Re: [expert] libstdc++ deps
On Sat, 2002-10-05 at 12:30, Jason Guidry wrote: error: failed dependencies: libstdc++.so.4(GLIBCPP_3.1) is needed by audacity-1.0.0-3mdk This is on a fresh install of 9.0, and I have the regular ol' libstdc++.so.4 dep taken care of. several google searches yield nothing I think you may find the discussions from cooker interesting and possibly helpful in this case. You can review it (thus far) here: http://marc.theaimsgroup.com/?l=mandrake-cookerm=103348475709463w=2 One suggestion is to use hackaudacity it seems. -- Cheers dg signature.asc Description: This is a digitally signed message part
Re: [expert] mt command
On Sat, 2002-10-05 at 12:50, Dennis Cardinale wrote: [...] (magnetic tape) command? From what package is mt installed? mt-st-0.7-1mdk.i586 [...] -- Cheers dg signature.asc Description: This is a digitally signed message part
Re: [expert] LM9.0: Removable Media icon in KDE
On Fri, 2002-10-04 at 13:48, Charlie wrote: [] I installed Dolphin my desktop came with _no_ icons at all at first boot. The enable desktop icons button is checked. I've had this happen, where there aren't any desktop icons 3 times out of 11 install tests. I wasn't paying attention at the time, (or better put, didn't care to look into it) as I was looking for other critical things to see if all was okay. Clearly, it can and does happen. Why? I'm not yet sure. [] Charlie Edmonton,AB,Canada Registered user 244963 at http://counter.li.org Fortune's Exercising Truths: -- Cheers dg signature.asc Description: This is a digitally signed message part
Re: [expert] NTFS read-write enabled by default...safe?
On Fri, 2002-10-04 at 19:42, John Quigley wrote: Hello, I recently helped a friend install mandrake. I believe he was installing mandrake 8.2, but anyway the kernel version installed was 2.4.18-6mdk. When he mounted his windows partition using the command: mount -t ntfs /dev/hde1 /mnt/windows It was mounted read-write. Is this a safe default? Everything I've read about ntfs says that this mode is dangerous. both read and write are still considered experimental. Write is _extremely_ experimental and frankly, dangerous. Having said that, I use read/write against windows XP NTFS (NTFS5) and have not experienced any problems _yet_. Your mileage may vary. -- Cheers dg signature.asc Description: This is a digitally signed message part
Re: [expert] Installing Apps in 9.0
On Sun, 29 Sep 2002 18:05:00 +0100 Alastair Scott [EMAIL PROTECTED] wrote: [..] The trick is to install 2.96 as well as 3.2 by doing, as root, The software is looking for 2.95 not 2.96. This might be an issue to the software. In my experience software demanding 2.95 does not accept 2.96. urpmi gcc2.96 urpmi gcc2.96-cpp urpmi gcc2.96-colorgcc urpmi gcc2.96-c++ Now, before you do that, can someone confirm having gcc 2.96 and gcc 3.2 installed at the same time won't cause problems? It shoudln't as past releases have had more than one version available. The issue _might_ be, if indeed the software accepts 2.96, will it also accept it when it won't be the default version. 3.2 will still be linked to gcc. -- Cheers dg Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] ISP specific list
On Thu, 2002-09-26 at 09:47, Scott St. John wrote: [...] What IRC channels and where? irc.openprojects.net #Mandrake [...] -- Cheers dg Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] info on pine
On Saturday 16 March 2002 07:10 pm, you wrote: Having not used pine, would some kind soul impart how it stacks up against mutt. Is pine a command line program or is it GUI? Pine is nice, I've used it for years. Mutt offers some different features. Both are run CLI. -- Cheers dg Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Dns Script
On Saturday 09 March 2002 01:33, you wrote: Hey everybody. The thing is this. I have a dnsalias with a dynamic Ip. When my Ip change, I run a phyton script to update de Ip in the Dns page that in this case will be www.dyndns.org. The question is this: Is there a way of making a script or a cron job to automatically update the Ip, or running the phyton script but only when the ip changes?, Thanks in advance Martin Install ez-ipupdate which comes with 8.1 (8.0 to I _think_). Read the docs carefuly though, you begin to spam dyndns and they most likely will lock you out. ez-ipupdate, when configured correctly will only update to dyndns.org when your ip actualy has changed. -- Cheers dg Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
RE: [expert] DHCP Server + DHCP Client
You need dhcpcd for your cable/dsl and dhcp _if_ your going to server IP's to other machines on your lan deg Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
Re: [expert] Choosing between Kde and Gnome with startx
On Sun, 2002-02-24 at 13:54, dfox wrote: [..] What I've done is to put lines for both window environments in my $HOME/.xinitrc. A quick edit with vi, comment out the one you want to run and put a # comment just before the line you don't want to run, then save startx. You could also use Xtart. Which will show you a curses menu of the WM's installed and allow you to select which one to use. I've been using it for a couple months now, I like it. deg Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] vim and tilde
On Sunday 10 February 2002 23:53, you wrote: !, Seems as though vim is leaving temporary files whenever I edit anything ie: I edit 'test.txt' and it leaves 'test.txt~' in the current directory, no matter what I do. Anyone know how to fix this? A couple hours of google searching turned up nothing (but I am tired, so you never know) http://www.vim.org/html/options.html#%27backup%27 Discusses how to toggle the backup option Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] rtl8139 based network card
On Monday 11 February 2002 17:58, you wrote: At 08:17 AM 2/11/2002 -0800, Larry Sword wrote: Norman wrote: What is in your /etc/modules.conf file? [root@norman3 /root]# cat /etc/modules.conf pre-install pcmcia_core CARDMGR_OPTS=-f /etc/rc.d/init.d/pcmcia start alias eth0 rtl8139 ++ options rtl8139too irq=10 1. You don't need this line, probably results in conflict. +++ alias usb-interface usb-ohci As I recall, the driver is 8139too.o, NOT rtl8139.o or rtl8139too.o rtl8139 can be confusing. The old driver was named as such and there is still much out there referencing same. The driver to use is actualy 8139too as Lee suggested as it's the current incarnation, and it works, unlike it's predicessor which didn't work all that well. deg Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] weather program
On Tuesday 18 December 2001 19:01, you wrote: Do any of you folks know of a weather program for linux. Also I would like to find a talking clock program. RB Personaly I use wmweather. http://nis-www.lanl.gov/~mgh/WindowMaker/DockApps.shtml Includes many docapps for windowmaker but work just fine under kde and gnome from my experience. Someone might know of a kde or gnome specific one though. I've never bothered to look anyfurther then the above. deg -- modesty, n.: Being comfortable that others will discover your greatness. --- 7:15pm up 3:07, 2 users, load average: 0.04, 0.06, 0.01 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] AMD 760MP setup...
