Re: Send As not working with fake email addresses
what i meant by fake email addresses is a fake sender indeed. For instance all ou printers are set to send notifications to a monitoring mailboxes, they send *as* printern...@acme.com though this email address does not exist, and it works just fine with E2k3. We actually use an open relay receive connector on our LAN as our Exchange Servers are protected by a firewall, but still i cannot send from a non existing email address. Anti-spam is enabled on the hub servers (Recipient and Sender filtering) On Mon, Dec 3, 2012 at 2:05 PM, Joseph L. Casale jcas...@activenetwerx.comwrote: Fake sender, yes. I believe that is what the op wanted, something meaningful to me. jlc -- *From:* Michael B. Smith [mich...@smithcons.com] *Sent:* Monday, December 03, 2012 5:51 AM *To:* MS-Exchange Admin Issues *Subject:* RE: Send As not working with fake email addresses You can’t use fake email addresses in Exchange 2010. If your organization is authoritative for a domain, and the email doesn’t exist, the behavior the OP describes is expected. This is an anti-spam measure. Works as designed and intended. *From:* Joseph L. Casale [mailto:jcas...@activenetwerx.com] *Sent:* Monday, December 3, 2012 6:29 AM *To:* MS-Exchange Admin Issues *Subject:* RE: Send As not working with fake email addresses Add a receive-connector as an application relay only that is scoped to those hosts. -- *From:* Al Rose [arose...@gmail.com] *Sent:* Monday, December 03, 2012 3:17 AM *To:* MS-Exchange Admin Issues *Subject:* Send As not working with fake email addresses Hi, I use to setup applications notifications email addresses to something meaningful to me for sending notifications/reports... For instance, we receive WSUS notifications from w...@acme.com even though the email address w...@acme.com does not exist in our Organization. So far all notifications systems are setup to use our Exchange 2003 server and it works fine now if i try to switch these systems to our 2010 servers i receive this error: The server response was: 5.7.1 Client does not have permissions to send as this sender --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Problem getting Dag group to do initial seed
This just came in - sure you aren't experiencing deja'vu? :) http://blogs.technet.com/b/timmcmic/archive/2012/12/04/exchange-2010-adding-database-copies-to-databases-with-a-single-copy-results-in-copy-status-failed-after-seeding-is-completed.aspx Can't wait to read this. From: bounce-9565624-8066...@lyris.sunbelt-software.com [mailto:bounce-9565624-8066...@lyris.sunbelt-software.com] On Behalf Of Michael B. Smith Sent: 04 December 2012 03:12 To: MS-Exchange Admin Issues Subject: RE: Problem getting Dag group to do initial seed Well, I just hunted for it and can't find it. Long story short: Remove all copies from the passive node. Cleanup all files on the passive node. Add copies using shell with -seedingPostponed. Enable circular logging on each database. Update the database copy to seed it. Disable circular logging if you choose. I'll have a blog post on this soon. Tim Perhaps I just missed it, and you found it! From: Greg Olson [mailto:gol...@markettools.com] Sent: Monday, December 3, 2012 3:42 PM To: MS-Exchange Admin Issues Subject: RE: Problem getting Dag group to do initial seed Thanks Michael I'm searching for it now. -Greg From: Michael B. Smith [mailto:mich...@smithcons.com] Sent: Monday, December 03, 2012 4:52 AM To: MS-Exchange Admin Issues Subject: RE: Problem getting Dag group to do initial seed Tim McMichael has a blog post on this. I can't right now, but I'll hunt it up later if that isn't enough of a hint. From: Sobey, Richard A [mailto:r.so...@imperial.ac.uk]mailto:[mailto:r.so...