RE: FCC part 15 text (part 18 too?)
Is the same labeling applicabler to part 18 ? thanks in advance Moshe Name: moshe valdman E-mail: mvald...@netvision.net.il Phone: 972-52-941200 Telefax: 972-3-5496369 List-Post: emc-pstc@listserv.ieee.org Date: 12/4/99 Time: 22:35:17 You are most welcome to visit my homepage at: http://www.geocities.com/CapeCanaveral/5233/ - This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: unsubscribe emc-pstc (without the quotes). For help, send mail to ed.pr...@cubic.com, j...@gwmail.monarch.com, ri...@sdd.hp.com, or roger.volgst...@compaq.com (the list administrators).
RE: FCC part 15 text
Kim: the following is a cut and paste from the FCC rules found on the RCIC web site Sec. 15.19 Labelling requirements. (3) All other devices shall bear the following statement in a conspicuous location on the device: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. (5) When the device is so small or for such use that it is not practicable to place the statement specified under paragraph (a) of this section on it, the information required by this paragraph shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. However, the FCC identifier or the unique identifier, as appropriate, must be displayed on the device. Go to the RCIC web site for the complete text of CFR 47 Regulations and standards http://www.rcic.com/default.htm Jim -Original Message- From: kim.boll.jen...@i-data.com [SMTP:kim.boll.jen...@i-data.com] Sent: Monday, April 12, 1999 9:32 AM To: emc-p...@ieee.org Subject: FCC part 15 text Dear groupe, I have just started in a new job and are preparing label text for FCC class B ITE equipment for verification. I would use the §15.105 text in the manual and the following § 15.19 (3) text on the equipment: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. But the production leader say that UL have told them that the following text on the equipment is OK: This equipment complies with the requirements in Part 15 of FCC Rules. See manual Where have UL got this text from and is it OK to use this short version ? Best regards, Mr. Kim Boll Jensen i-data, Denmark - This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: unsubscribe emc-pstc (without the quotes). For help, send mail to ed.pr...@cubic.com, j...@gwmail.monarch.com, ri...@sdd.hp.com, or roger.volgst...@compaq.com (the list administrators). - This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: unsubscribe emc-pstc (without the quotes). For help, send mail to ed.pr...@cubic.com, j...@gwmail.monarch.com, ri...@sdd.hp.com, or roger.volgst...@compaq.com (the list administrators).
RE: FCC part 15 text
The following is taken from an FCC Guide to the new DoC procedure for Class B Certification. As you can see, the text of the Compliance Statement located on the exterior of the device depends on the size of the device, as described below: PRODUCT LABELING INFORMATION: If the device is extremely small, no FCC certification information need be placed on the unit, but both the FCC Compliance Statement and the FCC Warning Statement should be included in the Manual in a conspicuous location. If the device is moderately small, an abbreviated FCC Compliance statement should be placed on it's exterior, in no less than (8) point san serif type. Example: (not in correct type or font) THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. SEE INSTRUCTION MANUAL. If the product is larger, it should carry the full text of the FCC Compliance Statement, as follows, in the same minimum type face and size as the abbreviated message above. The overall size and shape of the notifi cation is not regulated. Example: (Not in correct type or font) THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION OF THIS DEVICE IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THE DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Regardless of which scenario your product fits into, keep in mind that you are still required to label the product with the FCC Self-Certification Logo and associated product number. If you are submitting an application for Certification using the older route (Form 731), the Certification Statement and FCC Warning Statement (Statement to the User in the Manual) remain the same as above, however, instead of labeling your product with the FCC Self-Certify Logo, the product will require the FCC Identifier to be placed on the exterior of the product. MANUAL INFORMATION: If the product carries no FCC Compliance Statement or the Abbreviated Compliance Statement, the full text of the Compliance Statement must be included in the manual as follows: FCC Compliance Statement: THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION OF THIS DEVICE IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THE DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Regardless of the form of the FCC Compliance Statement, all tested and approved Class B devices should have the FCC Warning Statement in the Manual as described in section 15.105(b) of FCC CFR 47 (October 1, 1998). I hope this helps. -- Sincerely, Randall T. Flinders EMC Engineer Emulex Network Systems V: (714) 513-8012 F: (714) 513-8265 randall.flind...@emulex.com __ __ __\ /__ __/ \__ E M U L E X -- From: kim.boll.jen...@i-data.com Sent: Monday, April 12, 1999 6:31 AM To: emc-p...@ieee.org Subject:FCC part 15 text Dear groupe, I have just started in a new job and are preparing label text for FCC class B ITE equipment for verification. I would use the ?15.105 text in the manual and the following ? 15.19 (3) text on the equipment: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. But the production leader say that UL have told them that the following text on the equipment is OK: This equipment complies with the requirements in Part 15 of FCC Rules. See manual Where have UL got this text from and is it OK to use this short version ? Best regards, Mr. Kim Boll Jensen i-data, Denmark - This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: unsubscribe emc-pstc (without the quotes). For help, send mail to ed.pr...@cubic.com, j...@gwmail.monarch.com, ri...@sdd.hp.com, or roger.volgst...@compaq.com (the list administrators). - This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: unsubscribe emc-pstc (without the quotes). For help, send mail to ed.pr...@cubic.com, j...@gwmail.monarch.com, ri...@sdd.hp.com, or roger.volgst...@compaq.com (the list administrators).
FCC part 15 text
Dear groupe, I have just started in a new job and are preparing label text for FCC class B ITE equipment for verification. I would use the §15.105 text in the manual and the following § 15.19 (3) text on the equipment: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. But the production leader say that UL have told them that the following text on the equipment is OK: This equipment complies with the requirements in Part 15 of FCC Rules. See manual Where have UL got this text from and is it OK to use this short version ? Best regards, Mr. Kim Boll Jensen i-data, Denmark - This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to majord...@ieee.org with the single line: unsubscribe emc-pstc (without the quotes). For help, send mail to ed.pr...@cubic.com, j...@gwmail.monarch.com, ri...@sdd.hp.com, or roger.volgst...@compaq.com (the list administrators).