RE: Acousic Noise from ITE
Thanks for that update. I forgot to mention that the agency said that EN 27779 (ISO 7779) is the appropriate measurement standard. Richard Woods Sensormatic Electronics Tyco International -Original Message- From: Luttrell, Lyle [mailto:lluttr...@peakstor.com] Sent: Wednesday, September 18, 2002 12:12 PM To: 'richwo...@tycoint.com'; emc-p...@majordomo.ieee.org Subject: RE: Acousic Noise from ITE There is a voluntary standard that has been developed in Sweden by Statskontoret. The standard is based on the measurement methods of ISO7779. The latest version of this standard was issued early this year - link is http://www.statskontoret.se/projekt/standardisering/TN26.pdf Lyle Luttrell, PE PeAk Storage Solutions, a Division of MaxOptix 246 South Taylor Avenue Louisville, CO 80027 -Original Message- From: richwo...@tycoint.com [mailto:richwo...@tycoint.com] Sent: Wednesday, September 18, 2002 6:26 AM To: emc-p...@majordomo.ieee.org Subject: RE: Acousic Noise from ITE According to a well known German safety agency, there are no normative EU or German national acoustic limits for ITE. The 3rd GS Ordinance on product safety includes the requirements of the LVD and Machinery Directive, but the requirement for acoustic noise is understood to apply only to machinery. Even then, the requirment is to document the level in the manual, and no maximum levels are specified. There are German ocupational regulations that apply to the workplace environment, but those limits are for the work locations where the noise can originate at many sources. Does anyone else any input on ITE? Richard Woods Sensormatic Electronics Tyco International --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list
RE: Acousic Noise from ITE
There is a voluntary standard that has been developed in Sweden by Statskontoret. The standard is based on the measurement methods of ISO7779. The latest version of this standard was issued early this year - link is http://www.statskontoret.se/projekt/standardisering/TN26.pdf Lyle Luttrell, PE PeAk Storage Solutions, a Division of MaxOptix 246 South Taylor Avenue Louisville, CO 80027 -Original Message- From: richwo...@tycoint.com [mailto:richwo...@tycoint.com] Sent: Wednesday, September 18, 2002 6:26 AM To: emc-p...@majordomo.ieee.org Subject: RE: Acousic Noise from ITE According to a well known German safety agency, there are no normative EU or German national acoustic limits for ITE. The 3rd GS Ordinance on product safety includes the requirements of the LVD and Machinery Directive, but the requirement for acoustic noise is understood to apply only to machinery. Even then, the requirment is to document the level in the manual, and no maximum levels are specified. There are German ocupational regulations that apply to the workplace environment, but those limits are for the work locations where the noise can originate at many sources. Does anyone else any input on ITE? Richard Woods Sensormatic Electronics Tyco International --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list
RE: Acousic Noise from ITE
According to a well known German safety agency, there are no normative EU or German national acoustic limits for ITE. The 3rd GS Ordinance on product safety includes the requirements of the LVD and Machinery Directive, but the requirement for acoustic noise is understood to apply only to machinery. Even then, the requirment is to document the level in the manual, and no maximum levels are specified. There are German ocupational regulations that apply to the workplace environment, but those limits are for the work locations where the noise can originate at many sources. Does anyone else any input on ITE? Richard Woods Sensormatic Electronics Tyco International --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list
RE: Acousic Noise from ITE
ETSI 300 019-1-3 AND Telcordia NEBS GR-63-CORE are standards that I've had to deal with. ETSI's requirements are considerably more stringent, and are quoted in bels which is a sound power (normalized to 1m^2) independent of distance. GR-63 measures sound pressure at a specified distance (0.6m from face and 1.5m height). This must be converted to sound power. Additionally, there's a 3dB factor that must be included in the calculation to account for statistical variations in manufacture. I know of some co-relation factors and a rule of thumb between measurements called for in the two standards. Paul Dobrovolny Dobro Technical Services (613) 828-7080 paul_dobrovo...@sympatico.ca -Original Message- From: owner-emc-p...@majordomo.ieee.org [mailto:owner-emc-p...@majordomo.ieee.org]On Behalf Of Naftali Shani Sent: Tuesday, September 17, 2002 8:36 AM To: 'richwo...@tycoint.com' Cc: 'emc-p...@majordomo.ieee.org' Subject: RE: Acousic Noise from ITE Found in my dusty folder of seldom-used standards: ETS 300 753: October 1997 (Equipment Engineering; Acoustic noise emitted by telecommunication equipment) Is references: 1. ISO 7779 2. ISO 9296 3. ETS 300 019-1 (1994) 4. EEC directive 86/188/EEC 5. ETR 116 (1994) 6. ECMA TR/27 Call me if you need more information. Regards, Naftali Shani, Catena Networks (www.catena.com) 307 Legget Drive, Ottawa, Ontario, Canada K2K 3C8 613.599.6430/866.2CATENA (X.8277); C 295.7042; F 599.0445 E-mail: nsh...@catena.com -Original Message- From: richwo...@tycoint.com [mailto:richwo...@tycoint.com] Sent: Monday, September 16, 2002 11:44 AM To: emc-p...@majordomo.ieee.org Subject:Acousic Noise from ITE Are there any EU or national (e.g. GS) normative requirements to comply with any of the following standards or any other acoustic standards for ITE? EN27779 Acoustic measurement of airborn noise emitted by computer and business equipment. EN29295 Acoustic measurement of high frequency noise emitted by computer and business equipment. ISO 9296 Acoustics declared noise emission values of emitted by computer and business equipment. Richard Woods Sensormatic Electronics Tyco International --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list
