Re: made in xxxx requirements?
Brent, I did some research on this subject a while back. The following web sites should be helpful: US International Trade Commission http://www.usitc.gov/sec/I0619S3.HTM The Trade Information Center http://www.ita.doc.gov/td/tic/ US Department of Commerce http://home.doc.gov Federal Trade Commission http://www.ftc.gov/os/1997/9712/epsmadeusa.htm http://www.ftc.gov/opp/jointvent/madeusa/factsht.htm US Customs Trade Office (202) 927-0300 If you would like more info, give me a call or email Regards Joe Martin Applied Biosystems (650) 638-5695 marti...@appliedbiosystems.com brent.dewitt@us.datex-o hmeda.com To: emc-p...@majordomo.ieee.org Sent by: cc: owner-emc-pstc@majordomSubject: made in requirements? o.ieee.org 07/18/2002 04:22 PM Please respond to brent.dewitt This is not my usual area of interest, but a question came up about regulations for country of origin marking, either in the US or EU. Can anyone point me in the direction of an answer? Thanks all, Brent DeWitt Datex-Ohmeda Louisville, CO --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list
RE: made in xxxx requirements?
Hi Brent, The following link lists the relationship between U.S. Customs and the FDA and the only FDA/U.S. Customs rule regarding labeling of country of origin. http://www.fda.gov/cdrh/manual/ireas.pdf Hope it helps. Best regards, Garry Hojan CEO/ President Strategic Compliance Services (SCS) a Division of NRL, L.L.C. 11402 E Mariposa Rd. Stockton, CA 95215 Tel:209-465-0619 Fax:209-812-1931 Mobile: 209-662-4322 Email: gho...@regulatory-compliance.com Web:www.regulatory-compliance.com -Original Message- From: owner-emc-p...@majordomo.ieee.org [mailto:owner-emc-p...@majordomo.ieee.org] On Behalf Of Brent DeWitt Sent: Thursday, July 18, 2002 6:24 PM To: Garry Hojan; brent.dew...@us.datex-ohmeda.com; emc-p...@majordomo.ieee.org Subject:RE: made in requirements? Gary, Sorry. It's Medical Electrical Equipment. Both the MDD and FDA have been searched with no apparent need for this marking, but this may not be correct. -Original Message- From: owner-emc-p...@majordomo.ieee.org [mailto:owner-emc-p...@majordomo.ieee.org]On Behalf Of Garry Hojan Sent: Thursday, July 18, 2002 6:47 PM To: brent.dew...@us.datex-ohmeda.com; emc-p...@majordomo.ieee.org Subject: RE: made in requirements? Hello Brent, Can you let us know the basic category of product? The marking requirements for Country of Origin vary depending on the product and of course, the country that the product is intended to be marketed in. There will be two areas that you might have to address this issue, first in the labeling requirements for an approval, and secondly in the pro forma invoice for customs and excise. Best regards, Garry Hojan CEO/ President Strategic Compliance Services (SCS) a Division of NRL, L.L.C. 11402 E Mariposa Rd. Stockton, CA 95215 Tel:209-465-0619 Fax:209-812-1931 Mobile: 209-662-4322 Email: gho...@regulatory-compliance.com Web:www.regulatory-compliance.com -Original Message- From: owner-emc-p...@majordomo.ieee.org [mailto:owner-emc-p...@majordomo.ieee.org] On Behalf Of brent.dew...@us.datex-ohmeda.com Sent: Thursday, July 18, 2002 4:22 PM To: emc-p...@majordomo.ieee.org Subject:made in requirements? This is not my usual area of interest, but a question came up about regulations for country of origin marking, either in the US or EU. Can anyone point me in the direction of an answer? Thanks all, Brent DeWitt Datex-Ohmeda Louisville, CO --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your
RE: made in xxxx requirements?
