RE: Ram upgrade NT4 SP6
I'd have not seen those kind of recommendation, but I'd love the see what Q article describes that you'd need to reapply SP after adding more memory to your system. I'd definitely reset the Virtual Memory settings to your total memory + 100MB and run Exchange Performance Optimizer, however. As far as for reapplying SoftPaq after adding memory does not ring the bell either. When I as at the ASE class a year ago, instructor never said anything like that unless I was looking out the window while he said such a thing. What I remember is that whenever you add memory to your existing system, it's always good go into Compaq System Configuration and save your current settings again (Press F10 when your reboot your server.). I was only told to always reapply Compaq SoftPaq after applying Windows SP on your system, however. Brian -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Tener, Richard Sent: Friday, March 01, 2002 8:16 AM To: Exchange Discussions Subject: Ram upgrade NT4 SP6 Hello, I upgraded the Ram on my server from 512 to 1gig about a week ago. I found that after installing the Ram my server would lockup only when the backup is running. So I put all the backups on hold and my server runs great. I have backup exec 8.5. I emailed veritas about the problem and this is what they suggested: As a rule by Microsoft, whenever you apply any new software or Hardware changes, Microsoft recommends to re-apply Service Pack on top of an existing one. Just try reapplying SP6a on top of an existing one which is most likely to be the cause. Also, since your Virtual Memory size will be as per your old RAM size. You need to reconfigure Virtual Memory size E.g.: try setting it to 600MB You also need to reapply Softpaq which comes with Compaq machines. For further information, please refer the documentation came along with Compaq. Awaiting your feedback. Warm Regards, Vmail Team So my question is has anyone ever had this problem and if so do you think I should do what they suggested above. Thanks Richard Tener _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: Ram upgrade NT4 SP6
After Virtual Mem, optimizer... And it still fails... Perhaps you can isolate BE as the culprit by running NTBACKUP to test. -Original Message- From: Leonard Lee [mailto:[EMAIL PROTECTED]] Sent: Friday, March 01, 2002 8:11 AM To: Exchange Discussions Subject: RE: Ram upgrade NT4 SP6 Did you re-run the Exchange Performance Optimizer after installing the additional RAM? > -Original Message- > From: Tener, Richard [mailto:[EMAIL PROTECTED]] > Sent: 01 March 2002 14:16 > To: Exchange Discussions > Subject: Ram upgrade NT4 SP6 > > > Hello, > > I upgraded the Ram on my server from 512 to 1gig about > a week ago. I > found that after installing the Ram my server would lockup only when > the backup is running. So I put all the backups on hold and my > server runs > great. I have backup exec 8.5. I emailed veritas about the > problem and this > is what they suggested: > > As a rule by Microsoft, whenever you apply any new software or > Hardware changes, Microsoft recommends to re-apply Service Pack on top > of an existing one. > > Just try reapplying SP6a on top of an existing one which is most > likely to be the cause. > > Also, since your Virtual Memory size will be as per your old RAM size. > You need to reconfigure Virtual Memory size > E.g.: try setting it to 600MB > > You also need to reapply Softpaq which comes with Compaq machines. For > further information, please refer the documentation came > along with Compaq. > > Awaiting your feedback. > > > > Warm Regards, > > Vmail Team > > So my question is has anyone ever had this problem and if so do you > think I should do what they suggested above. > > Thanks > Richard Tener > > > > _ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Archives: http://www.swynk.com/sitesearch/search.asp > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin:[EMAIL PROTECTED] > > _ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Archives: http://www.swynk.com/sitesearch/search.asp > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin:[EMAIL PROTECTED] > > _ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Archives: http://www.swynk.com/sitesearch/search.asp > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin:[EMAIL PROTECTED] > > _ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Archives: http://www.swynk.com/sitesearch/search.asp > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin:[EMAIL PROTECTED] > _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: Ram upgrade NT4 SP6