On Monday 17 December 2001 19:39, you wrote: Everyone I need your help here. I just build a new computer using the Tyan Tiger MP S2460 motherboard. For those of you that don't know, this motherboard has the AMD 760MP chipset which supports the dual Athlon MP processors. Anyway I have the Tiger MP with dual AthonMP 1.2 gig processors which sounds all good, but I'm having some problems getting Mandrake 8.1 setup. I install Mandrake 8.1 with the default kernel, and it seems that the chipset is not full recognized. So, I upgraded to the newest kernel from Cooker 2.4.16.3. Now I'm not sure this helped because HardDrake still shows unknown AMD components, and my Maxtor 40 gig hardrive is only running using UDMA 33 when it should be using UDMA 100. I sure would greatly appreciate any help that anyone could offer. UDMA 100? or ATA100? Also could you please tell me what rpms that I need to upgrade when installing a new kernel. I dowloaded the smp kernel and the headers, and used the following commands: rpm -ivh kernel version rpm -ivh kernel headers If this is not right please let me know as well. Thanks. -- The state of innocence contains the germs of all future sin. -- Alexandre Arnoux, Etudes et caprices --- 8:22pm up 3:39, 2 users, load average: 0.00, 0.02, 0.00 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Removing StarOffice?
On Saturday 15 December 2001 11:55, David Guntner wrote: Is removing StarOffice a simple matter of just removing /usr/local/office52 (which is where I installed it), or does the installer do other things behind the scenes that need to be undone as well? Maybe a /uninstall option or something? --Dave urpme staroffice if you installed the rpm version Darwin -- Chicken Little only has to be right once. --- 12:04pm up 2:59, 2 users, load average: 0.00, 0.00, 0.00 Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] LM 8.1/Win2k dual boot clock issue
On Monday 10 December 2001 10:12, you wrote: Hello, I have an HP Omnibook DBoot w/ win2k (for work - we use exchange :( ) and LM 8.1 (for me). I made a mistake when installing LM. When asked by the installer weither my system clock was set to GMT I said yes (it's not). Soo every time I go back and forth between OS's, i chokes my clock and neither one stays correct. I am wondering how to fix this...I went into the clock setting in LM, but did not see a way to change the system clock offset. Mandrake Control Center in Mandrake. Go to date/time settings. Change time to correct time, make sure your time zone is correct. When your done and click ok, it will again ask you about gmt. Select no at that point and you will be relying on the timezone (bios) rather than gmt or utc. Cheers Any help would be appreciated, Thanks, Greg _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com -- Cheers Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] LM 8.1 can not write to othet HD
On Sunday 09 December 2001 17:46, you wrote: From: Irwan Setia HI, I use LM 8.1 on my box. I have 2 SCSI HD, 1 IDE HD and 2 removable jaz 1 GB. I install Win XP on sda and LM 8.1 on hda, using LILO to boot the system. the problem is I can read/ mount to other HD using LM 8.1 but I can not write them. anybody can help me? Try as root. Thanks -- Cheers Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] viruses, worms, trojans, html, pgp sigs
On Friday 07 December 2001 18:41, you wrote: Carroll Grigsby wrote: Well, there's always format c: /u (U)nconditional Carroll, Just out of curiosity, what is the /u parameter? (I stopped at Win95 (for the most part).) Happy Friday, Thanks! Randy Kramer Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Extras in the DVD release
On November 25, 2001 11:53 am, you wrote: snip I think MandrakeSoft is getting the message. They have recieved much grief since 8.0 ProSuite. Now with this release they probably will be considering changing their wording on thier offers. Anyway, we should likely let this thread die, we are all Mandrake users and obviously enjoy it or we wouldn't be on this list =) regards. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] GCC 3.0
On Saturday 24 November 2001 18:20, you wrote: So sprach »Jose Luis Vazquez Gonzalez« am 2001-11-24 um 18:49:22 +0100 : Hi, Has someone upgraded to gcc 3.0.x? Yep. how? urpmi gcc3 Dunno if it's in 8.1, but it's for sure in cooker. yep it's in the download version of 8.1 for sure. gcc 3.0.1. Alexander Skwar Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com