Re: [expert] Question on KDE
On Sun, 2003-03-02 at 10:44, James Sparenberg wrote: > On Sun, 2003-03-02 at 10:36, Kiran wrote: > > > Like I said X worked well, so did gdm for that matter. There really are > > > only 3 things I want out of kde Konqueror, kdm and kate. So I tried an > > > experiment. Since installing from the cooker wasn't working (I'm > > > running cooker on this box.) I backed off to the rc1 disk version (the > > > last one that worked that I can still get ) and poof ... everything > > > worked. When and if they get the hdlist.cz matching the actual files in > > > cooker I'll let the upgrade run again and see what happens. More and > > > More it seems to be related to the latest qt3. I filed the bug report > > > but was told they couldn't duplicate my problem. > > > > Did you try to install the entire KDE packeage? Not sure if this would > > help with this problem, but it might. other than that it does look like > > something is broken/missing from your install of cooker...perhaps it is > > QT3. Does RC1 use the same QT version?? if not try downgrading to it and > > see if that helps. Cooker seems to be using libqt-3.1.1.1-13 as of > > 02/25/03 and rc1 was last updated 02/18/03. > > > > I've got > > kdelibs-3.1-4mdk > kdelibs-common-3.1-4mdk > kdebase-3.1-7mdk > kdeadmin-3.1-3mdk > > > + to satisfy dependencies. > arts-1.1.0-1mdk > libarts-1.1.0-1mdk > libqt3-common-3.1.1-8mdk > libqt3-3.1.1-8mdk > krootwarning-9.1-1mdk > mdklaunchhelp-9.1-2mdk > > This is the combo that works.. > > I'm going to try the upgrade again to see if it rebreaks.. then backoff > qt3 to see if it's the cause. I'm just waiting for the hdlist.cz to > match the rpms on the site (shouldn't take too long.) > > James > > Kiran, It most definitly is libqt3 and or libqt3-common . I did the urpmi --update --auto --auto-select it upgraded all of my kde apps above. I then tried to run kcontrol it crashed immediately Same error as before that it could not communicate with the DCOPserver then I did rpm -e qt3 qt3-common and then I did rpm -Uvh libqt3-3.1.1-8mdk.i586.rpm Libqt3-common-3.1.1-8mdk.i586.rpm the I ran kcontrol again from the command line and it worked. Don't know but near as I can tell for my hardware etc. qt3 is hosed. James Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Question on KDE
On Sun, 2003-03-02 at 10:36, Kiran wrote: > > Like I said X worked well, so did gdm for that matter. There really are > > only 3 things I want out of kde Konqueror, kdm and kate. So I tried an > > experiment. Since installing from the cooker wasn't working (I'm > > running cooker on this box.) I backed off to the rc1 disk version (the > > last one that worked that I can still get ) and poof ... everything > > worked. When and if they get the hdlist.cz matching the actual files in > > cooker I'll let the upgrade run again and see what happens. More and > > More it seems to be related to the latest qt3. I filed the bug report > > but was told they couldn't duplicate my problem. > > Did you try to install the entire KDE packeage? Not sure if this would > help with this problem, but it might. other than that it does look like > something is broken/missing from your install of cooker...perhaps it is > QT3. Does RC1 use the same QT version?? if not try downgrading to it and > see if that helps. Cooker seems to be using libqt-3.1.1.1-13 as of > 02/25/03 and rc1 was last updated 02/18/03. > I've got kdelibs-3.1-4mdk kdelibs-common-3.1-4mdk kdebase-3.1-7mdk kdeadmin-3.1-3mdk + to satisfy dependencies. arts-1.1.0-1mdk libarts-1.1.0-1mdk libqt3-common-3.1.1-8mdk libqt3-3.1.1-8mdk krootwarning-9.1-1mdk mdklaunchhelp-9.1-2mdk This is the combo that works.. I'm going to try the upgrade again to see if it rebreaks.. then backoff qt3 to see if it's the cause. I'm just waiting for the hdlist.cz to match the rpms on the site (shouldn't take too long.) James > -- > kiran > Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Question on KDE
> Like I said X worked well, so did gdm for that matter. There really are > only 3 things I want out of kde Konqueror, kdm and kate. So I tried an > experiment. Since installing from the cooker wasn't working (I'm > running cooker on this box.) I backed off to the rc1 disk version (the > last one that worked that I can still get ) and poof ... everything > worked. When and if they get the hdlist.cz matching the actual files in > cooker I'll let the upgrade run again and see what happens. More and > More it seems to be related to the latest qt3. I filed the bug report > but was told they couldn't duplicate my problem. Did you try to install the entire KDE packeage? Not sure if this would help with this problem, but it might. other than that it does look like something is broken/missing from your install of cooker...perhaps it is QT3. Does RC1 use the same QT version?? if not try downgrading to it and see if that helps. Cooker seems to be using libqt-3.1.1.1-13 as of 02/25/03 and rc1 was last updated 02/18/03. -- kiran signature.asc Description: This is a digitally signed message part