Did you re-run the Exchange Performance Optimizer after installing the additional RAM? > -Original Message- > From: Tener, Richard [mailto:[EMAIL PROTECTED]] > Sent: 01 March 2002 14:16 > To: Exchange Discussions > Subject: Ram upgrade NT4 SP6 > > > Hello, > > I upgraded the Ram on my server from 512 to 1gig about > a week ago. I > found that after installing the Ram my server would lockup > only when the > backup is running. So I put all the backups on hold and my > server runs > great. I have backup exec 8.5. I emailed veritas about the > problem and this > is what they suggested: > > As a rule by Microsoft, whenever you apply any new software > or Hardware > changes, Microsoft recommends to re-apply Service Pack on top of an > existing one. > > Just try reapplying SP6a on top of an existing one which is > most likely to > be the cause. > > Also, since your Virtual Memory size will be as per your old > RAM size. You > need to reconfigure Virtual Memory size > E.g.: try setting it to 600MB > > You also need to reapply Softpaq which comes with Compaq > machines. For > further information, please refer the documentation came > along with Compaq. > > Awaiting your feedback. > > > > Warm Regards, > > Vmail Team > > So my question is has anyone ever had this problem and if so > do you think I > should do what they suggested above. > > Thanks > Richard Tener > > > > _ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Archives: http://www.swynk.com/sitesearch/search.asp > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin:[EMAIL PROTECTED] > > _ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Archives: http://www.swynk.com/sitesearch/search.asp > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin:[EMAIL PROTECTED] > > _ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Archives: http://www.swynk.com/sitesearch/search.asp > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin:[EMAIL PROTECTED] > > _ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Archives: http://www.swynk.com/sitesearch/search.asp > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin:[EMAIL PROTECTED] > _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: Ram upgrade NT4 SP6
Try running memtest86 from www.memtest86.com on it to see if it's a hardware problem. Phil - Phil Randal Network Engineer Herefordshire Council Hereford, UK > -Original Message- > From: Tener, Richard [mailto:[EMAIL PROTECTED]] > Sent: 01 March 2002 14:23 > To: Exchange Discussions > Subject: RE: Ram upgrade NT4 SP6 > > > I havent tried it yet > > > -Original Message- > From: Joyce, Louis [mailto:[EMAIL PROTECTED]] > Sent: Friday, March 01, 2002 9:16 AM > To: Exchange Discussions > Subject: RE: Ram upgrade NT4 SP6 > > > Will it allow you to do an offline backup? > > Regards > > Mr Louis Joyce > Network Support Analyst > Exchange Administrator > BT Ignite eSolutions > > > > > -Original Message- > From: Joyce, Louis [mailto:[EMAIL PROTECTED]] > Sent: 01 March 2002 14:14 > To: Exchange Discussions > Subject: RE: Ram upgrade NT4 SP6 > > > It wasn't what they said. Microsoft said it. > > 'As a rule by Microsoft, whenever you apply any new software > or Hardware > changes, Microsoft recommends-' > > So I would try it. > > Regards > > Mr Louis Joyce > Network Support Analyst > Exchange Administrator > BT Ignite eSolutions > > > > > -Original Message- > From: Tener, Richard [mailto:[EMAIL PROTECTED]] > Sent: 01 March 2002 14:16 > To: Exchange Discussions > Subject: Ram upgrade NT4 SP6 > > > Hello, > > I upgraded the Ram on my server from 512 to 1gig about > a week ago. I > found that after installing the Ram my server would lockup > only when the > backup is running. So I put all the backups on hold and my > server runs > great. I have backup exec 8.5. I emailed veritas about the > problem and this > is what they suggested: > > As a rule by Microsoft, whenever you apply any new software > or Hardware > changes, Microsoft recommends to re-apply Service Pack on top of an > existing one. > > Just try reapplying SP6a on top of an existing one which is > most likely to > be the cause. > > Also, since your Virtual Memory size will be as per your old > RAM size. You > need to reconfigure Virtual Memory size > E.g.: try setting it to 600MB > > You also need to reapply Softpaq which comes with Compaq > machines. For > further information, please refer the documentation came > along with Compaq. > > Awaiting your feedback. > > > > Warm Regards, > > Vmail Team > > So my question is has anyone ever had this problem and if so > do you think I > should do what they suggested above. > > Thanks > Richard Tener > > > > _ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Archives: http://www.swynk.com/sitesearch/search.asp > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin:[EMAIL PROTECTED] > > _ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Archives: http://www.swynk.com/sitesearch/search.asp > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin:[EMAIL PROTECTED] > > _ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Archives: http://www.swynk.com/sitesearch/search.asp > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin:[EMAIL PROTECTED] > > _ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Archives: http://www.swynk.com/sitesearch/search.asp > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin:[EMAIL PROTECTED] > _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: Ram upgrade NT4 SP6
Time is of the essence Mr Tener. If you have a disaster scenario arise in the next few days you will be up a certain creek without a paddle. Try everything. But remember; If at first you don't succeed, don't try skydiving. Regards Mr Louis Joyce Network Support Analyst Exchange Administrator BT Ignite eSolutions -Original Message- From: Tener, Richard [mailto:[EMAIL PROTECTED]] Sent: 01 March 2002 14:23 To: Exchange Discussions Subject: RE: Ram upgrade NT4 SP6 I havent tried it yet -Original Message- From: Joyce, Louis [mailto:[EMAIL PROTECTED]] Sent: Friday, March 01, 2002 9:16 AM To: Exchange Discussions Subject: RE: Ram upgrade NT4 SP6 Will it allow you to do an offline backup? Regards Mr Louis Joyce Network Support Analyst Exchange Administrator BT Ignite eSolutions -Original Message- From: Joyce, Louis [mailto:[EMAIL PROTECTED]] Sent: 01 March 2002 14:14 To: Exchange Discussions Subject: RE: Ram upgrade NT4 SP6 It wasn't what they said. Microsoft said it. 'As a rule by Microsoft, whenever you apply any new software or Hardware changes, Microsoft recommends-' So I would try it. Regards Mr Louis Joyce Network Support Analyst Exchange Administrator BT Ignite eSolutions -Original Message- From: Tener, Richard [mailto:[EMAIL PROTECTED]] Sent: 01 March 2002 14:16 To: Exchange Discussions Subject: Ram upgrade NT4 SP6 Hello, I upgraded the Ram on my server from 512 to 1gig about a week ago. I found that after installing the Ram my server would lockup only when the backup is running. So I put all the backups on hold and my server runs great. I have backup exec 8.5. I emailed veritas about the problem and this is what they suggested: As a rule by Microsoft, whenever you apply any new software or Hardware changes, Microsoft recommends to re-apply Service Pack on top of an existing one. Just try reapplying SP6a on top of an existing one which is most likely to be the cause. Also, since your Virtual Memory size will be as per your old RAM size. You need to reconfigure Virtual Memory size E.g.: try setting it to 600MB You also need to reapply Softpaq which comes with Compaq machines. For further information, please refer the documentation came along with Compaq. Awaiting your feedback. Warm Regards, Vmail Team So my question is has anyone ever had this problem and if so do you think I should do what they suggested above. Thanks Richard Tener _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: Ram upgrade NT4 SP6
Yes one thing I did notice is when I backup the accountants 98 pc and do a registry backup of the sserver it doesnt lockup but when I do a full online backup it does -Original Message- From: Olds, Dominic [mailto:[EMAIL PROTECTED]] Sent: Friday, March 01, 2002 9:21 AM To: Exchange Discussions Subject: RE: Ram upgrade NT4 SP6 Pagefile or virtual memory on NT4 must always be a minimum of the amount of RAM plus 12Meg. Anything less and the OS can't flush the memory if it needs to. Re-applying the SP will make no difference at all unless the machine was not up to date anyway. All you have changed is hardware, no new software has been loaded. However, you SHOULD run the exchange optimizer as this will most likely recommend some changes. I run Veritas 8.6 and know it to be fussy about changes to machines. I suggest you delete and re-create your exchange backup job. This will probably fix it. -Original Message- From: Tener, Richard [mailto:[EMAIL PROTECTED]] Sent: 01 March 2002 14:16 To: Exchange Discussions Subject: Ram upgrade NT4 SP6 Hello, I upgraded the Ram on my server from 512 to 1gig about a week ago. I found that after installing the Ram my server would lockup only when the backup is running. So I put all the backups on hold and my server runs great. I have backup exec 8.5. I emailed veritas about the problem and this is what they suggested: As a rule by Microsoft, whenever you apply any new software or Hardware changes, Microsoft recommends to re-apply Service Pack on top of an existing one. Just try reapplying SP6a on top of an existing one which is most likely to be the cause. Also, since your Virtual Memory size will be as per your old RAM size. You need to reconfigure Virtual Memory size E.g.: try setting it to 600MB You also need to reapply Softpaq which comes with Compaq machines. For further information, please refer the documentation came along with Compaq. Awaiting your feedback. Warm Regards, Vmail Team So my question is has anyone ever had this problem and if so do you think I should do what they suggested above. Thanks Richard Tener _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: Ram upgrade NT4 SP6
Pagefile or virtual memory on NT4 must always be a minimum of the amount of RAM plus 12Meg. Anything less and the OS can't flush the memory if it needs to. Re-applying the SP will make no difference at all unless the machine was not up to date anyway. All you have changed is hardware, no new software has been loaded. However, you SHOULD run the exchange optimizer as this will most likely recommend some changes. I run Veritas 8.6 and know it to be fussy about changes to machines. I suggest you delete and re-create your exchange backup job. This will probably fix it. -Original Message- From: Tener, Richard [mailto:[EMAIL PROTECTED]] Sent: 01 March 2002 14:16 To: Exchange Discussions Subject: Ram upgrade NT4 SP6 Hello, I upgraded the Ram on my server from 512 to 1gig about a week ago. I found that after installing the Ram my server would lockup only when the backup is running. So I put all the backups on hold and my server runs great. I have backup exec 8.5. I emailed veritas about the problem and this is what they suggested: As a rule by Microsoft, whenever you apply any new software or Hardware changes, Microsoft recommends to re-apply Service Pack on top of an existing one. Just try reapplying SP6a on top of an existing one which is most likely to be the cause. Also, since your Virtual Memory size will be as per your old RAM size. You need to reconfigure Virtual Memory size E.g.: try setting it to 600MB You also need to reapply Softpaq which comes with Compaq machines. For further information, please refer the documentation came along with Compaq. Awaiting your feedback. Warm Regards, Vmail Team So my question is has anyone ever had this problem and if so do you think I should do what they suggested above. Thanks Richard Tener _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: Ram upgrade NT4 SP6
I havent tried it yet -Original Message- From: Joyce, Louis [mailto:[EMAIL PROTECTED]] Sent: Friday, March 01, 2002 9:16 AM To: Exchange Discussions Subject: RE: Ram upgrade NT4 SP6 Will it allow you to do an offline backup? Regards Mr Louis Joyce Network Support Analyst Exchange Administrator BT Ignite eSolutions -Original Message- From: Joyce, Louis [mailto:[EMAIL PROTECTED]] Sent: 01 March 2002 14:14 To: Exchange Discussions Subject: RE: Ram upgrade NT4 SP6 It wasn't what they said. Microsoft said it. 'As a rule by Microsoft, whenever you apply any new software or Hardware changes, Microsoft recommends-' So I would try it. Regards Mr Louis Joyce Network Support Analyst Exchange Administrator BT Ignite eSolutions -Original Message- From: Tener, Richard [mailto:[EMAIL PROTECTED]] Sent: 01 March 2002 14:16 To: Exchange Discussions Subject: Ram upgrade NT4 SP6 Hello, I upgraded the Ram on my server from 512 to 1gig about a week ago. I found that after installing the Ram my server would lockup only when the backup is running. So I put all the backups on hold and my server runs great. I have backup exec 8.5. I emailed veritas about the problem and this is what they suggested: As a rule by Microsoft, whenever you apply any new software or Hardware changes, Microsoft recommends to re-apply Service Pack on top of an existing one. Just try reapplying SP6a on top of an existing one which is most likely to be the cause. Also, since your Virtual Memory size will be as per your old RAM size. You need to reconfigure Virtual Memory size E.g.: try setting it to 600MB You also need to reapply Softpaq which comes with Compaq machines. For further information, please refer the documentation came along with Compaq. Awaiting your feedback. Warm Regards, Vmail Team So my question is has anyone ever had this problem and if so do you think I should do what they suggested above. Thanks Richard Tener _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: Ram upgrade NT4 SP6
