Re: [Emc-users] NAMES Backdrop Photos
> To all EMC2 users and enthusiasts: > > > > In coordinating with Dale Grover off list I offered to print up some > backdrops for the EMC presence at NAMES here in Toledo, since there's a > kind > member with a CD duplicator in our midst negating the need for my previous > offer of assistance, and I still wanted to lend a hand. So now I reach > out > to the list for your help - I need PICTURES of your machines! Lots and > lots > of pictures!!! (well not too many.) I'm thinking machines of all shapes > and > sizes, from custom builds to conversions, wood routers to behemoths, > anything that has EMC2 moving it around. The higher res the better, I'm > aiming at 24x36 plots. So clean up your shops, take some good pics and we > can showcase the variety of machines running on EMC2. > I love this idea, and if you get pictures, I would also like to make a section at www.linuxcnc.org where we could properly present them. There is atm a section with user machines in the wiki: http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Case_Studies but these are all pictures for webreview, not for printing. Regards, Alex -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] NAMES Backdrop Photos
>> Greg Michalski wrote: >> > > To all EMC2 users and enthusiasts: > > > > > > > > In coordinating with Dale Grover off list I offered to print up some > > backdrops for the EMC presence at NAMES here in Toledo, since there's a > > kind > > member with a CD duplicator in our midst negating the need for my previous > > offer of assistance, and I still wanted to lend a hand. So now I reach > > out > > to the list for your help - I need PICTURES of your machines! Lots and > > lots > > of pictures!!! (well not too many.) I'm thinking machines of all shapes > > and > > sizes, from custom builds to conversions, wood routers to behemoths, > > anything that has EMC2 moving it around. The higher res the better, I'm > > aiming at 24x36 plots. So clean up your shops, take some good pics and we > > can showcase the variety of machines running on EMC2. > > > > I love this idea, and if you get pictures, I would also like to make a > section at www.linuxcnc.org where we could properly present them. > There is atm a section with user machines in the wiki: > http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Case_Studies > but these are all pictures for webreview, not for printing. > > Regards, > Alex > Everyone - The second email that just popped through made me realize something - if you have a username you use on IRC or other forum include that too _IF_ you want people to know that information. Thanks - I'm probably going to end up with way too much anecdotal information...luckily I am experienced at editing in my meat and potatoes work :--) Greg www.distinctperspectives.com -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] NAMES Backdrop Photos
> -Original Message- > From: Alex Joni [mailto:alex.j...@robcon.ro] > >>Greg Michalski wrote: > > To all EMC2 users and enthusiasts: > > > > > > > > In coordinating with Dale Grover off list I offered to print up some > > backdrops for the EMC presence at NAMES here in Toledo, since there's a > > kind > > member with a CD duplicator in our midst negating the need for my previous > > offer of assistance, and I still wanted to lend a hand. So now I reach > > out > > to the list for your help - I need PICTURES of your machines! Lots and > > lots > > of pictures!!! (well not too many.) I'm thinking machines of all shapes > > and > > sizes, from custom builds to conversions, wood routers to behemoths, > > anything that has EMC2 moving it around. The higher res the better, I'm > > aiming at 24x36 plots. So clean up your shops, take some good pics and we > > can showcase the variety of machines running on EMC2. > > > > I love this idea, and if you get pictures, I would also like to make a > section at www.linuxcnc.org where we could properly present them. > There is atm a section with user machines in the wiki: > http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Case_Studies > but these are all pictures for webreview, not for printing. > > Regards, > Alex > Alex - I will definitely pass them along. I have one email so far but I need to setup an FTP option as his pics must've been too big since the preceeding email didn't come through, just the follow up description email. I am hopeful that we can get a decent number of pics in time for the show, hopefully everyone has their brooms out this weekend...(hint hint HINT) :--) Greg www.distinctperspectives.com -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] NAMES Backdrop Photos