@imperial.ac.uk] Sent: Monday, December 3, 2012 5:13 AM To: MS-Exchange Admin Issues Subject: RE: Problem getting Dag group to do initial seed Try grabbing a full backup from the active copy and then reseed. We used to get this occasionally - even when it was a brand new database, the initial seeding of a passive copy would fail saying there were log files missing. I opened a PSS call for it, but they determined that AD replication wasn't working properly, so I gave up that route. From: bounce-9565140-8066...@lyris.sunbelt-software.commailto:bounce-9565140-8066...@lyris.sunbelt-software.com [mailto:bounce-9565140-8066...@lyris.sunbelt-software.com] On Behalf Of Greg Olson Sent: 30 November 2012 19:38 To: MS-Exchange Admin Issues Subject: Problem getting Dag group to do initial seed Hi Everyone, So here's my issue, I'm trying to get an initial seed of a few databases (Exchange 2010 SP1) from our office in NJ over to our DR site in SF. I have 7 db's ranging in size from 8gb to 41gb, and I have managed to get two of them (a 12gb and a 34gb) to do the initial replication, but the rest seem to just keep failing with an error similar to this: The required log file 43887 for NJ-Users-U-Z\XXXMailServer is missing on the active copy. If you removed the log file, please replace it. If the log file is lost, the database copy will need to be reseeded using Update-MailboxDatabaseCop There is approx. 70ms of latency, and a 10mb circuit between locations, and it seems to do the copy over just fine, but then they always error with something similar to the above. Any ideas on how to get this working? I've checked and the backups are not running during the transfer time as well. Thanks, -Greg Olson --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: disconnected mailbox not accessible by new account
That worked! Thank you jb From: Brandon Shanks [mailto:anudewal...@gmail.com] Sent: Tuesday, December 04, 2012 11:18 AM To: MS-Exchange Admin Issues Subject: Re: disconnected mailbox not accessible by new account Jason, Try running Clean-MailboxDatabase a second time, now that their mailbox have been attached. I've seen this a few times in our environment with SP2 installed. Brandon On Tue, Dec 4, 2012 at 10:04 AM, Jason Benway benw...@jsjcorp.commailto:benw...@jsjcorp.com wrote: I disconnect a mailbox, ran clean-mailboxdatase so it showed up in the disconnected mailboxes. Connected the disconnect mailbox to a new AD account (that did not have a mailbox) But the user is getting errors when opening outlook, the outlook profile gets created and finds the mailbox but the user gets this error: Cannot open your default email folder. You must connect to exchange with current profile before you can synchronize your folders with your ost. I had him try OWA and it says his account is disabled ??!?? Jason Benway Data Center Architect JSJ Corporation 616-847-8474tel:616-847-8474 --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Problem getting Dag group to do initial seed
That's perfect, thanks Richard and Michael! :) -Greg From: Sobey, Richard A [mailto:r.so...@imperial.ac.uk] Sent: Tuesday, December 04, 2012 8:01 AM To: MS-Exchange Admin Issues Subject: RE: Problem getting Dag group to do initial seed This just came in - sure you aren't experiencing deja'vu? :) http://blogs.technet.com/b/timmcmic/archive/2012/12/04/exchange-2010-adding-database-copies-to-databases-with-a-single-copy-results-in-copy-status-failed-after-seeding-is-completed.aspx Can't wait to read this. From: bounce-9565624-8066...@lyris.sunbelt-software.commailto:bounce-9565624-8066...@lyris.sunbelt-software.com [mailto:bounce-9565624-8066...@lyris.sunbelt-software.com]mailto:[mailto:bounce-9565624-8066...@lyris.sunbelt-software.com] On Behalf Of Michael B. Smith Sent: 04 December 2012 03:12 To: MS-Exchange Admin Issues Subject: RE: Problem getting Dag group to do initial seed Well, I just hunted for it and can't find it. Long story short: Remove all copies from the passive node. Cleanup all files on the passive node. Add copies using shell with -seedingPostponed. Enable circular logging on each database. Update the database copy to seed it. Disable circular logging if you choose. I'll have a blog post on this soon. Tim Perhaps I just missed it, and you found it! From: Greg Olson [mailto:gol...