Will it allow you to do an offline backup? Regards Mr Louis Joyce Network Support Analyst Exchange Administrator BT Ignite eSolutions -Original Message- From: Joyce, Louis [mailto:[EMAIL PROTECTED]] Sent: 01 March 2002 14:14 To: Exchange Discussions Subject: RE: Ram upgrade NT4 SP6 It wasn't what they said. Microsoft said it. 'As a rule by Microsoft, whenever you apply any new software or Hardware changes, Microsoft recommends-' So I would try it. Regards Mr Louis Joyce Network Support Analyst Exchange Administrator BT Ignite eSolutions -Original Message- From: Tener, Richard [mailto:[EMAIL PROTECTED]] Sent: 01 March 2002 14:16 To: Exchange Discussions Subject: Ram upgrade NT4 SP6 Hello, I upgraded the Ram on my server from 512 to 1gig about a week ago. I found that after installing the Ram my server would lockup only when the backup is running. So I put all the backups on hold and my server runs great. I have backup exec 8.5. I emailed veritas about the problem and this is what they suggested: As a rule by Microsoft, whenever you apply any new software or Hardware changes, Microsoft recommends to re-apply Service Pack on top of an existing one. Just try reapplying SP6a on top of an existing one which is most likely to be the cause. Also, since your Virtual Memory size will be as per your old RAM size. You need to reconfigure Virtual Memory size E.g.: try setting it to 600MB You also need to reapply Softpaq which comes with Compaq machines. For further information, please refer the documentation came along with Compaq. Awaiting your feedback. Warm Regards, Vmail Team So my question is has anyone ever had this problem and if so do you think I should do what they suggested above. Thanks Richard Tener _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
Re: Ram upgrade NT4 SP6
I think you mean you should run the optimizer after changing hardware. - Original Message - From: "Tener, Richard" <[EMAIL PROTECTED]> To: "Exchange Discussions" <[EMAIL PROTECTED]> Sent: Friday, March 01, 2002 9:16 AM Subject: Ram upgrade NT4 SP6 > Hello, > > I upgraded the Ram on my server from 512 to 1gig about a week ago. > I found that after installing the Ram my server would lockup only when the > backup is running. So I put all the backups on hold and my server runs > great. I have backup exec 8.5. I emailed veritas about the problem and this > is what they suggested: > > As a rule by Microsoft, whenever you apply any new software or Hardware > changes, Microsoft recommends to re-apply Service Pack on top of an > existing one. > > Just try reapplying SP6a on top of an existing one which is most likely to > be the cause. > > Also, since your Virtual Memory size will be as per your old RAM size. > You need to reconfigure Virtual Memory size > E.g.: try setting it to 600MB > > You also need to reapply Softpaq which comes with Compaq machines. For > further information, please refer the documentation came along with Compaq. > > Awaiting your feedback. > > > > Warm Regards, > > Vmail Team > > So my question is has anyone ever had this problem and if so do you think I > should do what they suggested above. > > Thanks > Richard Tener > > > > _ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Archives: http://www.swynk.com/sitesearch/search.asp > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin:[EMAIL PROTECTED] > _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: Ram upgrade NT4 SP6
It wasn't what they said. Microsoft said it. 'As a rule by Microsoft, whenever you apply any new software or Hardware changes, Microsoft recommends-' So I would try it. Regards Mr Louis Joyce Network Support Analyst Exchange Administrator BT Ignite eSolutions -Original Message- From: Tener, Richard [mailto:[EMAIL PROTECTED]] Sent: 01 March 2002 14:16 To: Exchange Discussions Subject: Ram upgrade NT4 SP6 Hello, I upgraded the Ram on my server from 512 to 1gig about a week ago. I found that after installing the Ram my server would lockup only when the backup is running. So I put all the backups on hold and my server runs great. I have backup exec 8.5. I emailed veritas about the problem and this is what they suggested: As a rule by Microsoft, whenever you apply any new software or Hardware changes, Microsoft recommends to re-apply Service Pack on top of an existing one. Just try reapplying SP6a on top of an existing one which is most likely to be the cause. Also, since your Virtual Memory size will be as per your old RAM size. You need to reconfigure Virtual Memory size E.g.: try setting it to 600MB You also need to reapply Softpaq which comes with Compaq machines. For further information, please refer the documentation came along with Compaq. Awaiting your feedback. Warm Regards, Vmail Team So my question is has anyone ever had this problem and if so do you think I should do what they suggested above. Thanks Richard Tener _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: RAM