I am out of the office right now. But from memory the FDA country of origin requirments are covered right at the front of the regs. Something like section 1020, if you are familiar with the laser section which starts around 1040. Then at the beginning it refrences you back to the section which covers labeling requirments for all equipment that falls under the scope of the FDA . -Original Message- From: Brent DeWitt [mailto:bdew...@ix.netcom.com] Sent: Fri 19/07/2002 02:24 To: Garry Hojan; brent.dew...@us.datex-ohmeda.com; emc-p...@majordomo.ieee.org Cc: Subject: RE: made in requirements? Gary, Sorry. It's Medical Electrical Equipment. Both the MDD and FDA have been searched with no apparent need for this marking, but this may not be correct. -Original Message- From: owner-emc-p...@majordomo.ieee.org [mailto:owner-emc-p...@majordomo.ieee.org]On Behalf Of Garry Hojan Sent: Thursday, July 18, 2002 6:47 PM To: brent.dew...@us.datex-ohmeda.com; emc-p...@majordomo.ieee.org Subject: RE: made in requirements? Hello Brent, Can you let us know the basic category of product? The marking requirements for Country of Origin vary depending on the product and of course, the country that the product is intended to be marketed in. There will be two areas that you might have to address this issue, first in the labeling requirements for an approval, and secondly in the pro forma invoice for customs and excise. Best regards, Garry Hojan CEO/ President Strategic Compliance Services (SCS) a Division of NRL, L.L.C. 11402 E Mariposa Rd. Stockton, CA 95215 Tel:209-465-0619 Fax:209-812-1931 Mobile: 209-662-4322 Email: gho...@regulatory-compliance.com Web:www.regulatory-compliance.com -Original Message- From: owner-emc-p...@majordomo.ieee.org [mailto:owner-emc-p...@majordomo.ieee.org] On Behalf Of brent.dew...@us.datex-ohmeda.com Sent: Thursday, July 18, 2002 4:22 PM To: emc-p...@majordomo.ieee.org Subject:made in requirements? This is not my usual area of interest, but a question came up about regulations for country of origin marking, either in the US or EU. Can anyone point me in the direction of an answer? Thanks all, Brent DeWitt Datex-Ohmeda Louisville, CO --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc
RE: made in xxxx requirements?
Gary, Sorry. It's Medical Electrical Equipment. Both the MDD and FDA have been searched with no apparent need for this marking, but this may not be correct. -Original Message- From: owner-emc-p...@majordomo.ieee.org [mailto:owner-emc-p...@majordomo.ieee.org]On Behalf Of Garry Hojan Sent: Thursday, July 18, 2002 6:47 PM To: brent.dew...@us.datex-ohmeda.com; emc-p...@majordomo.ieee.org Subject: RE: made in requirements? Hello Brent, Can you let us know the basic category of product? The marking requirements for Country of Origin vary depending on the product and of course, the country that the product is intended to be marketed in. There will be two areas that you might have to address this issue, first in the labeling requirements for an approval, and secondly in the pro forma invoice for customs and excise. Best regards, Garry Hojan CEO/ President Strategic Compliance Services (SCS) a Division of NRL, L.L.C. 11402 E Mariposa Rd. Stockton, CA 95215 Tel:209-465-0619 Fax:209-812-1931 Mobile: 209-662-4322 Email: gho...@regulatory-compliance.com Web:www.regulatory-compliance.com -Original Message- From: owner-emc-p...@majordomo.ieee.org [mailto:owner-emc-p...@majordomo.ieee.org] On Behalf Of brent.dew...@us.datex-ohmeda.com Sent: Thursday, July 18, 2002 4:22 PM To: emc-p...@majordomo.ieee.org Subject:made in requirements? This is not my usual area of interest, but a question came up about regulations for country of origin marking, either in the US or EU. Can anyone point me in the direction of an answer? Thanks all, Brent DeWitt Datex-Ohmeda Louisville, CO --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list
RE: made in xxxx requirements?
Hello Brent, Can you let us know the basic category of product? The marking requirements for Country of Origin vary depending on the product and of course, the country that the product is intended to be marketed in. There will be two areas that you might have to address this issue, first in the labeling requirements for an approval, and secondly in the pro forma invoice for customs and excise. Best regards, Garry Hojan CEO/ President Strategic Compliance Services (SCS) a Division of NRL, L.L.C. 11402 E Mariposa Rd. Stockton, CA 95215 Tel:209-465-0619 Fax:209-812-1931 Mobile: 209-662-4322 Email: gho...@regulatory-compliance.com Web:www.regulatory-compliance.com -Original Message- From: owner-emc-p...@majordomo.ieee.org [mailto:owner-emc-p...@majordomo.ieee.org] On Behalf Of brent.dew...@us.datex-ohmeda.com Sent: Thursday, July 18, 2002 4:22 PM To: emc-p...@majordomo.ieee.org Subject:made in requirements? This is not my usual area of interest, but a question came up about regulations for country of origin marking, either in the US or EU. Can anyone point me in the direction of an answer? Thanks all, Brent DeWitt Datex-Ohmeda Louisville, CO --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list
RE: made in xxxx requirements?
Try this link for a start http://www.customs.ustreas.gov/imp-exp2/import/marking.htm Robert Sem Sr. Product Regulations Engineer Intel Corporation 5200 NE Elam Young Pkwy. MS JF#-410 Hillsboro, OR 97124 U.S. Phone (503) 264-4430 Fax (503) 264-0124 robert.k@intel.com -Original Message- From: brent.dew...@us.datex-ohmeda.com [mailto:brent.dew...@us.datex-ohmeda.com] Sent: Thursday, July 18, 2002 4:22 PM To: emc-p...@majordomo.ieee.org Subject: made in requirements? This is not my usual area of interest, but a question came up about regulations for country of origin marking, either in the US or EU. Can anyone point me in the direction of an answer? Thanks all, Brent DeWitt Datex-Ohmeda Louisville, CO --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list --- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on browse and then emc-pstc mailing list