@markettools.com]mailto:[mailto:gol...@markettools.com] Sent: Monday, December 3, 2012 3:42 PM To: MS-Exchange Admin Issues Subject: RE: Problem getting Dag group to do initial seed Thanks Michael I'm searching for it now. -Greg From: Michael B. Smith [mailto:mich...@smithcons.com] Sent: Monday, December 03, 2012 4:52 AM To: MS-Exchange Admin Issues Subject: RE: Problem getting Dag group to do initial seed Tim McMichael has a blog post on this. I can't right now, but I'll hunt it up later if that isn't enough of a hint. From: Sobey, Richard A [mailto:r.so...@imperial.ac.uk]mailto:[mailto:r.so...@imperial.ac.uk] Sent: Monday, December 3, 2012 5:13 AM To: MS-Exchange Admin Issues Subject: RE: Problem getting Dag group to do initial seed Try grabbing a full backup from the active copy and then reseed. We used to get this occasionally - even when it was a brand new database, the initial seeding of a passive copy would fail saying there were log files missing. I opened a PSS call for it, but they determined that AD replication wasn't working properly, so I gave up that route. From: bounce-9565140-8066...@lyris.sunbelt-software.commailto:bounce-9565140-8066...@lyris.sunbelt-software.com [mailto:bounce-9565140-8066...@lyris.sunbelt-software.com] On Behalf Of Greg Olson Sent: 30 November 2012 19:38 To: MS-Exchange Admin Issues Subject: Problem getting Dag group to do initial seed Hi Everyone, So here's my issue, I'm trying to get an initial seed of a few databases (Exchange 2010 SP1) from our office in NJ over to our DR site in SF. I have 7 db's ranging in size from 8gb to 41gb, and I have managed to get two of them (a 12gb and a 34gb) to do the initial replication, but the rest seem to just keep failing with an error similar to this: The required log file 43887 for NJ-Users-U-Z\XXXMailServer is missing on the active copy. If you removed the log file, please replace it. If the log file is lost, the database copy will need to be reseeded using Update-MailboxDatabaseCop There is approx. 70ms of latency, and a 10mb circuit between locations, and it seems to do the copy over just fine, but then they always error with something similar to the above. Any ideas on how to get this working? I've checked and the backups are not running during the transfer time as well. Thanks, -Greg Olson --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: Problem getting Dag group to do initial seed
I asked Tim why he hadn't posted it yet. He and I discussed it back in July. :P He said oops and got it out today. :) From: Greg Olson [mailto:gol...@markettools.com] Sent: Tuesday, December 4, 2012 2:24 PM To: MS-Exchange Admin Issues Subject: RE: Problem getting Dag group to do initial seed That's perfect, thanks Richard and Michael! :) -Greg From: Sobey, Richard A [mailto:r.so...@imperial.ac.uk] Sent: Tuesday, December 04, 2012 8:01 AM To: MS-Exchange Admin Issues Subject: RE: Problem getting Dag group to do initial seed This just came in - sure you aren't experiencing deja'vu? :) http://blogs.technet.com/b/timmcmic/archive/2012/12/04/exchange-2010-adding-database-copies-to-databases-with-a-single-copy-results-in-copy-status-failed-after-seeding-is-completed.aspx Can't wait to read this. From: bounce-9565624-8066...@lyris.sunbelt-software.commailto:bounce-9565624-8066...@lyris.sunbelt-software.com [mailto:bounce-9565624-8066...@lyris.sunbelt-software.com]mailto:[mailto:bounce-9565624-8066...@lyris.sunbelt-software.com] On Behalf Of Michael B. Smith Sent: 04 December 2012 03:12 To: MS-Exchange Admin Issues Subject: RE: Problem getting Dag group to do initial seed Well, I just hunted for it and can't find it. Long story short: Remove all copies from the passive node. Cleanup all files on the passive node. Add copies using shell with -seedingPostponed. Enable circular logging on each database. Update the database copy to seed it. Disable circular logging if you choose. I'll have a blog post on this soon. Tim Perhaps I just missed it, and you found it! From: Greg Olson [mailto:gol...