RE: [Elecraft] Questio when using a Heil Proset
Hi Ross, Looks like you have to switch OFF the bias. Use Main Menu item MIC SEL to do that If the MH2 works OK that means Bias is ON now. For the Heil ProSet (with #4 or #5 dyn. element) you might need the HI range mic gain (you can set that in the same menu). See p.51 of the Owner's Manual (rev.D). -- Enno, PF5X K3 #1263 I have just received my K3 and have been using it on data, and it is working well, But I have a problem, when trying to use the Heil Proset it receives ok but when I try to use the PTT I get a loud audio noise over the top of my speech, it sounds like someone giving a loud raspberry. Trying the MH2 hand mic everything works perfectly, there is no noise and using the monitor, my speech sounds normal. The problem with the Proset also occurs if I try and turn on the K3 manually. Ideas please, what have I set up incorrectly, or is it the headset? Regards to all Ross ZL1WN mail2web.com – Enhanced email for the mobile individual based on Microsoft® Exchange - http://link.mail2web.com/Personal/EnhancedEmail ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Questio when using a Heil Proset
Ross, If the bias turns out to be your problem, know that you can run the Heil Proset from the rear panel jacks and the MH2 from the Front Panel mic jack. The bias settings for the two mic inputs can be different. Just decide which mic you want to use and select that one in the menu - it is quick and easy. 73, Don W3FPR [EMAIL PROTECTED] wrote: Hi Ross, Looks like you have to switch OFF the bias. Use Main Menu item MIC SEL to do that If the MH2 works OK that means Bias is ON now. For the Heil ProSet (with #4 or #5 dyn. element) you might need the HI range mic gain (you can set that in the same menu). See p.51 of the Owner's Manual (rev.D). -- Enno, PF5X K3 #1263 I have just received my K3 and have been using it on data, and it is working well, But I have a problem, when trying to use the Heil Proset it receives ok but when I try to use the PTT I get a loud audio noise over the top of my speech, it sounds like someone giving a loud raspberry. Trying the MH2 hand mic everything works perfectly, there is no noise and using the monitor, my speech sounds normal. The problem with the Proset also occurs if I try and turn on the K3 manually. Ideas please, what have I set up incorrectly, or is it the headset? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Questio when using a Heil Proset
Ross: I am having the same results with a Warren Gregoire TR200 head set with boom mic. (electret element) The MH2 works just fine. I am feeding an end fed wire directley from the K3. I guessed that RF feedback was the problem. I plan to have a balanced antenna fed with ladder line up soon. I hope that the TR200 will work ok then. The TR200, used as a headset only sounds great. I am 80% CW and use the head set most of the time for CW and sometimes on phone, with very good results. The antenna is 150' of insulated wire laid on the grass, sort of works ok on 80, 60, 40. Have to move it to mow the grass. 73, Ty, W1TF, K3#696 --- On Wed, 8/20/08, Ross [EMAIL PROTECTED] wrote: From: Ross [EMAIL PROTECTED] Subject: [Elecraft] Questio when using a Heil Proset To: elecraft@mailman.qth.net Date: Wednesday, August 20, 2008, 1:51 AM I have just received my K3 and have been using it on data, and it is working well, But I have a problem, when trying to use the Heil Proset it receives ok but when I try to use the PTT I get a loud audio noise over the top of my speech, it sounds like someone giving a loud raspberry. Trying the MH2 hand mic everything works perfectly, there is no noise and using the monitor, my speech sounds normal. The problem with the Proset also occurs if I try and turn on the K3 manually. Ideas please, what have I set up incorrectly, or is it the headset? Regards to all Ross ZL1WN ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com