RE: Acousic Noise from ITE
Found in my dusty folder of seldom-used standards: ETS 300 753: October 1997 (Equipment Engineering; Acoustic noise emitted by telecommunication equipment) Is references: 1. ISO 7779 2. ISO 9296 3. ETS 300 019-1 (1994) 4. EEC directive 86/188/EEC 5. ETR 116 (1994) 6. ECMA TR/27 Call me if you need more information. Regards, Naftali Shani, Catena Networks (www.catena.com) 307 Legget Drive, Ottawa, Ontario, Canada K2K 3C8 613.599.6430/866.2CATENA (X.8277); C 295.7042; F 599.0445 E-mail: nsh...@catena.com -Original Message- From: richwo...@tycoint.com [mailto:richwo...@tycoint.com] Sent: Monday, September 16, 2002 11:44 AM To: emc-p...@majordomo.ieee.org Subject:Acousic Noise from ITE Are there any EU or national (e.g. GS) normative requirements to comply with any of the following standards or any other acoustic standards for ITE? EN27779 Acoustic measurement of airborn noise emitted by computer and business equipment. EN29295 Acoustic measurement of high frequency noise emitted by computer and business equipment. ISO 9296 Acoustics declared noise emission values of emitted by computer and business equipment. Richard Woods Sensormatic Electronics Tyco International --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list
RE: Acousic Noise from ITE
Rich, There us to be a series of specifications for noise equipment in office environments - not so much what type of equipment but more on the order of a quiet office environment equipment had to be 50 or 55 dBA, I forget which. Lots of nasty things to go along with all of that. Printers had impulse noise to contend with, etc. I don't know if they have, but the trend was to go from sound pressure measurements to sound power measurements. On the one had it made it easier for the manufacturer to make repeatable and accurate measurements, and you didn't need to have a sound anechoic chamber and make parallel piped measurements at various spots around the equipment. Been a while since I made those measurements, but Bruel and Kjaer had lost of papers on the issue. Gary -Original Message- From: Warren Birmingham [mailto:war...@comfortjets.com] Sent: Monday, September 16, 2002 1:26 PM To: richwo...@tycoint.com Cc: emc-p...@majordomo.ieee.org Subject: Re: Acousic Noise from ITE I went to the Global Engineering Website and http://www.global.ihs.com and found over 300 standards related to the keyword acoustic You can narrow the search. Warren Birmingham Epsilon-Mu Consultants On Monday, Sep 16, 2002, at 08:43 US/Pacific, richwo...@tycoint.com wrote: Are there any EU or national (e.g. GS) normative requirements to comply with any of the following standards or any other acoustic standards for ITE? EN27779 Acoustic measurement of airborn noise emitted by computer and business equipment. EN29295 Acoustic measurement of high frequency noise emitted by computer and business equipment. ISO 9296 Acoustics declared noise emission values of emitted by computer and business equipment. Richard Woods Sensormatic Electronics Tyco International --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list
Re: Acousic Noise from ITE
I went to the Global Engineering Website and http://www.global.ihs.com and found over 300 standards related to the keyword acoustic You can narrow the search. Warren Birmingham Epsilon-Mu Consultants On Monday, Sep 16, 2002, at 08:43 US/Pacific, richwo...@tycoint.com wrote: Are there any EU or national (e.g. GS) normative requirements to comply with any of the following standards or any other acoustic standards for ITE? EN27779 Acoustic measurement of airborn noise emitted by computer and business equipment. EN29295 Acoustic measurement of high frequency noise emitted by computer and business equipment. ISO 9296 Acoustics declared noise emission values of emitted by computer and business equipment. Richard Woods Sensormatic Electronics Tyco International --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list
RE: Acousic Noise from ITE
Richard, I would contact Steven Kraemer @ TUV Rheinland in the Toronto office. He is very knowledgeable in the area of Noise requirements in the EU. regards, John -Original Message- From: richwo...@tycoint.com [mailto:richwo...@tycoint.com] Sent: Monday, September 16, 2002 11:44 AM To: emc-p...@majordomo.ieee.org Subject: Acousic Noise from ITE Are there any EU or national (e.g. GS) normative requirements to comply with any of the following standards or any other acoustic standards for ITE? EN27779 Acoustic measurement of airborn noise emitted by computer and business equipment. EN29295 Acoustic measurement of high frequency noise emitted by computer and business equipment. ISO 9296 Acoustics declared noise emission values of emitted by computer and business equipment. Richard Woods Sensormatic Electronics Tyco International --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list
Acousic Noise from ITE
Are there any EU or national (e.g. GS) normative requirements to comply with any of the following standards or any other acoustic standards for ITE? EN27779 Acoustic measurement of airborn noise emitted by computer and business equipment. EN29295 Acoustic measurement of high frequency noise emitted by computer and business equipment. ISO 9296 Acoustics declared noise emission values of emitted by computer and business equipment. Richard Woods Sensormatic Electronics Tyco International --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list