Re: [Emc-users] Coordinated Spindle - mill
Just to clarify.. To rigid tap you been a b and z... On Wed, Mar 10, 2021, 7:40 PM Ed wrote: > On 3/10/21 2:08 PM, Karl Schmidt wrote: > > I finally have all the hardware working - I built gear pickups + Z .. > > Thanks to Jon Elson's example .. works well - thanks for sharing. > > > > > https://lrak.net/secret/pictures/wells_index/wells_index/2020-02-05_10-37-10_jpg.jpeg.html > > > > > https://lrak.net/secret/pictures/wells_index/wells_index/2020-01-25_15-47-26_jpg.jpeg.html > > > > > > From the pics I see you also have a Wells, what model? I have a > couple of 810's > > > > > > > I'm trying to find a few examples configs as a starting point for > > doing coordination. > > > I did all mine in Pnconf from the menu. Four axis and spindle > encoder. Parts ordered to add variable feed and rapid and VFD control > soon. Right now it is on/off contactors. Rigid taps just fine. > > > > > > It looks like motion.coord-mode OUT tells us that G33 is in effect ? > > > Rigid tapping is G33.1, G33 is different. The Wiki has all this G code > stuff. > > > > > > > There is this in the docs "Spindle-synchronized motion waits for the > > spindle index and spindle at speed pins, so multiple passes line up. > > "not sure what "multiple passes line up" means in this context? > > (Is it waiting some 'N' times for the speed and index to be correct > > before moving?) > > > > When the control sees an spindle index pulse it starts the feed, > stops the feed at spindle reversal and reverses feed to stay in time > with spindle RPM. By using the index pulse it allows the tool to > repeat the operation as long as the starting point remains the same > > > > > > > > Most of the time, I will just use the VS-belt system - trying to see a > > way to turn spindle coordination on and off? I think I might have to > > create a gvcp-panel bit to turn the coordination on and off? At the > > very least I should make an actual spindle speed display.. > > > > The RPMs sent to the VFD will not be the same as the spindle RPM - The > > PID loop should be able to fix that? > > > > .. > > I already fixed a detail on the extremely well written wj200_vfd > > component - I can add an RPM input - or scaling input? > > > > It has a frequency input right now - I was thinking I would add the > > RPM parameter - it would use which ever parameter that isn't set to > > zero. Or, I could add a scaling input.. > > > > (wj200 already has a spindle-at speed output.. ) > > > > Hints - bread-crumbs would be welcome.. > > > > > > ,.,. > > spindle.N.at-speed > > > > motion.coord-error OUT BIT > > > > motion.coord-mode OUT BIT > > > > spindle.N.revs > > > > > > > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Coordinated Spindle - mill
On 3/10/21 2:08 PM, Karl Schmidt wrote: I finally have all the hardware working - I built gear pickups + Z .. Thanks to Jon Elson's example .. works well - thanks for sharing. https://lrak.net/secret/pictures/wells_index/wells_index/2020-02-05_10-37-10_jpg.jpeg.html https://lrak.net/secret/pictures/wells_index/wells_index/2020-01-25_15-47-26_jpg.jpeg.html From the pics I see you also have a Wells, what model? I have a couple of 810's I'm trying to find a few examples configs as a starting point for doing coordination. I did all mine in Pnconf from the menu. Four axis and spindle encoder. Parts ordered to add variable feed and rapid and VFD control soon. Right now it is on/off contactors. Rigid taps just fine. It looks like motion.coord-mode OUT tells us that G33 is in effect ? Rigid tapping is G33.1, G33 is different. The Wiki has all this G code stuff. There is this in the docs "Spindle-synchronized motion waits for the spindle index and spindle at speed pins, so multiple passes line up. " not sure what "multiple passes line up" means in this context? (Is it waiting some 'N' times for the speed and index to be correct before moving?) When the control sees an spindle index pulse it starts the feed, stops the feed at spindle reversal and reverses feed to stay in time with spindle RPM. By using the index pulse it allows the tool to repeat the operation as long as the starting point remains the same Most of the time, I will just use the VS-belt system - trying to see a way to turn spindle coordination on and off? I think I might have to create a gvcp-panel bit to turn the coordination on and off? At the very least I should make an actual spindle speed display.. The RPMs sent to the VFD will not be the same as the spindle RPM - The PID loop should be able to fix that? .. I already fixed a detail on the extremely well written wj200_vfd component - I can add an RPM input - or scaling input? It has a frequency input right now - I was thinking I would add the RPM parameter - it would use which ever parameter that isn't set to zero. Or, I could add a scaling input.. (wj200 already has a spindle-at speed output.. ) Hints - bread-crumbs would be welcome.. ,.,. spindle.N.at-speed motion.coord-error OUT BIT motion.coord-mode OUT BIT spindle.N.revs ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Coordinated Spindle - mill
On 03/10/2021 02:08 PM, Karl Schmidt wrote: I finally have all the hardware working - I built gear pickups + Z .. Thanks to Jon Elson's example .. works well - thanks for sharing. https://lrak.net/secret/pictures/wells_index/wells_index/2020-02-05_10-37-10_jpg.jpeg.html https://lrak.net/secret/pictures/wells_index/wells_index/2020-01-25_15-47-26_jpg.jpeg.html Oh, your setup looks SO much more refined than my slap-dash job! Jon ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] Coordinated Spindle - mill
I finally have all the hardware working - I built gear pickups + Z .. Thanks to Jon Elson's example .. works well - thanks for sharing. https://lrak.net/secret/pictures/wells_index/wells_index/2020-02-05_10-37-10_jpg.jpeg.html https://lrak.net/secret/pictures/wells_index/wells_index/2020-01-25_15-47-26_jpg.jpeg.html I'm trying to find a few examples configs as a starting point for doing coordination. It looks like motion.coord-mode OUT tells us that G33 is in effect ? There is this in the docs "Spindle-synchronized motion waits for the spindle index and spindle at speed pins, so multiple passes line up. "not sure what "multiple passes line up" means in this context? (Is it waiting some 'N' times for the speed and index to be correct before moving?) Most of the time, I will just use the VS-belt system - trying to see a way to turn spindle coordination on and off? I think I might have to create a gvcp-panel bit to turn the coordination on and off? At the very least I should make an actual spindle speed display.. The RPMs sent to the VFD will not be the same as the spindle RPM - The PID loop should be able to fix that? .. I already fixed a detail on the extremely well written wj200_vfd component - I can add an RPM input - or scaling input? It has a frequency input right now - I was thinking I would add the RPM parameter - it would use which ever parameter that isn't set to zero. Or, I could add a scaling input.. (wj200 already has a spindle-at speed output.. ) Hints - bread-crumbs would be welcome.. ,.,. spindle.N.at-speed motion.coord-error OUT BIT motion.coord-mode OUT BIT spindle.N.revs -- Karl Schmidt EMail k...@lrak.net 3209 West 9th Street Ph (785) 979-8397 Lawrence, KS 66049 ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users