. You must tell why the problem occurred and how it was solved. 😀 Dave K4TO On Fri, Jul 19, 2019, 12:47 PM Roger wrote: Please ignore - problem solved! 73/Roger - DL5RBW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k...@arrl.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3S AGC action in CW
How was it resolved? Frank > On Jul 19, 2019, at 11:46 AM, Roger wrote: > > Please ignore - problem solved! > > 73/Roger - DL5RBW > > > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to kg9hfr...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3S AGC action in CW
Please ignore - problem solved! 73/Roger - DL5RBW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3S AGC action in CW
That was the first thing I did (including reading and rereading the manual) however changing the settings didn´t affect the AGC action in CW. The AGC settings are identical in all modes (default) therefore I would expect identical behavior in all modes. And in fact it does EXCEPT for CW. No matter whether AGC is set to fast or slow in CW it stays slow. 73/Roger - DL5RBW -Original Message- From: Ken K3IU [mailto:kenk...@cox.net] Sent: Friday, July 19, 2019 12:34 PM To: Roger; elecraft@mailman.qth.net Subject: Re: [Elecraft] K3S AGC action in CW There are numerous AGC adjustments available in the CONFIG menu. You can probably find something to suit you there. 73, Ken K3IU On 7/19/2019 4:14 AM, Roger wrote: > Hi, > > when operating the K3S in CW mode I found there is no difference in > switching between AGC-F(ast) and AGC-S(slow). It seems the "default" > setting is on slow and does not go to fast (compared to the decay > characteristic in SSB). > The manual explains that the AGC Fast/Slow response should also be > effective in CW. > > Can anyone confirm this behavior (or not)? > > Firmware version is 5.66 (actually supposed to be 5.67 with the > "label" of the previous version). > > 73/Roger - DL5RBW > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html Message delivered to > kenk...@cox.net > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3S AGC action in CW
There are numerous AGC adjustments available in the CONFIG menu. You can probably find something to suit you there. 73, Ken K3IU On 7/19/2019 4:14 AM, Roger wrote: Hi, when operating the K3S in CW mode I found there is no difference in switching between AGC-F(ast) and AGC-S(slow). It seems the "default" setting is on slow and does not go to fast (compared to the decay characteristic in SSB). The manual explains that the AGC Fast/Slow response should also be effective in CW. Can anyone confirm this behavior (or not)? Firmware version is 5.66 (actually supposed to be 5.67 with the "label" of the previous version). 73/Roger - DL5RBW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to kenk...@cox.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3S AGC action in CW
Roger, My K3s AGC works as expected -- goodluck. 73, Roy K6XK Hi, when operating the K3S in CW mode I found there is no difference in switching between AGC-F(ast) and AGC-S(slow). It seems the "default" setting is on slow and does not go to fast (compared to the decay characteristic in SSB). The manual explains that the AGC Fast/Slow response should also be effective in CW. Can anyone confirm this behavior (or not)? Firmware version is 5.66 (actually supposed to be 5.67 with the "label" of the previous version). 73/Roger - DL5RBW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k...@ncn.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com