Re: [Elecraft] KXPD3 problems - Solved
The two pins in KX3 that mate with KXPD3 were recessed a few mm. After pulling back, the key works fine. I must have inserted KXPD3 too hard, and the pins gave out. I wonder how to secure the pins from recessing. Crazy glue, epoxy, or something else. Ignacy, NO9E -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KXPD3 problems
The problem with KX3 in TX when KXPD3 is fully inserted started just 2 weeks ago. Perhaps one air travel with rough treatment too many. Before everything was fine. If I put a blade of a small pocket knife between KX3 and KXPD3, the key works OK. Ignacy, NO9E -- Sent from: http://elecraft.365791.n2.nabble.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KXPD3 problems
Is the paddle port set to "Hand key"? Sent from my iPhone ...nr4c. bill > On Sep 9, 2017, at 4:04 PM, Don Butler <n...@comcast.net> wrote: > > I think he may be saying that when the KXPD3 is fully inserted the rig goes > into transmit but it works properly when it is pulled out a little ... > > -Original Message- > From: elecraft-boun...@mailman.qth.net > [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm > Sent: Saturday, September 09, 2017 1:34 PM > To: Ignacy; elecraft@mailman.qth.net > Subject: Re: [Elecraft] KXPD3 problems > > Ignacy, > > I have no idea why you would want to operate it when not fully inserted and > the securing screws tightened. > It does not sound to me as though you have a problem. > > 73, > Don W3FPR > >> On 9/9/2017 3:02 PM, Ignacy wrote: >> KXPD3 worked well until last week (ES/NO9E). Now as Z3/NO9E, KXPD3 >> sends when fully inserted. When partially inserted, it works OK. It >> seems that the bottom pins in KX3 are a bit lower and the top ones are >> a bit recessed. But perhaps it was always that way. > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html Message > delivered to n...@comcast.net > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@widomaker.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KXPD3 problems
If that is what was being stated, I did not understand "sends" equals "the paddles send OK". If the KX2 is going into full transmit, there is a problem, contact support for assistance. 73, Don W3FPR On 9/9/2017 4:04 PM, Don Butler wrote: I think he may be saying that when the KXPD3 is fully inserted the rig goes into transmit but it works properly when it is pulled out a little ... -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm Sent: Saturday, September 09, 2017 1:34 PM To: Ignacy; elecraft@mailman.qth.net Subject: Re: [Elecraft] KXPD3 problems Ignacy, I have no idea why you would want to operate it when not fully inserted and the securing screws tightened. It does not sound to me as though you have a problem. 73, Don W3FPR On 9/9/2017 3:02 PM, Ignacy wrote: KXPD3 worked well until last week (ES/NO9E). Now as Z3/NO9E, KXPD3 sends when fully inserted. When partially inserted, it works OK. It seems that the bottom pins in KX3 are a bit lower and the top ones are a bit recessed. But perhaps it was always that way. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to n...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KXPD3 problems
I think he may be saying that when the KXPD3 is fully inserted the rig goes into transmit but it works properly when it is pulled out a little ... -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Don Wilhelm Sent: Saturday, September 09, 2017 1:34 PM To: Ignacy; elecraft@mailman.qth.net Subject: Re: [Elecraft] KXPD3 problems Ignacy, I have no idea why you would want to operate it when not fully inserted and the securing screws tightened. It does not sound to me as though you have a problem. 73, Don W3FPR On 9/9/2017 3:02 PM, Ignacy wrote: > KXPD3 worked well until last week (ES/NO9E). Now as Z3/NO9E, KXPD3 > sends when fully inserted. When partially inserted, it works OK. It > seems that the bottom pins in KX3 are a bit lower and the top ones are > a bit recessed. But perhaps it was always that way. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to n...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KXPD3 problems
Ignacy, I have no idea why you would want to operate it when not fully inserted and the securing screws tightened. It does not sound to me as though you have a problem. 73, Don W3FPR On 9/9/2017 3:02 PM, Ignacy wrote: KXPD3 worked well until last week (ES/NO9E). Now as Z3/NO9E, KXPD3 sends when fully inserted. When partially inserted, it works OK. It seems that the bottom pins in KX3 are a bit lower and the top ones are a bit recessed. But perhaps it was always that way. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com