Re: [Emc-users] G33.1 error then g-code file parsed
Without I3.00 make no difference. Then there is G33.1 in the file error message "parse_file interp_error" is shown and display is not updated. Looking more closely at the bottom G-code is however actually loaded and seems to execute correct including the G33.1 rigid tapping cycle even though there is error message and display not updated. Nicklas Karlsson Den 2023-06-14 kl. 21:36, skrev Sam Sokolik: Could you try it without I3.000? On Wed, Jun 14, 2023 at 2:31 PM John Dammeyer wrote: Does your spindle have an encoder and the spindle at speed? https://forum.linuxcnc.org/38-general-linuxcnc-questions/43124-g33-1-rigid-tapping -Original Message- From: Nicklas SB Karlsson [mailto:n...@nksb.eu] Sent: June 14, 2023 12:14 PM To: emc-users@lists.sourceforge.net Subject: [Emc-users] G33.1 error then g-code file parsed I put the lines below into a file: � M3 S100 � G33.1 Z-30.474 K0.8 I3.000 � M5 � M2 Then I read into Linuxcnc I get error message: � parse_file interp_error Removing the line with G33.1 then no error message so it is something with this row. Program do however execute as expected with G33.1 line even though there is an error message so no real problem. Also execute without an error message if run manually in MDI mode. Use origin/master last commit Mon May 8 16:10:03 2023 +0200 404aa407f136ce91a3e6bf911c7bda54011a74e9 Anybody else had similar problem? Nicklas Karlsson ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] OT makino knucklehead huge mass and fast
The video says 1200 kg. So about 2600 lbs. On 6/14/23 6:05 AM, Todd Zuercher wrote: Think that is a solid chunk of steel mounted on that? If so about what would it probably weigh? Todd Zuerc P. Graham Dunn Inc. 630 Henry Street Dalton, Ohio 44618 Phone: (330)828-2105ext. 2031 -Original Message- From: Thomas J Powderly Sent: Wednesday, June 14, 2023 5:39 AM To: emc-users@lists.sourceforge.net Subject: [Emc-users] OT makino knucklehead huge mass and fast [EXTERNAL EMAIL] Be sure links are safe. OT but certainly an achievement https://www.youtube.com/watch?v=4x1900_T4-M they must have had the concrete barbers in to anchor it down tomp ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Drew Rogge d...@dasrogges.com Phone: 8934OOO629OO4829631OOO ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] OT makino knucklehead huge mass and fast
Think that is a solid chunk of steel mounted on that? If so about what would it probably weigh? Todd Zuercher P. Graham Dunn Inc. 630 Henry Street Dalton, Ohio 44618 Phone: (330)828-2105ext. 2031 -Original Message- From: Thomas J Powderly Sent: Wednesday, June 14, 2023 5:39 AM To: emc-users@lists.sourceforge.net Subject: [Emc-users] OT makino knucklehead huge mass and fast [EXTERNAL EMAIL] Be sure links are safe. OT but certainly an achievement https://www.youtube.com/watch?v=4x1900_T4-M they must have had the concrete barbers in to anchor it down tomp ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] G33.1 error then g-code file parsed
Could you try it without I3.000? On Wed, Jun 14, 2023 at 2:31 PM John Dammeyer wrote: > Does your spindle have an encoder and the spindle at speed? > > > https://forum.linuxcnc.org/38-general-linuxcnc-questions/43124-g33-1-rigid-tapping > > > -Original Message- > From: Nicklas SB Karlsson [mailto:n...@nksb.eu] > Sent: June 14, 2023 12:14 PM > To: emc-users@lists.sourceforge.net > Subject: [Emc-users] G33.1 error then g-code file parsed > > I put the lines below into a file: > > � M3 S100 > � G33.1 Z-30.474 K0.8 I3.000 > � M5 > � M2 > > Then I read into Linuxcnc I get error message: > > � parse_file interp_error > > Removing the line with G33.1 then no error message so it is something > with this row. Program do however execute as expected with G33.1 line > even though there is an error message so no real problem. Also execute > without an error message if run manually in MDI mode. Use origin/master > last commit Mon May 8 16:10:03 2023 +0200 > 404aa407f136ce91a3e6bf911c7bda54011a74e9 Anybody else had similar problem? > > > Nicklas Karlsson > > > > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] G33.1 error then g-code file parsed
Does your spindle have an encoder and the spindle at speed? https://forum.linuxcnc.org/38-general-linuxcnc-questions/43124-g33-1-rigid-tapping -Original Message- From: Nicklas SB Karlsson [mailto:n...@nksb.eu] Sent: June 14, 2023 12:14 PM To: emc-users@lists.sourceforge.net Subject: [Emc-users] G33.1 error then g-code file parsed I put the lines below into a file: � M3 S100 � G33.1 Z-30.474 K0.8 I3.000 � M5 � M2 Then I read into Linuxcnc I get error message: � parse_file interp_error Removing the line with G33.1 then no error message so it is something with this row. Program do however execute as expected with G33.1 line even though there is an error message so no real problem. Also execute without an error message if run manually in MDI mode. Use origin/master last commit Mon May 8 16:10:03 2023 +0200 404aa407f136ce91a3e6bf911c7bda54011a74e9 Anybody else had similar problem? Nicklas Karlsson ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] G33.1 error then g-code file parsed
I put the lines below into a file: M3 S100 G33.1 Z-30.474 K0.8 I3.000 M5 M2 Then I read into Linuxcnc I get error message: parse_file interp_error Removing the line with G33.1 then no error message so it is something with this row. Program do however execute as expected with G33.1 line even though there is an error message so no real problem. Also execute without an error message if run manually in MDI mode. Use origin/master last commit Mon May 8 16:10:03 2023 +0200 404aa407f136ce91a3e6bf911c7bda54011a74e9 Anybody else had similar problem? Nicklas Karlsson ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] OT makino knucklehead huge mass and fast
OT but certainly an achievement https://www.youtube.com/watch?v=4x1900_T4-M they must have had the concrete barbers in to anchor it down tomp ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users