Re: [Elecraft] KPA-800 & KPA 1500
With the exception of 6m, you have essentially that capability available in the Tokyo Hy-Power HL-2.5KFX which, thanks to Elecraft's loan of a new K3 for the show (thanks again Eric!), was being demonstrated in the Array Solutions booth this weekend in Dayton. In addition, the Tokyo Hy-Power HL-1.5KFX gives you about 1k output on 160 through 10m, along with about 650w output on 6m - also with full integration with the K3 via the 15 pin ACC connector. 73, Bob Naumann W5OV Array Solutions -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Roger Sent: Monday, May 18, 2009 5:56 PM To: Elecraft Reflector Subject: [Elecraft] KPA-800 & KPA 1500 Elecraft, The only AMP that would interest me is something beyond and better than my Alpha 87A. That would be, by definition, a solid state 1500 watt output 160 to 6M amplifier integrated seamlessly with the K3 vie the 15 pin accessory plug. I would like to have the RF deck sitting at my operating position, assemble it myself and have the power supply out of sight. I would buy that amplifier the day it was announced. Roger K8RS K3 #280 and K3 #868, K2 #3478 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KPA-800 & KPA 1500
My elephant would look like my 2000A but solid-state - The amp in the basement and have a Remote Control Unit in the shack. Yes, 160-6M. Don't care if it is a kit or not. I assume a switching supply like the KPA1500. I agree about being seamless with the K3. 73, N2TK, Tony -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Roger Sent: Monday, May 18, 2009 6:56 PM To: Elecraft Reflector Subject: [Elecraft] KPA-800 & KPA 1500 Elecraft, The only AMP that would interest me is something beyond and better than my Alpha 87A. That would be, by definition, a solid state 1500 watt output 160 to 6M amplifier integrated seamlessly with the K3 vie the 15 pin accessory plug. I would like to have the RF deck sitting at my operating position, assemble it myself and have the power supply out of sight. I would buy that amplifier the day it was announced. Roger K8RS K3 #280 and K3 #868, K2 #3478 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KPA-800 & KPA 1500
Yeah, but some of us want 6M too. My 2000A does everything I want from 160-10M - remoted, 1500W on RTTY. But no instant ON. So, it is ON lots of times when I don't use it - like sunrise on Topband. I think THP did a great packaging job with the 2.5. If it only had 6M. And could be remoted. Trying to get the heat out of the shack. Maybe wishful thinking. But the amp fund has been sitting with money in it for a few years :-) N2TK, Tony -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Robert Naumann Sent: Monday, May 18, 2009 7:34 PM To: 'Roger'; 'Elecraft Reflector' Subject: Re: [Elecraft] KPA-800 & KPA 1500 With the exception of 6m, you have essentially that capability available in the Tokyo Hy-Power HL-2.5KFX which, thanks to Elecraft's loan of a new K3 for the show (thanks again Eric!), was being demonstrated in the Array Solutions booth this weekend in Dayton. In addition, the Tokyo Hy-Power HL-1.5KFX gives you about 1k output on 160 through 10m, along with about 650w output on 6m - also with full integration with the K3 via the 15 pin ACC connector. 73, Bob Naumann W5OV Array Solutions -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Roger Sent: Monday, May 18, 2009 5:56 PM To: Elecraft Reflector Subject: [Elecraft] KPA-800 & KPA 1500 Elecraft, The only AMP that would interest me is something beyond and better than my Alpha 87A. That would be, by definition, a solid state 1500 watt output 160 to 6M amplifier integrated seamlessly with the K3 vie the 15 pin accessory plug. I would like to have the RF deck sitting at my operating position, assemble it myself and have the power supply out of sight. I would buy that amplifier the day it was announced. Roger K8RS K3 #280 and K3 #868, K2 #3478 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KPA-800 & KPA 1500
I think a lot of us are essentially in the same situation: We already have a good legal-limit amp covering 160 through 10, but we don't have anything similar for 6 or 2. It takes real commitment to pay essentially the same amount over again and get just one more band, and building is a lot of work too. Any manufacturer who can include 6m along with HF has a huge advantage IMHO, and including 2m would be fantastic. QEX had a design some years ago that covered both 6 and 2; that really got me interested. Alpha was supposed to pick it up as part of their product line, but I don't know if it ever happened. I think there are plenty of areas in the market that haven't become commoditized. 73, Erik K7TV - Original Message - From: "N2TK" To: "'Elecraft Reflector'" Sent: Monday, May 18, 2009 4:52 PM Subject: Re: [Elecraft] KPA-800 & KPA 1500 > > Yeah, but some of us want 6M too. My 2000A does everything I want from > 160-10M - remoted, 1500W on RTTY. But no instant ON. So, it is ON lots of > times when I don't use it - like sunrise on Topband. > I think THP did a great packaging job with the 2.5. If it only had 6M. And > could be remoted. Trying to get the heat out of the shack. > > Maybe wishful thinking. But the amp fund has been sitting with money in it > for a few years :-) > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KPA-800 & KPA 1500