Hello Greg, I tried to send you some pictures right away, but your mail server was apparently so busy that I was told my mail could be delayed for up to 2 days. Please check your mail account, maybe it's overfilled. Large pictues you wished make a lot of megabytes. Peter Blodow At 00:24 14.03.2009, you wrote: >To all EMC2 users and enthusiasts: > > > >In coordinating with Dale Grover off list I offered to print up some >backdrops for the EMC presence at NAMES here in Toledo, since there's a kind >member with a CD duplicator in our midst negating the need for my previous >offer of assistance, and I still wanted to lend a hand. So now I reach out >to the list for your help - I need PICTURES of your machines! Lots and lots >of pictures!!! (well not too many.) I'm thinking machines of all shapes and >sizes, from custom builds to conversions, wood routers to behemoths, >anything that has EMC2 moving it around. The higher res the better, I'm >aiming at 24x36 plots. So clean up your shops, take some good pics and we >can showcase the variety of machines running on EMC2. > > > >Thoughts for additional information to accompany photos (will either be >printed on the sheet or a card/plaque type stickon): > >1. Your name & location (so you can be properly credited) >2. The type of machine (eg: Bridgeport conversion, Self Designed Wood >Router, Cincinnati 5 Axis Mill, Southbend XxZ custom conversion, etc.) >3. System specs (steppers, servos, travels, etc. - whatever you want to >mention - I think vendor plugs should be ok - if not someone please let me >know) >4. Commercial/Production or Hobby machine >5. Basically enough information that whoever is standing at the booth >isn't fielding questions - a web page if you've got one dedicated to your >machine would probably be great too. > > > >Email pics to me off list at : Greg dot Michalski at distinctperspectives >dot com or contact me there if we need to work something out for a large >(nice HIGH res pic) file transfer. > > > >Greg > >www.distinctperspectives.com > > > > > >-- >Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are >powering Web 2.0 with engaging, cross-platform capabilities. Quickly and >easily build your RIAs with Flex Builder, the Eclipse(TM)based development >software that enables intelligent coding and step-through debugging. >Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com >___ >Emc-users mailing list >Emc-users@lists.sourceforge.net >https://lists.sourceforge.net/lists/listinfo/emc-users -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] NAMES Backdrop Photos
I have some neat photos of a fairly unconventional 2 axis machine called a sand table up on my website. Check out www.dubno.com and click on the sand table project (sorry for the crummy url, I'm using frames). - Mike -Original Message- From: Peter blodow [mailto:p.blo...@dreki.de] Sent: Saturday, March 14, 2009 3:54 PM To: Enhanced Machine Controller (EMC) Subject: Re: [Emc-users] NAMES Backdrop Photos Hello Greg, I tried to send you some pictures right away, but your mail server was apparently so busy that I was told my mail could be delayed for up to 2 days. Please check your mail account, maybe it's overfilled. Large pictues you wished make a lot of megabytes. Peter Blodow At 00:24 14.03.2009, you wrote: >To all EMC2 users and enthusiasts: > > > >In coordinating with Dale Grover off list I offered to print up some >backdrops for the EMC presence at NAMES here in Toledo, since there's a kind >member with a CD duplicator in our midst negating the need for my previous >offer of assistance, and I still wanted to lend a hand. So now I reach out >to the list for your help - I need PICTURES of your machines! Lots and lots >of pictures!!! (well not too many.) I'm thinking machines of all shapes and >sizes, from custom builds to conversions, wood routers to behemoths, >anything that has EMC2 moving it around. The higher res the better, I'm >aiming at 24x36 plots. So clean up your shops, take some good pics and we >can showcase the variety of machines running on EMC2. > > > >Thoughts for additional information to accompany photos (will either be >printed on the sheet or a card/plaque type stickon): > >1. Your name & location (so you can be properly credited) >2. The type of machine (eg: Bridgeport conversion, Self Designed Wood >Router, Cincinnati 5 Axis Mill, Southbend XxZ custom conversion, etc.) >3. System specs (steppers, servos, travels, etc. - whatever you want to >mention - I think vendor plugs should be ok - if not someone please let me >know) >4. Commercial/Production or Hobby machine >5. Basically enough information that whoever is standing at the booth >isn't fielding questions - a web page if you've got one dedicated to your >machine would probably be great too. > > > >Email pics to me off list at : Greg dot Michalski at distinctperspectives >dot com or contact me there if we need to work something out for a large >(nice HIGH res pic) file transfer. > > > >Greg > >www.distinctperspectives.com > > > > > >--- --- >Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are >powering Web 2.0 with engaging, cross-platform capabilities. Quickly and >easily build your RIAs with Flex Builder, the Eclipse(TM)based development >software that enables intelligent coding and step-through debugging. >Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com >___ >Emc-users mailing list >Emc-users@lists.sourceforge.net >https://lists.sourceforge.net/lists/listinfo/emc-users -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] NAMES Backdrop Photos
Everyone -
I have setup an FTP account on my website to accept large files (like I
requested) since it seems my mailbox won't accept larger messages (I thought
I had paid for enhanced email but - evidently not).
