CSA labeling requirements to EN61010-1 (deviation)
Hello Group, Does anyone know if the date of manufacturing is required to be in the label of the equipment? I remember having seen this before but I don't know if this is still the case. Asking a colleage, he said that it is not neccesary? Any feedback is appriciated. Thank you in advance, Regards, Jorge Sarellano TUV PRODUCT SERVICE Compliance Engineer Phone 408-919-3744 Fax 408-919-0585 Have you visited http://www.tuvam.com
RE: Exports to Chili
Hello to all, Here is the attachment as stated in my previous email. If for some reason you are not able to receive it, let me know and I will email it directly. thanks, Jorge -Original Message- From: Rich Nute [mailto:ri...@sdd.hp.com] Sent: Wednesday, January 09, 2002 11:21 AM To: jsarell...@tuvam.com Cc: jim.bac...@paxar.com; pstc_ad...@garretson.org; dave_he...@hotmail.com Subject: Re: Exports to Chili Hi Jorge: > I have this fact sheet that was distributed by our International Compliance > Team. May be this will get you started. > please see the attachment. The fact sheet was not attached to the message that was posted to the emc-pstc mail list. This may be due to either of two problems: 1) You inadvertantly did not attach the fact sheet, or 2) The fact sheet exceeded 100k, and was stripped off by majordomo. (We have a rule against attachments exceeding 100 k). If 2), I would suggest you post another message offering to send the fact sheet upon request. Or make it available for downloading (ftp) from a web site. Or equivalent. By the way, please send a copy of the fact sheet to me! Thanks, and best regards, Rich Richard Nute Administrator, emc-pstc listserver c/o Hewlett-Packard Company San Diego CHILE-~1.HTM Description: Binary data
RE: Exports to Chili
Hello Andrew, I have this fact sheet that was distributed by our International Compliance Team. May be this will get you started. please see the attachment. Regards, Jorge Sarellano Compliance Engineer TUV PRODUCT SERVICE Santa Clara, CA Phone 408-919-3744 Fax 408-919-0585 -Original Message- From: acar...@uk.xyratex.com [mailto:acar...@uk.xyratex.com] Sent: Wednesday, January 09, 2002 6:12 AM To: emc Subject: Exports to Chili All Does anyone out three know with the Safety and EMC requirements are to import and sell IT products in Chili. Item in question is a mains powered RAID box currently approved to UL60950, EN60950 and IEC60950, with accompanying CB report. Currently I have drawn a big zero on finding any information so anything will be helpful. -- Andrew Carson - Senior Compliance Engineer, Xyratex, UK Phone: +44 (0)23 9249 6855 Fax: +44 (0)23 9249 6014 --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson:pstc_ad...@garretson.org Dave Healddavehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
RE: Define Continuous DC Voltage
I believe it is 2000-2700V and about 7-10A the value has increased from 1700V and 6A because some prisoners did not die. Regards, Jorge Sarellano TUV PRODUCT SERVICE Compliance Engineer Phone 408-919-3744 Fax 408-919-0585 Have you visited http://www.tuvam.com lately? -Original Message- From: dan.kin...@heapg.com [mailto:dan.kin...@heapg.com] Sent: Tuesday, November 13, 2001 1:56 PM To: Rich Nute; gkerv...@eu-link.com Cc: jrbar...@lexmark.com; emc-p...@majordomo.ieee.org Subject: RE: Define Continuous DC Voltage Does anyone know what voltage is used in electric chairs? Just Curious. Dan Kinney Horner APG Indianapolis > -Original Message- > From: Rich Nute [SMTP:ri...@sdd.hp.com] > Sent: Tuesday, November 13, 2001 2:08 PM > To: gkerv...@eu-link.com > Cc: jrbar...@lexmark.com; emc-p...@majordomo.ieee.org > Subject: Re: Define Continuous DC Voltage > > > > > > Hi Gregg: > > > > There was also a very good (but short) article by Tektronix in the > 70's > > called The Lethal Current. > > > > It concluded that currents between 100 mA and 3 Amps were more lethal > that > > currents of more than 3 Amps because those high currents tended to > 'restart' > > the heart. > > Hmm. Having been the manager of product safety at Tektronix in > the '70's, I don't recall such an article. At least not by that > name. > > Electric energy causes various injuries to the body depending > on the magnitude of the energy. Only two of the injuries can > lead to a fatality. > > The two injuries are fibrillation of the heart, and overheating > of internal organs, especially the liver. > > Fibrillation is caused by ac current in the range of 50 mA to > 500 mA (external connections) where the current pathway through > the body includes the chest (and the heart). Above 500 mA, > fibrillation is not a likely consequence. (And, I believe I > am correct in asserting that dc cannot cause fibrillation.) > > Overheating of internal organs is a function of power dissipated > in the body, where the body impedance can be taken as 1000 ohms. > The power required depends on the time of contact. Electric > utility linemen are subject to such injury. Consider 1 ampere > through 1000 ohms is 1000 watts! (The electric chair kills by > over-heating the internal organs, not by fibrillation.) > > So, Gregg's statement that there is both a lower and upper limit > for fibrillation is correct (although I do not agree with Gregg's > values). > > > Best regards, > Rich > > > > > > > --- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > majord...@ieee.org > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Michael Garretson:pstc_ad...@garretson.org > Dave Healddavehe...@mediaone.net > > For policy questions, send mail to: > Richard Nute: ri...@ieee.org > Jim Bacher: j.bac...@ieee.org > > All emc-pstc postings are archived and searchable on the web at: > No longer online until our new server is brought online and the old > messages are imported into the new server. --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson:pstc_ad...@garretson.org Dave Healddavehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
RE: Allowable Sound Pressure/Power Levels
Hello Ron, I know that UL 3101-1 and EN 61010-1 there are requiments for sound and power pressure, in UL 3101-1 --for sound pressure level of 85kBA above a reference sound pressure of 20uPa as the limit. Regards, Jorge Sarellano TUV Product Service Have you visited TUV PS lately? http://www.tuvgloval.com -Original Message- From: rpick...@hypercom.com [mailto:rpick...@hypercom.com] Sent: Friday, September 28, 2001 11:48 AM To: emc-p...@ieee.org Subject: Allowable Sound Pressure/Power Levels To all, I have been looking into sound pressure/power level requirements emanating from equipment such as ITE and any regulatory limits pertaining to them. Such requirements exist in the NEBS environment (section 4.6 of GR-63). There are other requirement relating to earpieces, such as IEC/EN60950 clause 6.4.3. Are there any other government/industry guidelines/requirements pertaining to equipment sound levels that relate to the general commercial environment? I know this may be somewhat of a broad question, but I'd like to know the requirements/guidelines that are out there, both here in the US and also internationally. Any assistance in identifying these requirements/guidelines would be greatly appreciated. Best regards, Ron Pickard rpick...@hypercom.com --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson:pstc_ad...@garretson.org Dave Healddavehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.