I have the 1.5FX, indeed an excellent companion to the K3, and the physical interface is made to measure. Bryan, Zl1NI > > > With the exception of 6m, you have essentially that capability > available in > the Tokyo Hy-Power HL-2.5KFX which, thanks to Elecraft's loan of a > new K3 > for the show (thanks again Eric!), was being demonstrated in the > Array > Solutions booth this weekend in Dayton. > > In addition, the Tokyo Hy-Power HL-1.5KFX gives you about 1k output > on 160 > through 10m, along with about 650w output on 6m - also with full > integration > with the K3 via the 15 pin ACC connector. > > 73, > > Bob Naumann W5OV > Array Solutions 08:29:00 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KPA-800 & KPA 1500
This is a great, healthy discussion that can help determine the need for an Elecraft branded amp. If we can't come up with a good set of features that are not met by current products, then perhaps it will be difficult to make the case there should be an Elecraft made amp. My dream product is a SO2R appliance that does all the RX/TX switching between 2 radios, including bandpass filters and remote antenna selection. 1500 W out, no time limit, RTTY included. Think of a 1500 W version of SPE, plus built-in W3NQN filters and Array Solution's SixPack. 2 inputs, 2 CATs, 2 PTTs, 6 or 10 remotely controlled outputs. Currently, there is not product that comes even close to such feature set. Rudy N2WQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KPA-800 & KPA 1500
How about adding a built in tuner in the KPA-800/1500 that would work even when you ran 100 watts from the K2 or K3 with the amp in standby? Frank - W4NHJ - Original Message - From: "Rudy Bakalov" To: "'Elecraft Reflector'" Sent: Monday, May 18, 2009 9:06 PM Subject: Re: [Elecraft] KPA-800 & KPA 1500 > > This is a great, healthy discussion that can help determine the need for > an Elecraft branded amp. If we can't come up with a good set of features > that are not met by current products, then perhaps it will be difficult to > make the case there should be an Elecraft made amp. > > My dream product is a SO2R appliance that does all the RX/TX switching > between 2 radios, including bandpass filters and remote antenna selection. > 1500 W out, no time limit, RTTY included. Think of a 1500 W version of > SPE, plus built-in W3NQN filters and Array Solution's SixPack. 2 inputs, > 2 CATs, 2 PTTs, 6 or 10 remotely controlled outputs. > > Currently, there is not product that comes even close to such feature set. > > Rudy N2WQ > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KPA-800 & KPA 1500
I ment to say auto tuner. Frank - Original Message - From: "Frank Ross W4NHJ" To: "'Elecraft Reflector'" Sent: Monday, May 18, 2009 9:40 PM Subject: Re: [Elecraft] KPA-800 & KPA 1500 > How about adding a built in tuner in the KPA-800/1500 that would work even > when you ran 100 watts from the K2 or K3 with the amp in standby? > > Frank - W4NHJ > > - Original Message - > From: "Rudy Bakalov" > To: "'Elecraft Reflector'" > Sent: Monday, May 18, 2009 9:06 PM > Subject: Re: [Elecraft] KPA-800 & KPA 1500 > > >> >> This is a great, healthy discussion that can help determine the need for >> an Elecraft branded amp. If we can't come up with a good set of features >> that are not met by current products, then perhaps it will be difficult >> to >> make the case there should be an Elecraft made amp. >> >> My dream product is a SO2R appliance that does all the RX/TX switching >> between 2 radios, including bandpass filters and remote antenna >> selection. >> 1500 W out, no time limit, RTTY included. Think of a 1500 W version of >> SPE, plus built-in W3NQN filters and Array Solution's SixPack. 2 inputs, >> 2 CATs, 2 PTTs, 6 or 10 remotely controlled outputs. >> >> Currently, there is not product that comes even close to such feature >> set. >> >> Rudy N2WQ >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KPA-800 & KPA 1500
Rudy, Just to clarify an apparent misunderstanding with the SPE amp, it is not a true SO2R device. What I mean is that the second radio can only listen to whatever antenna is attached to the "SO2R" connector. It does not get access to the transmit antennas which are connected to any of the 4 transmit antenna connections. So, while the SPE seems to be a great solution, it is a compromise at best, although quite clever. You also may want to check with K6VVA regarding its usefulness and viability in a contest situation. 73, Bob W5OV -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Rudy Bakalov Sent: Monday, May 18, 2009 8:07 PM To: 'Elecraft Reflector' Subject: Re: [Elecraft] KPA-800 & KPA 1500 This is a great, healthy discussion that can help determine the need for an Elecraft branded amp. If we can't come up with a good set of features that are not met by current products, then perhaps it will be difficult to make the case there should be an Elecraft made amp. My dream product is a SO2R appliance that does all the RX/TX switching between 2 radios, including bandpass filters and remote antenna selection. 1500 W out, no time limit, RTTY included. Think of a 1500 W version of SPE, plus built-in W3NQN filters and Array Solution's SixPack. 2 inputs, 2 CATs, 2 PTTs, 6 or 10 remotely controlled outputs. Currently, there is not product that comes even close to such feature set. Rudy N2WQ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KPA-800 & KPA 1500