@markettools.com]mailto:[mailto:gol...@markettools.com] Sent: Monday, December 3, 2012 3:42 PM To: MS-Exchange Admin Issues Subject: RE: Problem getting Dag group to do initial seed Thanks Michael I'm searching for it now. -Greg From: Michael B. Smith [mailto:mich...@smithcons.com] Sent: Monday, December 03, 2012 4:52 AM To: MS-Exchange Admin Issues Subject: RE: Problem getting Dag group to do initial seed Tim McMichael has a blog post on this. I can't right now, but I'll hunt it up later if that isn't enough of a hint. From: Sobey, Richard A [mailto:r.so...@imperial.ac.uk]mailto:[mailto:r.so...@imperial.ac.uk] Sent: Monday, December 3, 2012 5:13 AM To: MS-Exchange Admin Issues Subject: RE: Problem getting Dag group to do initial seed Try grabbing a full backup from the active copy and then reseed. We used to get this occasionally - even when it was a brand new database, the initial seeding of a passive copy would fail saying there were log files missing. I opened a PSS call for it, but they determined that AD replication wasn't working properly, so I gave up that route. From: bounce-9565140-8066...@lyris.sunbelt-software.commailto:bounce-9565140-8066...@lyris.sunbelt-software.com [mailto:bounce-9565140-8066...@lyris.sunbelt-software.com] On Behalf Of Greg Olson Sent: 30 November 2012 19:38 To: MS-Exchange Admin Issues Subject: Problem getting Dag group to do initial seed Hi Everyone, So here's my issue, I'm trying to get an initial seed of a few databases (Exchange 2010 SP1) from our office in NJ over to our DR site in SF. I have 7 db's ranging in size from 8gb to 41gb, and I have managed to get two of them (a 12gb and a 34gb) to do the initial replication, but the rest seem to just keep failing with an error similar to this: The required log file 43887 for NJ-Users-U-Z\XXXMailServer is missing on the active copy. If you removed the log file, please replace it. If the log file is lost, the database copy will need to be reseeded using Update-MailboxDatabaseCop There is approx. 70ms of latency, and a 10mb circuit between locations, and it seems to do the copy over just fine, but then they always error with something similar to the above. Any ideas on how to get this working? I've checked and the backups are not running during the transfer time as well. Thanks, -Greg Olson --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: disconnected mailbox not accessible by new account
And be aware that Clean-MailboxDatabase is gone in Exchange 2013. From: Jason Benway [mailto:benw...@jsjcorp.com] Sent: Tuesday, December 4, 2012 12:03 PM To: MS-Exchange Admin Issues Subject: RE: disconnected mailbox not accessible by new account That worked! Thank you jb From: Brandon Shanks [mailto:anudewal...@gmail.com] Sent: Tuesday, December 04, 2012 11:18 AM To: MS-Exchange Admin Issues Subject: Re: disconnected mailbox not accessible by new account Jason, Try running Clean-MailboxDatabase a second time, now that their mailbox have been attached. I've seen this a few times in our environment with SP2 installed. Brandon On Tue, Dec 4, 2012 at 10:04 AM, Jason Benway benw...@jsjcorp.commailto:benw...@jsjcorp.com wrote: I disconnect a mailbox, ran clean-mailboxdatase so it showed up in the disconnected mailboxes. Connected the disconnect mailbox to a new AD account (that did not have a mailbox) But the user is getting errors when opening outlook, the outlook profile gets created and finds the mailbox but the user gets this error: Cannot open your default email folder. You must connect to exchange with current profile before you can synchronize your folders with your ost. I had him try OWA and it says his account is disabled ??!?? Jason Benway Data Center Architect JSJ Corporation 616-847-8474tel:616-847-8474 --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: disconnected mailbox not accessible by new account