I don't want to post the log-in information to the list since it is publicly
archived, but contact me off list at Greg Michalski {at]
distinctperspectives (dot) com and I will forward the log in information and
a basic walk through of how to use FTP if you haven't before (don't be
offended at the step by step nature if you are familiar, I wanted to have a
copy/paste and have it applicable to all levels of experience).
So if you have tried to send me something and it bounced contact me at the
email for the instructions or check your mail because I've already responded
to several people with the instructions for FTP.
Thanks for the early support, hopefully it continues and we have a stunning
professional looking display that will make a statement that EMC is robust,
and is here to stay. If (like me...) you haven't previously made any
contributions to opensource development, this is an easy way to get started
by showing off what you've done with the software.
Thanks!
Greg
www.distinctperspectives.com
> -Original Message-
> From: Peter blodow [mailto:p.blo...@dreki.de]
> Sent: Saturday, March 14, 2009 3:54 PM
> To: Enhanced Machine Controller (EMC)
> Subject: Re: [Emc-users] NAMES Backdrop Photos
>
> Hello Greg,
> I tried to send you some pictures right away, but your mail server was
> apparently so busy that I was told my mail could be delayed for up to 2
> days. Please check your mail account, maybe it's overfilled. Large pictues
> you wished make a lot of megabytes.
> Peter Blodow
>
> At 00:24 14.03.2009, you wrote:
> >To all EMC2 users and enthusiasts:
> >
> >
> >
> >In coordinating with Dale Grover off list I offered to print up some
> >backdrops for the EMC presence at NAMES here in Toledo, since there's a
kind
> >member with a CD duplicator in our midst negating the need for my
previous
> >offer of assistance, and I still wanted to lend a hand. So now I reach
out
> >to the list for your help - I need PICTURES of your machines! Lots and
lots
> >of pictures!!! (well not too many.) I'm thinking machines of all shapes
and
> >sizes, from custom builds to conversions, wood routers to behemoths,
> >anything that has EMC2 moving it around. The higher res the better, I'm
> >aiming at 24x36 plots. So clean up your shops, take some good pics and
we
> >can showcase the variety of machines running on EMC2.
> >
> >
> >
> >Thoughts for additional information to accompany photos (will either be
> >printed on the sheet or a card/plaque type stickon):
> >
> >1. Your name & location (so you can be properly credited)
> >2. The type of machine (eg: Bridgeport conversion, Self Designed
Wood
> >Router, Cincinnati 5 Axis Mill, Southbend XxZ custom conversion, etc.)
> >3. System specs (steppers, servos, travels, etc. - whatever you want
to
> >mention - I think vendor plugs should be ok - if not someone please let
me
> >know)
> >4. Commercial/Production or Hobby machine
> >5. Basically enough information that whoever is standing at the
booth
> >isn't fielding questions - a web page if you've got one dedicated to your
> >machine would probably be great too.
> >
> >
> >
> >Email pics to me off list at : Greg dot Michalski at distinctperspectives
> >dot com or contact me there if we need to work something out for a large
> >(nice HIGH res pic) file transfer.
> >
> >
> >
> >Greg
> >
> >www.distinctperspectives.com
> >
> >
> >
> >
> >
>
>---
---
> >Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
> >powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
> >easily build your RIAs with Flex Builder, the Eclipse(TM)based
development
> >software that enables intelligent coding and step-through debugging.
> >Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
> >___
> >Emc-users mailing list
> >Emc-users@lists.sourceforge.net
> >https://lists.sourceforge.net/lists/listinfo/emc-users
>
>
>
--
> Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
> powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
> easily build your RIAs wi
Re: [Emc-users] NAMES Backdrop Photos
Update from the photo front -
Ok, I have now sorted out the multitude of issues which have plagued me from
the start of this endeavor. I knew I had purchased a large mailbox amount
on my hosting package - only problem was when I set it up _I_ didn't allot
it a sufficient size, so instead of a 100MB mailbox I had a 10mb mailbox and
75MB unallocated. To top it all off I had set my client to leave copies on
the server for 5 days so once it filled Saturday into Sunday, it was tits
up.
