Re: [Elecraft] KX3 PX3 desktop stand
On 8/10/2020 9:00 AM, Jim H via Elecraft wrote: Hi,I'd like to add the PAE power supply. Small, noise free.73 This PSU IS quiet when supplying the 150mA or so needed on receive, but pretty noisy with the much larger currents needed for transmit. That means it's fine if it only powers a KX3 and you're not trying to listen on another radio at the same time. 73, Jim K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 PX3 desktop stand
Nice install. I took the GEM mounts and plywood one more step. I used a ~12" round 3/4" plywood disk and mounted three RAM mounts; https://www.rammount.com/ . KX3, PX3 and Plastic "box". The box can hold audio ADC and CAT control or for picnic table OP's, and antenna. I am able to adjust KX3/PX3 angle and position for best OP... 73, steve WB3LGC On 8/9/20 7:56 PM, Mark Goldberg wrote: Gem's Products KX3 and PX3 mounts and some plywood works for me. See the bottom of this page: https://sites.google.com/site/marksmobilehamstation/ 73, Mark W7MLG On Sun, Aug 9, 2020 at 1:18 PM Ron Bell via Elecraft wrote: Any recommendation for a desktop stand for a KX3 and PX3 that would keep both at proper angle and manage the wires? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to marklgoldb...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to sm.shearer...@gmail.com . __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 PX3 desktop stand
Hi,I'd like to add the PAE power supply. Small, noise free.73 Jim H k7sss In a message dated 8/10/2020 6:57:14 AM Pacific Standard Time, gio.fl...@gmail.com writes: GiRls, You might also consider a power-splutter cable from ProAudio Engineering. 73, John K4ARQ On Sun, Aug 9, 2020, 16:19 Ron Bell via Elecraft wrote: > Any recommendation for a desktop stand for a KX3 and PX3 that would keep > both at proper angle and manage the wires? > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to gio.fl...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k7...@aol.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 PX3 desktop stand
Check out M0TDZ's 3D printing KX3/PX3 stand customized with your call. http://chopcat.co.uk/blog-2/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 PX3 desktop stand
GiRls, You might also consider a power-splutter cable from ProAudio Engineering. 73, John K4ARQ On Sun, Aug 9, 2020, 16:19 Ron Bell via Elecraft wrote: > Any recommendation for a desktop stand for a KX3 and PX3 that would keep > both at proper angle and manage the wires? > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to gio.fl...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 PX3 desktop stand
Checkout www.nogaqrp.org. Clark, WU4B On Sun, Aug 9, 2020 at 7:58 PM Mark Goldberg wrote: > Gem's Products KX3 and PX3 mounts and some plywood works for me. See > the bottom of this page: > > https://sites.google.com/site/marksmobilehamstation/ > > 73, > > Mark > W7MLG > > On Sun, Aug 9, 2020 at 1:18 PM Ron Bell via Elecraft > wrote: > > > > Any recommendation for a desktop stand for a KX3 and PX3 that would keep > > both at proper angle and manage the wires? > > > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to marklgoldb...@gmail.com > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to clark.macau...@gmail.com > -- Sent from Gmail Mobile __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 PX3 desktop stand
I second the NoGaQrp stand. On Sun, Aug 9, 2020 at 20:13 Jim H via Elecraft wrote: > Hi,Try No Georgia Qrp club. www.nogaqrp.org. Nice stand to stack a KX3 > and a PX3.73JIm H k7sss In a message dated 8/9/2020 1:20:13 PM Pacific > Standard Time, elecraft@mailman.qth.net writes: > Any recommendation for a desktop stand for a KX3 and PX3 that would > keepboth at proper angle and manage the > wires? __Elecraft > mailing listHome: http://mailman.qth.net/mailman/listinfo/elecraftHelp: > http://mailman.qth.net/mmfaq.htmPost: mailto:Elecraft@mailman.qth.net This > list hosted by: http://www.qsl.netPlease help support this email list: > http://www.qsl.net/donate.htmlMessage delivered to k7...@aol.com > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to r...@wc3t.us -- 72, Rich Hurd / WC3T / DMR: 3142737 Northampton County RACES, EPA-ARRL Public Information Officer for Scouting Latitude: 40.761621 Longitude: -75.288988 (40°45.68' N 75°17.33' W) Grid: *FN20is* __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 PX3 desktop stand
Here is one I built using generally available parts. It’s buried but obvious in this blog post of mine. https://nomadic.blog/2020/05/08/of-cannons-beer-and-paradise/ Paul > On Aug 9, 2020, at 4:59 PM, Mark Goldberg wrote: > > Gem's Products KX3 and PX3 mounts and some plywood works for me. See > the bottom of this page: > > https://sites.google.com/site/marksmobilehamstation/ > > 73, > > Mark > W7MLG > >> On Sun, Aug 9, 2020 at 1:18 PM Ron Bell via Elecraft >> wrote: >> >> Any recommendation for a desktop stand for a KX3 and PX3 that would keep >> both at proper angle and manage the wires? >> >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to marklgoldb...@gmail.com > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to w6...@yahoo.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 PX3 desktop stand
Hi,Try No Georgia Qrp club. www.nogaqrp.org. Nice stand to stack a KX3 and a PX3.73JIm H k7sss In a message dated 8/9/2020 1:20:13 PM Pacific Standard Time, elecraft@mailman.qth.net writes: Any recommendation for a desktop stand for a KX3 and PX3 that would keepboth at proper angle and manage the wires? __Elecraft mailing listHome: http://mailman.qth.net/mailman/listinfo/elecraftHelp: http://mailman.qth.net/mmfaq.htmPost: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.netPlease help support this email list: http://www.qsl.net/donate.htmlMessage delivered to k7...@aol.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 PX3 desktop stand
Gem's Products KX3 and PX3 mounts and some plywood works for me. See the bottom of this page: https://sites.google.com/site/marksmobilehamstation/ 73, Mark W7MLG On Sun, Aug 9, 2020 at 1:18 PM Ron Bell via Elecraft wrote: > > Any recommendation for a desktop stand for a KX3 and PX3 that would keep > both at proper angle and manage the wires? > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to marklgoldb...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
