Does your spindle have an encoder and the spindle at speed? https://forum.linuxcnc.org/38-general-linuxcnc-questions/43124-g33-1-rigid-tapping
-----Original Message----- From: Nicklas SB Karlsson [mailto:n...@nksb.eu] Sent: June 14, 2023 12:14 PM To: emc-users@lists.sourceforge.net Subject: [Emc-users] G33.1 error then g-code file parsed I put the lines below into a file: � M3 S100 � G33.1 Z-30.474 K0.8 I3.000 � M5 � M2 Then I read into Linuxcnc I get error message: � parse_file interp_error Removing the line with G33.1 then no error message so it is something with this row. Program do however execute as expected with G33.1 line even though there is an error message so no real problem. Also execute without an error message if run manually in MDI mode. Use origin/master last commit Mon May 8 16:10:03 2023 +0200 404aa407f136ce91a3e6bf911c7bda54011a74e9 Anybody else had similar problem? Nicklas Karlsson _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