SO - If you have tried to contact me and gotten a bounce back message or no
response whatsoever, and are still willing to provide images, go ahead and
contact me again. Everyone who has gotten a hold of me has gotten the FTP
instructions and successfully sent images, except for the most recent to be
mailed the instructions (one person). But the box was full from sometime
late Sunday (east coast time).
I apologize for the unprofessionalism this started off with. I made too
many assumptions, thereby making an @$$ out of myself when all I wanted to
do was help and use a talent and equipment at my disposal to promote EMC.
This sort of error would have been catastrophic had it been a full fledged
business (which one day I intend it to be).
So my apologies to everyone, especially those who put up with trying to get
files to me and being patient while I tried working out my bugs. I have a
decent amount of pictures, but would like at least another 5 machines to
showcase. Some of the machines received so far are very inspiring for me in
seeing the creativity not only in the work they are producing but in the
machines themselves.
So to those who haven't donated pics, or have tried and got fed up with the
hassle, I hope you will give it another shot. To those who have - thank
you. Dale is really investing a lot of his time in making the EMC presence
strong and I commend him. I wish my body could stand/sit in one place long
enough to take more shifts on the floor, this is the best way for me to
contribute, so again, one more shot and please accept my humble apologies,
this snafu was all on me.
Yours humbly in open source and open honesty,
Greg Michalski
www.distinctperspectives.com
> -Original Message-
> From: Greg Michalski [mailto:emc2usrl...@distinctperspectives.com]
> Sent: Saturday, March 14, 2009 9:21 PM
> To: 'Enhanced Machine Controller (EMC)'
> Subject: Re: [Emc-users] NAMES Backdrop Photos
>
> Everyone -
>
> I have setup an FTP account on my website to accept large files (like I
> requested) since it seems my mailbox won't accept larger messages (I
thought
> I had paid for enhanced email but - evidently not).
>
> I don't want to post the log-in information to the list since it is
publicly
> archived, but contact me off list at Greg Michalski {at]
> distinctperspectives (dot) com and I will forward the log in information
and
> a basic walk through of how to use FTP if you haven't before (don't be
> offended at the step by step nature if you are familiar, I wanted to have
a
> copy/paste and have it applicable to all levels of experience).
>
> So if you have tried to send me something and it bounced contact me at the
> email for the instructions or check your mail because I've already
responded
> to several people with the instructions for FTP.
>
> Thanks for the early support, hopefully it continues and we have a
stunning
> professional looking display that will make a statement that EMC is
robust,
> and is here to stay. If (like me...) you haven't previously made any
> contributions to opensource development, this is an easy way to get
started
> by showing off what you've done with the software.
>
> Thanks!
>
> Greg
> www.distinctperspectives.com
>
>
> > -Original Message-----
> > From: Peter blodow [mailto:p.blo...@dreki.de]
> > Sent: Saturday, March 14, 2009 3:54 PM
> > To: Enhanced Machine Controller (EMC)
> > Subject: Re: [Emc-users] NAMES Backdrop Photos
> >
> > Hello Greg,
> > I tried to send you some pictures right away, but your mail server was
> > apparently so busy that I was told my mail could be delayed for up to 2
> > days. Please check your mail account, maybe it's overfilled. Large
pictues
> > you wished make a lot of megabytes.