*sigh* From: Michael B. Smith [mailto:mich...@smithcons.com] Sent: Tuesday, December 04, 2012 2:08 PM To: MS-Exchange Admin Issues Subject: RE: disconnected mailbox not accessible by new account And be aware that Clean-MailboxDatabase is gone in Exchange 2013. From: Jason Benway [mailto:benw...@jsjcorp.com] Sent: Tuesday, December 4, 2012 12:03 PM To: MS-Exchange Admin Issues Subject: RE: disconnected mailbox not accessible by new account That worked! Thank you jb From: Brandon Shanks [mailto:anudewal...@gmail.com] Sent: Tuesday, December 04, 2012 11:18 AM To: MS-Exchange Admin Issues Subject: Re: disconnected mailbox not accessible by new account Jason, Try running Clean-MailboxDatabase a second time, now that their mailbox have been attached. I've seen this a few times in our environment with SP2 installed. Brandon On Tue, Dec 4, 2012 at 10:04 AM, Jason Benway benw...@jsjcorp.commailto:benw...@jsjcorp.com wrote: I disconnect a mailbox, ran clean-mailboxdatase so it showed up in the disconnected mailboxes. Connected the disconnect mailbox to a new AD account (that did not have a mailbox) But the user is getting errors when opening outlook, the outlook profile gets created and finds the mailbox but the user gets this error: Cannot open your default email folder. You must connect to exchange with current profile before you can synchronize your folders with your ost. I had him try OWA and it says his account is disabled ??!?? Jason Benway Data Center Architect JSJ Corporation 616-847-8474tel:616-847-8474 --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist
RE: disconnected mailbox not accessible by new account
That sucks, as we move mailboxes from one account to another quite often in our environment. Oh well, we are going from 2007 to 2010 early next year, not 2013. Regards, Don Guyer Catholic Health East - Information Technology Enterprise Directory Messaging Services 3805 West Chester Pike, Suite 100, Newtown Square, Pa 19073 email: dgu...@che.orgmailto:dgu...@che.org Office: 610.550.3595 | Cell: 610.955.6528 | Fax: 610.271.9440 For immediate assistance, please open a Service Desk ticket or call the helpdesk @ 610-492-3839. [cid:image001.jpg@01CDD238.F2EDBA80] From: Maglinger, Paul [mailto:pmaglin...@scvl.com] Sent: Tuesday, December 04, 2012 3:54 PM To: MS-Exchange Admin Issues Subject: RE: disconnected mailbox not accessible by new account *sigh* From: Michael B. Smith [mailto:mich...@smithcons.com] Sent: Tuesday, December 04, 2012 2:08 PM To: MS-Exchange Admin Issues Subject: RE: disconnected mailbox not accessible by new account And be aware that Clean-MailboxDatabase is gone in Exchange 2013. From: Jason Benway [mailto:benw...@jsjcorp.com] Sent: Tuesday, December 4, 2012 12:03 PM To: MS-Exchange Admin Issues Subject: RE: disconnected mailbox not accessible by new account That worked! Thank you jb From: Brandon Shanks [mailto:anudewal...@gmail.com] Sent: Tuesday, December 04, 2012 11:18 AM To: MS-Exchange Admin Issues Subject: Re: disconnected mailbox not accessible by new account Jason, Try running Clean-MailboxDatabase a second time, now that their mailbox have been attached. I've seen this a few times in our environment with SP2 installed. Brandon On Tue, Dec 4, 2012 at 10:04 AM, Jason Benway benw...@jsjcorp.commailto:benw...@jsjcorp.com wrote: I disconnect a mailbox, ran clean-mailboxdatase so it showed up in the disconnected mailboxes. Connected the disconnect mailbox to a new AD account (that did not have a mailbox) But the user is getting errors when opening outlook, the outlook profile gets created and finds the mailbox but the user gets this error: Cannot open your default email folder. You must connect to exchange with current profile before you can synchronize your folders with your ost. I had him try OWA and it says his account is disabled ??!?? Jason Benway Data Center Architect JSJ Corporation 616-847-8474tel:616-847-8474 --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist Confidentiality Notice: This e-mail, including any attachments is the property of Catholic Health East and is intended for the sole use of the intended recipient(s). It may contain information that is privileged and confidential. Any unauthorized review, use, disclosure, or distribution is prohibited. If you are not the intended recipient, please delete this message, and reply to the sender regarding the error in a separate email. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelistinline: image001.jpg
