Re: EN55024 - Burst / fast transient test
Amund, EN55024:1998 Table 2 2.3 for the EN16000-4-4 Electrical Fast Transient/Burst (EFTB) test refers to note 3, which says Applicable only to cables which according to the manufacturer's specification supports communication cable lengths greater than 3 m. Please note that EN55024:1998 replaces this table as one of the COMMON MODIFICATIONS to IEC CISPR 24:1997. John Barnes KS4GL, PE, NCE, ESDC Eng, SM IEEE dBi Corporation http://www.dbicorporation.com/ This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list
RE: EN55024 - Burst / fast transient test
Amund, CISPR24, Clause 4.2.2 Electrical fast transients - interface ports, which are intended by the mftr to be connected to data cables not longer than 3 meter, shall not be tested. Regards, Kris From: Amund Westin [mailto:am...@westin-emission.no] Sent: dinsdag 14 januari 2003 13:25 To: emc-p...@majordomo.ieee.org Subject: EN55024 - Burst / fast transient test Does Burst testing apply for I/O cables with length less than 3 meters according to EN55024? I recall that some EN standards have a statement that Burst in does not apply on I/O cables less than 3 meters. Yes, I will buy the standard so we can follow it in detail. Amund This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list
EN55024 - Burst / fast transient test
Does Burst testing apply for I/O cables with length less than 3 meters according to EN55024? I recall that some EN standards have a statement that Burst in does not apply on I/O cables less than 3 meters. Yes, I will buy the standard so we can follow it in detail. Amund This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list