Buy one of these.http://www.dishtronix.com/prometheus.html If I win the lottery it will be the amp of choice in the radio station on my privately owned island :-) Grant/NQ5T On May 18, 2009, at 5:56 PM, Roger wrote: > That would be, by definition, a solid state 1500 watt output 160 to > 6M amplifier integrated seamlessly with the K3 vie the 15 pin > accessory plug. I would like to have the RF deck sitting at my > operating position, assemble it myself and have the power supply out > of sight. I would buy that amplifier the day it was announced. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KPA-800 & KPA 1500
Bob, I think we are on the same page here; I fully understand the SPE limitations and that's why I say there is no product that fits my dream. I also missed to mention that such SO2R appliance must have the smarts of the microHam products in order the 2x6 matrix to have flexibility in a wide range of environments. So now I would add to the list the functionality of microHam's station master. --- On Mon, 5/18/09, Robert Naumann wrote: > From: Robert Naumann > Subject: RE: [Elecraft] KPA-800 & KPA 1500 > To: "'Rudy Bakalov'" , "'Elecraft Reflector'" > > Date: Monday, May 18, 2009, 9:58 PM > Rudy, > > Just to clarify an apparent misunderstanding with the SPE > amp, it is not a > true SO2R device. What I mean is that the second radio can > only listen to > whatever antenna is attached to the "SO2R" connector. It > does not get access > to the transmit antennas which are connected to any of the > 4 transmit > antenna connections. So, while the SPE seems to be a great > solution, it is a > compromise at best, although quite clever. You also may > want to check with > K6VVA regarding its usefulness and viability in a contest > situation. > > 73, > > Bob W5OV > > -Original Message- > From: elecraft-boun...@mailman.qth.net > [mailto:elecraft-boun...@mailman.qth.net] > On Behalf Of Rudy Bakalov > Sent: Monday, May 18, 2009 8:07 PM > To: 'Elecraft Reflector' > Subject: Re: [Elecraft] KPA-800 & KPA 1500 > > > This is a great, healthy discussion that can help determine > the need for an > Elecraft branded amp. If we can't come up with a good set > of features that > are not met by current products, then perhaps it will be > difficult to make > the case there should be an Elecraft made amp. > > My dream product is a SO2R appliance that does all the > RX/TX switching > between 2 radios, including bandpass filters and remote > antenna selection. > 1500 W out, no time limit, RTTY included. Think of a > 1500 W version of SPE, > plus built-in W3NQN filters and Array Solution's > SixPack. 2 inputs, 2 CATs, > 2 PTTs, 6 or 10 remotely controlled outputs. > > Currently, there is not product that comes even close to > such feature set. > > Rudy N2WQ > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:elecr...@mailman.qth..net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KPA-800 & KPA 1500
That is exactly what is done in SPE 1K-FA amp plus SO2R and automatic antenna selection. The integration with my K3 is pretty simple too. SPE is working on 1500W version now and hope to show it at the end of this year or beginning the next year. 6m is also built in. 73, Igor UA9CDC > How about adding a built in tuner in the KPA-800/1500 that would work even > when you ran 100 watts from the K2 or K3 with the amp in standby? > > Frank - W4NHJ > > - Original Message - > From: "Rudy Bakalov" > To: "'Elecraft Reflector'" > Sent: Monday, May 18, 2009 9:06 PM > Subject: Re: [Elecraft] KPA-800 & KPA 1500 > > >> >> This is a great, healthy discussion that can help determine the need for >> an Elecraft branded amp. If we can't come up with a good set of features >> that are not met by current products, then perhaps it will be difficult >> to >> make the case there should be an Elecraft made amp. >> >> My dream product is a SO2R appliance that does all the RX/TX switching >> between 2 radios, including bandpass filters and remote antenna >> selection. >> 1500 W out, no time limit, RTTY included. Think of a 1500 W version of >> SPE, plus built-in W3NQN filters and Array Solution's SixPack. 2 inputs, >> 2 CATs, 2 PTTs, 6 or 10 remotely controlled outputs. >> >> Currently, there is not product that comes even close to such feature >> set. >> >> Rudy N2WQ >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html