RE: disconnected mailbox not accessible by new account
I'm fighting the good fight, but it is an uphill battle. Unfortunately, no one in TAP noticed it until after RTM. That makes it much more challenging. From: Guyer, Don [mailto:dgu...@che.org] Sent: Tuesday, December 4, 2012 4:07 PM To: MS-Exchange Admin Issues Subject: RE: disconnected mailbox not accessible by new account That sucks, as we move mailboxes from one account to another quite often in our environment. Oh well, we are going from 2007 to 2010 early next year, not 2013. Regards, Don Guyer Catholic Health East - Information Technology Enterprise Directory Messaging Services 3805 West Chester Pike, Suite 100, Newtown Square, Pa 19073 email: dgu...@che.orgmailto:dgu...@che.org Office: 610.550.3595 | Cell: 610.955.6528 | Fax: 610.271.9440 For immediate assistance, please open a Service Desk ticket or call the helpdesk @ 610-492-3839. [Description: Description: Description: InfoService-Logo240] From: Maglinger, Paul [mailto:pmaglin...@scvl.com] Sent: Tuesday, December 04, 2012 3:54 PM To: MS-Exchange Admin Issues Subject: RE: disconnected mailbox not accessible by new account *sigh* From: Michael B. Smith [mailto:mich...@smithcons.com] Sent: Tuesday, December 04, 2012 2:08 PM To: MS-Exchange Admin Issues Subject: RE: disconnected mailbox not accessible by new account And be aware that Clean-MailboxDatabase is gone in Exchange 2013. From: Jason Benway [mailto:benw...@jsjcorp.com] Sent: Tuesday, December 4, 2012 12:03 PM To: MS-Exchange Admin Issues Subject: RE: disconnected mailbox not accessible by new account That worked! Thank you jb From: Brandon Shanks [mailto:anudewal...@gmail.com] Sent: Tuesday, December 04, 2012 11:18 AM To: MS-Exchange Admin Issues Subject: Re: disconnected mailbox not accessible by new account Jason, Try running Clean-MailboxDatabase a second time, now that their mailbox have been attached. I've seen this a few times in our environment with SP2 installed. Brandon On Tue, Dec 4, 2012 at 10:04 AM, Jason Benway benw...@jsjcorp.commailto:benw...@jsjcorp.com wrote: I disconnect a mailbox, ran clean-mailboxdatase so it showed up in the disconnected mailboxes. Connected the disconnect mailbox to a new AD account (that did not have a mailbox) But the user is getting errors when opening outlook, the outlook profile gets created and finds the mailbox but the user gets this error: Cannot open your default email folder. You must connect to exchange with current profile before you can synchronize your folders with your ost. I had him try OWA and it says his account is disabled ??!?? Jason Benway Data Center Architect JSJ Corporation 616-847-8474tel:616-847-8474 --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist Confidentiality Notice: This e-mail, including any attachments is the property of Catholic Health East and is intended for the sole use of the intended recipient(s). It may contain information that is privileged and confidential. Any unauthorized review, use, disclosure, or distribution is prohibited. If you are not the intended recipient, please delete this message, and reply to the sender regarding the error in a separate email. --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelistinline: image001.jpg
RE: disconnected mailbox not accessible by new account