> > Peter Blodow
> >
> > At 00:24 14.03.2009, you wrote:
> > >To all EMC2 users and enthusiasts:
> > >
> > >
> > >
> > >In coordinating with Dale Grover off list I offered to print up some
> > >backdrops for the EMC presence at NAMES here in Toledo, since there's a
> kind
> > >member with a CD duplicator in our midst negating the need for my
> previous
> > >offer of assistance, and I still wanted to lend a hand. So now I
Re: [Emc-users] NAMES Backdrop Photos
Greg Michalski wrote: > Update from the photo front - > > Ok, I have now sorted out the multitude of issues which have plagued me from > the start of this endeavor. I knew I had purchased a large mailbox amount > on my hosting package - only problem was when I set it up _I_ didn't allot > it a sufficient size, so instead of a 100MB mailbox I had a 10mb mailbox and > 75MB unallocated. To top it all off I had set my client to leave copies on > the server for 5 days so once it filled Saturday into Sunday, it was tits > up. > > SO - If you have tried to contact me and gotten a bounce back message or no > response whatsoever, and are still willing to provide images, go ahead and > contact me again. Everyone who has gotten a hold of me has gotten the FTP > instructions and successfully sent images, except for the most recent to be > mailed the instructions (one person). But the box was full from sometime > late Sunday (east coast time). > > I apologize for the unprofessionalism this started off with. I made too > many assumptions, thereby making an @$$ out of myself when all I wanted to > do was help and use a talent and equipment at my disposal to promote EMC. > This sort of error would have been catastrophic had it been a full fledged > business (which one day I intend it to be). > > So my apologies to everyone, especially those who put up with trying to get > files to me and being patient while I tried working out my bugs. I have a > decent amount of pictures, but would like at least another 5 machines to > showcase. Some of the machines received so far are very inspiring for me in > seeing the creativity not only in the work they are producing but in the > machines themselves. > I don't think you owe any apologies - these things happen. I for one am thrilled to see that you are doing this, regardless of any minor hitches. I have some pictures of my EMC2 powered Shoptask lathe/mill on my website at: http://jmkasunich.com/cgi-bin/blosxom/shoptask?flav=index Instead of me dumping a bunch of stuff on you, take a look and let me know if anything looks good. I have the 10 megapixel originals for most if not all of the images... BTW, I'm pretty sure I have the original (rather large) movie file for the variable-pitch, variable-diameter threading. Might be fun to be use that instead of a screensaver. (The YouTube version won't work at the show unless you have a fast internet connection, but the movie version just sits on your disk and runs anywhere.) Regards, John Kasunich -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] NAMES Backdrop Photos
> From: John Kasunich [mailto:jmkasun...@fastmail.fm] > > Greg Michalski wrote: > > Update from the photo front - > > > > Ok, I have now sorted out the multitude of issues which have plagued me from > > the start of this endeavor. I knew I had purchased a large mailbox amount > > on my hosting package - only problem was when I set it up _I_ didn't allot > > it a sufficient size, so instead of a 100MB mailbox I had a 10mb mailbox and > > 75MB unallocated. To top it all off I had set my client to leave copies on > > the server for 5 days so once it filled Saturday into Sunday, it was tits > > up. > > > > SO - If you have tried to contact me and gotten a bounce back message or no > > response whatsoever, and are still willing to provide images, go ahead and > > contact me again. Everyone who has gotten a hold of me has gotten the FTP > > instructions and successfully sent images, except for the most recent to be > > mailed the instructions (one person). But the box was full from sometime > > late Sunday (east coast time). > > > > I apologize for the unprofessionalism this started off with. I made too > > many assumptions, thereby making an @$$ out of myself when all I wanted to > > do was help and use a talent and equipment at my disposal to promote EMC. > > This sort of error would have been catastrophic had it been a full fledged > > business (which one day I intend it to be). > > > > So my apologies to everyone, especially those who put up with trying to get > > files to me and being patient while I tried working out my bugs. I have a > > decent amount of pictures, but would like at least another 5 machines to > > showcase. Some of the machines received so far are very inspiring for me in > > seeing the creativity not only in the work they are producing but in the > > machines themselves. > > > > I don't think you owe any apologies - these things happen. I for one am > thrilled to see that you are doing this, regardless of any minor hitches. > > I have some pictures of my EMC2 powered Shoptask lathe/mill on my > website at: http://jmkasunich.com/cgi-bin/blosxom/shoptask?flav=index > Instead of me dumping a bunch of stuff on you, take a look and let me > know if anything looks good. I have the 10 megapixel originals for most > if not all of the images... > > BTW, I'm pretty sure I have the original (rather large) movie file for > the variable-pitch, variable-diameter threading. Might be fun to be use > that instead of a screensaver. (The YouTube version won't work at the > show unless you have a fast internet connection, but the movie version > just sits on your disk and runs anywhere.) > > Regards, > > John Kasunich > John - Thanks for the encouragement. I'll get a look at your images tomorrow and follow up. It's time to get my beauty rest :P Greg www.distinctperspectives.com -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] NAMES Backdrop Photos