Keep a fire extinguisher handy! Ed Crowley MCSE+I MVP Tech Consultant Compaq Computer "There are seldom good technological solutions to behavioral problems." -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Paul Bouzan Sent: Thursday, January 17, 2002 5:35 AM To: Exchange Discussions Subject: RE: RAM Stick 'em in a spare PC and see what the BIOS reports...? PBB ~ndi -Original Message- From: Josefowski, Larry [mailto:[EMAIL PROTECTED]] Sent: 17 January 2002 13:26 To: Exchange Discussions Subject: RE: RAM Check this site out for deciphering the RAM markings... http://www.arstechnica.com/paedia/r/ram_id-1.html Larry Josefowski Network Operations Analyst Conectiv, Inc. -Original Message- From: Kim Schotanus [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 17, 2002 8:10 AM To: Exchange Discussions Subject: OT: RAM Hi I found a box ful of different RAM slots, how can I see what is what? There are about 4 different types in the box and I don't recognise a single one... Kim _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: RAM
That'll do pig. That'll do. -Original Message- From: Andy David [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 17, 2002 7:10 AM To: Exchange Discussions Subject: RE: RAM BAA RAM EWE BAA RAM EWE -Original Message- From: Kim Schotanus [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 17, 2002 8:10 AM To: Exchange Discussions Subject: OT: RAM Hi I found a box ful of different RAM slots, how can I see what is what? There are about 4 different types in the box and I don't recognise a single one... Kim _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] -- The information contained in this email message is privileged and confidential information intended only for the use of the individual or entity to whom it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this message is strictly prohibited. If you have received this email in error, please immediately notify Veronis Suhler Stevenson by telephone (212)935-4990, fax (212)381-8168, or email ([EMAIL PROTECTED]) and delete the message. Thank you. == _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: RAM
Stick 'em in a spare PC and see what the BIOS reports...? PBB ~ndi -Original Message- From: Josefowski, Larry [mailto:[EMAIL PROTECTED]] Sent: 17 January 2002 13:26 To: Exchange Discussions Subject: RE: RAM Check this site out for deciphering the RAM markings... http://www.arstechnica.com/paedia/r/ram_id-1.html Larry Josefowski Network Operations Analyst Conectiv, Inc. -Original Message- From: Kim Schotanus [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 17, 2002 8:10 AM To: Exchange Discussions Subject: OT: RAM Hi I found a box ful of different RAM slots, how can I see what is what? There are about 4 different types in the box and I don't recognise a single one... Kim _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: RAM
Check this site out for deciphering the RAM markings... http://www.arstechnica.com/paedia/r/ram_id-1.html Larry Josefowski Network Operations Analyst Conectiv, Inc. -Original Message- From: Kim Schotanus [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 17, 2002 8:10 AM To: Exchange Discussions Subject: OT: RAM Hi I found a box ful of different RAM slots, how can I see what is what? There are about 4 different types in the box and I don't recognise a single one... Kim _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: RAM
BAA RAM EWE BAA RAM EWE -Original Message- From: Kim Schotanus [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 17, 2002 8:10 AM To: Exchange Discussions Subject: OT: RAM Hi I found a box ful of different RAM slots, how can I see what is what? There are about 4 different types in the box and I don't recognise a single one... Kim _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] -- The information contained in this email message is privileged and confidential information intended only for the use of the individual or entity to whom it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this message is strictly prohibited. If you have received this email in error, please immediately notify Veronis Suhler Stevenson by telephone (212)935-4990, fax (212)381-8168, or email ([EMAIL PROTECTED]) and delete the message. Thank you. == _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]