Atta boy, MBS. By the power of Grayskull! LOL Did I just type that?! Regards, Don Guyer Catholic Health East - Information Technology Enterprise Directory Messaging Services 3805 West Chester Pike, Suite 100, Newtown Square, Pa 19073 email: dgu...@che.orgmailto:dgu...@che.org Office: 610.550.3595 | Cell: 610.955.6528 | Fax: 610.271.9440 For immediate assistance, please open a Service Desk ticket or call the helpdesk @ 610-492-3839. [cid:image001.jpg@01CDD23B.771D1330] From: Michael B. Smith [mailto:mich...@smithcons.com] Sent: Tuesday, December 04, 2012 4:14 PM To: MS-Exchange Admin Issues Subject: RE: disconnected mailbox not accessible by new account I'm fighting the good fight, but it is an uphill battle. Unfortunately, no one in TAP noticed it until after RTM. That makes it much more challenging. From: Guyer, Don [mailto:dgu...@che.org] Sent: Tuesday, December 4, 2012 4:07 PM To: MS-Exchange Admin Issues Subject: RE: disconnected mailbox not accessible by new account That sucks, as we move mailboxes from one account to another quite often in our environment. Oh well, we are going from 2007 to 2010 early next year, not 2013. Regards, Don Guyer Catholic Health East - Information Technology Enterprise Directory Messaging Services 3805 West Chester Pike, Suite 100, Newtown Square, Pa 19073 email: dgu...@che.orgmailto:dgu...@che.org Office: 610.550.3595 | Cell: 610.955.6528 | Fax: 610.271.9440 For immediate assistance, please open a Service Desk ticket or call the helpdesk @ 610-492-3839. [cid:image001.jpg@01CDD23B.771D1330] From: Maglinger, Paul [mailto:pmaglin...@scvl.com] Sent: Tuesday, December 04, 2012 3:54 PM To: MS-Exchange Admin Issues Subject: RE: disconnected mailbox not accessible by new account *sigh* From: Michael B. Smith [mailto:mich...@smithcons.com] Sent: Tuesday, December 04, 2012 2:08 PM To: MS-Exchange Admin Issues Subject: RE: disconnected mailbox not accessible by new account And be aware that Clean-MailboxDatabase is gone in Exchange 2013. From: Jason Benway [mailto:benw...@jsjcorp.com] Sent: Tuesday, December 4, 2012 12:03 PM To: MS-Exchange Admin Issues Subject: RE: disconnected mailbox not accessible by new account That worked! Thank you jb From: Brandon Shanks [mailto:anudewal...@gmail.com] Sent: Tuesday, December 04, 2012 11:18 AM To: MS-Exchange Admin Issues Subject: Re: disconnected mailbox not accessible by new account Jason, Try running Clean-MailboxDatabase a second time, now that their mailbox have been attached. I've seen this a few times in our environment with SP2 installed. Brandon On Tue, Dec 4, 2012 at 10:04 AM, Jason Benway benw...@jsjcorp.commailto:benw...@jsjcorp.com wrote: I disconnect a mailbox, ran clean-mailboxdatase so it showed up in the disconnected mailboxes. Connected the disconnect mailbox to a new AD account (that did not have a mailbox) But the user is getting errors when opening outlook, the outlook profile gets created and finds the mailbox but the user gets this error: Cannot open your default email folder. You must connect to exchange with current profile before you can synchronize your folders with your ost. I had him try OWA and it says his account is disabled ??!?? Jason Benway Data Center Architect JSJ Corporation 616-847-8474tel:616-847-8474 --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.commailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist Confidentiality Notice: This e-mail, including any attachments is the property of Catholic Health East and is intended for the sole use of the intended recipient(s). It may contain information that is privileged and confidential. Any unauthorized review, use, disclosure, or distribution is prohibited. If you are not the intended recipient, please delete this message, and reply to the sender regarding the error in a separate email. --- To manage subscriptions click here:
RE: disconnected mailbox not accessible by new account
