Re: Do you need a license
Tim Haynes G-Net 701 3239 / 3455 wrote: My licence covers 9kHz to 100GHz and for pulse / FM / AM modulations. Presumably this is only a transmitter licence, not a receiver licence? -- Regards, Phil Ford phil_f...@uk.xyratex.com tel +44 (0)1705 443255fax +44 (0)1705 499315 Xyratex, Langstone Road, Havant, PO9 1SA, United Kingdom http://www.xyratex.com/
Re: Do you need a license
#Paul Rampelbergh wrote: # # Is there a need to have a license to posses and operate EMC # measurement tools? # #In the UK... none that I know of. #-- #Regards, #Phil Ford You might like to check the situation with the following person; Steve Hewitt of the Radiocommunications Agency, Test and Development Licence section Phone +44 (0) 171 211 0008 The situation may change depending on the frequency of radiation within the screened room - the breakpoint being 1GHz I think. I applied for a licence - and this was granted (for 150 UKP / annum) - I was NOT told that a licence was not needed. My licence covers 9kHz to 100GHz and for pulse / FM / AM modulations. If you do not use a screened room - then you Do need a licence! Regards Tim Haynes Regards Tim Haynes (tim.hay...@gecm.com) Disclaimer My mind is my own - blame no other for my thoughts. Num festinat tempus quando ludes
Re: Do you need a license
In a message dated 98-01-06 04:09:12 EST, phil_f...@uk.xyratex.com writes: Paul Rampelbergh wrote: Is there a need to have a license to posses and operate EMC measurement tools? In the UK... none that I know of. -- Regards, Phil Ford phil_f...@uk.xyratex.com tel +44 (0)1705 443255fax +44 (0)1705 499315 Xyratex, Langstone Road, Havant, PO9 1SA, United Kingdom http://www.xyratex.com/ Be careful here if you're doing in situ RF immunity tests, i.e., outside of an anechoic chamber or other Faraday cage. In the USA, at least, this can get you into frequencies and powers that technically require licenses. Mike Sherman FSI International miksher...@aol.com (612) 361-8140
Re: Do you need a license
Paul Rampelbergh wrote: Is there a need to have a license to posses and operate EMC measurement tools? In the UK... none that I know of. -- Regards, Phil Ford phil_f...@uk.xyratex.com tel +44 (0)1705 443255fax +44 (0)1705 499315 Xyratex, Langstone Road, Havant, PO9 1SA, United Kingdom http://www.xyratex.com/