John Kasunich wrote: > BTW, I'm pretty sure I have the original (rather large) movie file for > the variable-pitch, variable-diameter threading. Might be fun to be use > that instead of a screensaver. (The YouTube version won't work at the > show unless you have a fast internet connection, but the movie version > just sits on your disk and runs anywhere.) You can use the DownloadHelper plugin to Firefox to save Youtube videos to your hard drive, to watch them later without a network connection. Of course, there are other reasons to prefer JMK's original movie over the Youtube one. -- Sebastian Kuzminsky -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] NAMES Backdrop Photos
John Kasunich wrote: > BTW, I'm pretty sure I have the original (rather large) movie file for > the variable-pitch, variable-diameter threading. Might be fun to be use > that instead of a screensaver. (The YouTube version won't work at the > show unless you have a fast internet connection, but the movie version > just sits on your disk and runs anywhere.) > If somebody is going to have movies running, I think there is one of Chris' 5-axis machine that ought to be shown, too. I thought that was QUITE cool! Jon -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] NAMES Backdrop Photos
On Mar 16, 2009, at 8:34 PM, Jon Elson wrote: > John Kasunich wrote: >> BTW, I'm pretty sure I have the original (rather large) movie file >> for >> the variable-pitch, variable-diameter threading. Might be fun to >> be use >> that instead of a screensaver. (The YouTube version won't work at >> the >> show unless you have a fast internet connection, but the movie >> version >> just sits on your disk and runs anywhere.) >> > If somebody is going to have movies running, I think there is one of > Chris' 5-axis machine that ought to be shown, too. > I thought that was QUITE cool! > > Jon > Is anyone thinking about support for the backdrop pictures. IIRC > the "old" Names venue was pretty much an open room. Unless you get a booth with a wall you are going to need racks, dividers, etc to hang those beautiful pictures on. Dave > -- > > Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) > are > powering Web 2.0 with engaging, cross-platform capabilities. > Quickly and > easily build your RIAs with Flex Builder, the Eclipse(TM)based > development > software that enables intelligent coding and step-through debugging. > Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] NAMES Backdrop Photos
Note about NAMES, and every other show I have been to lately: Attaching things to the walls or any other part of the facility is not allowed. You must use self supporting displays. Also, the supplied table coverings are thin plastic that is easily torn if you try to slide a heavy object around on your table. The tables are standard folding units that will support a couple of hundred pounds if placed over the leg, but not in the middle. Steve Stallings > -Original Message- > From: Dave Engvall [mailto:dengv...@charter.net] > Sent: Monday, March 16, 2009 10:41 PM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] NAMES Backdrop Photos > > > On Mar 16, 2009, at 8:34 PM, Jon Elson wrote: > > > John Kasunich wrote: > >> BTW, I'm pretty sure I have the original (rather large) movie file > >> for the variable-pitch, variable-diameter threading. > Might be fun to > >> be use that instead of a screensaver. (The YouTube version won't > >> work at the show unless you have a fast internet > connection, but the > >> movie version just sits on your disk and runs anywhere.) > >> > > If somebody is going to have movies running, I think there > is one of > > Chris' 5-axis machine that ought to be shown, too. > > I thought that was QUITE cool! > > > > Jon > > > Is anyone thinking about support for the backdrop pictures. > IIRC the > > "old" Names venue was pretty much an open room. Unless you get > a booth with a wall you are going to need racks, dividers, > etc to hang those beautiful pictures on. > > Dave > > > -- > > > > Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) > > are powering Web 2.0 with engaging, cross-platform capabilities. > > Quickly and > > easily build your RIAs with Flex Builder, the Eclipse(TM)based > > development software that enables intelligent coding and > step-through > > debugging. > > Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com > > ___ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > -- > > Apps built with the Adobe(R) Flex(R) framework and Flex > Builder(TM) are powering Web 2.0 with engaging, > cross-platform capabilities. Quickly and easily build your > RIAs with Flex Builder, the Eclipse(TM)based development > software that enables intelligent coding and step-through debugging. > Download the free 60 day trial. > http://p.sf.net/sfu/www-adobe-com > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] NAMES Backdrop Photos