Got Cartoon Network up on the iPad, eh? From: Guyer, Don [mailto:dgu...@che.org] Sent: Tuesday, December 04, 2012 4:22 PM To: MS-Exchange Admin Issues Subject: RE: disconnected mailbox not accessible by new account Atta boy, MBS. By the power of Grayskull! LOL Did I just type that?! Regards, Don Guyer Catholic Health East - Information Technology Enterprise Directory Messaging Services 3805 West Chester Pike, Suite 100, Newtown Square, Pa 19073 email: dgu...@che.org mailto:dgu...@che.org Office: 610.550.3595 | Cell: 610.955.6528 | Fax: 610.271.9440 For immediate assistance, please open a Service Desk ticket or call the helpdesk @ 610-492-3839. From: Michael B. Smith [mailto:mich...@smithcons.com] Sent: Tuesday, December 04, 2012 4:14 PM To: MS-Exchange Admin Issues Subject: RE: disconnected mailbox not accessible by new account I'm fighting the good fight, but it is an uphill battle. Unfortunately, no one in TAP noticed it until after RTM. That makes it much more challenging. From: Guyer, Don [mailto:dgu...@che.org] Sent: Tuesday, December 4, 2012 4:07 PM To: MS-Exchange Admin Issues Subject: RE: disconnected mailbox not accessible by new account That sucks, as we move mailboxes from one account to another quite often in our environment. Oh well, we are going from 2007 to 2010 early next year, not 2013. Regards, Don Guyer Catholic Health East - Information Technology Enterprise Directory Messaging Services 3805 West Chester Pike, Suite 100, Newtown Square, Pa 19073 email: dgu...@che.org mailto:dgu...@che.org Office: 610.550.3595 | Cell: 610.955.6528 | Fax: 610.271.9440 For immediate assistance, please open a Service Desk ticket or call the helpdesk @ 610-492-3839. From: Maglinger, Paul [mailto:pmaglin...@scvl.com] Sent: Tuesday, December 04, 2012 3:54 PM To: MS-Exchange Admin Issues Subject: RE: disconnected mailbox not accessible by new account *sigh* From: Michael B. Smith [mailto:mich...@smithcons.com] Sent: Tuesday, December 04, 2012 2:08 PM To: MS-Exchange Admin Issues Subject: RE: disconnected mailbox not accessible by new account And be aware that Clean-MailboxDatabase is gone in Exchange 2013. From: Jason Benway [mailto:benw...@jsjcorp.com] Sent: Tuesday, December 4, 2012 12:03 PM To: MS-Exchange Admin Issues Subject: RE: disconnected mailbox not accessible by new account That worked! Thank you jb From: Brandon Shanks [mailto:anudewal...@gmail.com] Sent: Tuesday, December 04, 2012 11:18 AM To: MS-Exchange Admin Issues Subject: Re: disconnected mailbox not accessible by new account Jason, Try running Clean-MailboxDatabase a second time, now that their mailbox have been attached. I've seen this a few times in our environment with SP2 installed. Brandon On Tue, Dec 4, 2012 at 10:04 AM, Jason Benway benw...@jsjcorp.com mailto:benw...@jsjcorp.com wrote: I disconnect a mailbox, ran clean-mailboxdatase so it showed up in the disconnected mailboxes. Connected the disconnect mailbox to a new AD account (that did not have a mailbox) But the user is getting errors when opening outlook, the outlook profile gets created and finds the mailbox but the user gets this error: Cannot open your default email folder. You must connect to exchange with current profile before you can synchronize your folders with your ost. I had him try OWA and it says his account is disabled ??!?? Jason Benway Data Center Architect JSJ Corporation 616-847-8474 tel:616-847-8474 --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com mailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com mailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com mailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com mailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist --- To manage subscriptions click here: http://lyris.sunbelt-software.com/read/my_forums/ or send an email to listmana...@lyris.sunbeltsoftware.com mailto:listmana...@lyris.sunbeltsoftware.com with the body: unsubscribe exchangelist Confidentiality Notice: This e-mail, including any attachments is the property of Catholic Health East and is intended for the sole use of the intended recipient(s). It may contain information that is privileged and confidential. Any