At 8:41 PM -0700 3/16/09, Dave Engvall wrote: > > Is anyone thinking about support for the backdrop pictures. IIRC > the "old" Names venue was pretty much an open room. Unless you get >a booth with a wall you are going to need racks, dividers, etc to >hang those beautiful pictures on. > >Dave While we're against a wall, I think we're required to have everything freestanding. (I'll try to check.) Besides, I think folks will want to look at the photos up close and read the captions, so we can't have them too far away. We have the space--perhaps the booth is an open U shape? --Dale EMC at NAMES 2009 wiki page: http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?EMC2AtNAMES -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] NAMES Backdrop Photos
NAMES booths are 10' by 10' normally. Booth B15 shows on the floor plan as having a sliver of open space on one side, probably a mandated access to some safety related equipment on the facility wall. Otherwise you have only 10' of frontage for access. This is why I was hoping we could juggle and get 3 adjacent booths for PMDX, PICO, and EMC and thus share open space and allow people to walk through the booth while still having displays on the front. The two supplied tables per booth are 2.5' by 8' and can be arranged as you wish, including as an L that slightly exceeds the 10' side dimension. Putting a table on each side results in an alley 5' wide down the middle, and this gets crowded easily. An open L with one table along the back wall would likely be best, unless the "sliver" is wide enough for people to walk back and forth between booths. Steve Stallings > -Original Message- > From: Dale Grover [mailto:dgro...@redcedar.com] > Sent: Tuesday, March 17, 2009 7:06 AM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] NAMES Backdrop Photos > > At 8:41 PM -0700 3/16/09, Dave Engvall wrote: > > > > Is anyone thinking about support for the backdrop pictures. IIRC > > the "old" Names venue was pretty much an open room. Unless > you get a > >booth with a wall you are going to need racks, dividers, etc to hang > >those beautiful pictures on. > > > >Dave > > While we're against a wall, I think we're required to have > everything freestanding. (I'll try to check.) Besides, I > think folks will want to look at the photos up close and read > the captions, so we can't have them too far away. We have > the space--perhaps the booth is an open U shape? > > --Dale > > EMC at NAMES 2009 wiki page: > http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?EMC2AtNAMES > > -- > > Apps built with the Adobe(R) Flex(R) framework and Flex > Builder(TM) are powering Web 2.0 with engaging, > cross-platform capabilities. Quickly and easily build your > RIAs with Flex Builder, the Eclipse(TM)based development > software that enables intelligent coding and step-through debugging. > Download the free 60 day trial. > http://p.sf.net/sfu/www-adobe-com > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] NAMES Backdrop Photos
Feel free to deposit movies on the FTP site also if movies are desired on site. There's space. As for the hanging/attaching issue, I am mounting all the photos on foam core and typically make an easel base when I do items like this. They can be placed on tables, at the base of tables, or I do have some PVC tube around the house that I could bring down and make an impromptu trellis of sorts. Greg www.distinctperspectives.com > -Original Message- > From: Dave Engvall [mailto:dengv...@charter.net] > Sent: Monday, March 16, 2009 11:41 PM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] NAMES Backdrop Photos > > > On Mar 16, 2009, at 8:34 PM, Jon Elson wrote: > > > John Kasunich wrote: > >> BTW, I'm pretty sure I have the original (rather large) movie file > >> for > >> the variable-pitch, variable-diameter threading. Might be fun to > >> be use > >> that instead of a screensaver. (The YouTube version won't work at > >> the > >> show unless you have a fast internet connection, but the movie > >> version > >> just sits on your disk and runs anywhere.) > >> > > If somebody is going to have movies running, I think there is one of > > Chris' 5-axis machine that ought to be shown, too. > > I thought that was QUITE cool! > > > > Jon > > > Is anyone thinking about support for the backdrop pictures. IIRC > > the "old" Names venue was pretty much an open room. Unless you get > a booth with a wall you are going to need racks, dividers, etc to > hang those beautiful pictures on. > > Dave > > -- > > > > Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) > > are > > powering Web 2.0 with engaging, cross-platform capabilities. > > Quickly and > > easily build your RIAs with Flex Builder, the Eclipse(TM)based > > development > > software that enables intelligent coding and step-through debugging. > > Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com > > ___ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > -- > Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are > powering Web 2.0 with engaging, cross-platform capabilities. Quickly and > easily build your RIAs with Flex Builder, the Eclipse(TM)based development > software that enables intelligent coding and step-through debugging. > Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com > ___ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users -- Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