Re: [expert] Question on KDE
On Sun, 2003-03-02 at 05:32, Kiran wrote: > Did you '--force --nodeps' the install?? Nope since I'd removed everything via urpme rpm -e and then using rm -Rf I removed anything and everything left behind. Then I did urpmi kdebase-kdm (which is what I actually want running) and said yes to everything it wanted to install > > if so you may need to find a dependency. > > Or try XFdrake. > it may reset something that was broken in the configs with the upgrade. Like I said X worked well, so did gdm for that matter. There really are only 3 things I want out of kde Konqueror, kdm and kate. So I tried an experiment. Since installing from the cooker wasn't working (I'm running cooker on this box.) I backed off to the rc1 disk version (the last one that worked that I can still get ) and poof ... everything worked. When and if they get the hdlist.cz matching the actual files in cooker I'll let the upgrade run again and see what happens. More and More it seems to be related to the latest qt3. I filed the bug report but was told they couldn't duplicate my problem. James > > > > On Fri, 2003-02-28 at 22:34, James Sparenberg wrote: > > All, > > > >I've suddenly lost kde It won't start anything and the only error > > I get is a core dump. It happened when I upgraded to the latest 3.1 > > kdm kcontrol nothing will start. But if I switch (and I did ) to gdm > > ...everything but kde runs. So I removed all of kde... all of qt all > > the dot files ... and still the same thing. No errors just a core > > dump. > > > > Next I tried to start it from a command line (kcontrol) I get possible > > errors. Well they are errors just that it's possible they may indicate > > something. > > > > Xlib: extension "RENDER" missing on display ":0.0". > > DCOP aborting call from 'anonymous-12856' to 'kcontrol' > > ERROR: KUniqueApplication: DCOP communication error! > > > > Now the Xlib error should indicate that I don't have font aliasing > > working ok... it works elsewhere but for the moment ok and > > shouldn't stop it. The second one seems to indicate that DCOP doesn't > > work... When I carefully and completely removed kde all libs and qt that > > should have been gone. Then a new install of kdebase should have > > restored it > > > > The question is ... any ideas where else to look? I'm not good at core > > dumps so I don't get much out of it > > > > James > > > > > > > > > > > > > > > Want to buy your Pack or Services from MandrakeSoft? > > Go to http://www.mandrakestore.com > > > > > __ > > Want to buy your Pack or Services from MandrakeSoft? > Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Question on KDE
Did you '--force --nodeps' the install?? if so you may need to find a dependency. Or try XFdrake. it may reset something that was broken in the configs with the upgrade. On Fri, 2003-02-28 at 22:34, James Sparenberg wrote: > All, > >I've suddenly lost kde It won't start anything and the only error > I get is a core dump. It happened when I upgraded to the latest 3.1 > kdm kcontrol nothing will start. But if I switch (and I did ) to gdm > ...everything but kde runs. So I removed all of kde... all of qt all > the dot files ... and still the same thing. No errors just a core > dump. > > Next I tried to start it from a command line (kcontrol) I get possible > errors. Well they are errors just that it's possible they may indicate > something. > > Xlib: extension "RENDER" missing on display ":0.0". > DCOP aborting call from 'anonymous-12856' to 'kcontrol' > ERROR: KUniqueApplication: DCOP communication error! > > Now the Xlib error should indicate that I don't have font aliasing > working ok... it works elsewhere but for the moment ok and > shouldn't stop it. The second one seems to indicate that DCOP doesn't > work... When I carefully and completely removed kde all libs and qt that > should have been gone. Then a new install of kdebase should have > restored it > > The question is ... any ideas where else to look? I'm not good at core > dumps so I don't get much out of it > > James > > > > > > > Want to buy your Pack or Services from MandrakeSoft? > Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Question on KDE
On Sat, 2003-03-01 at 10:00, Damian Gatabria wrote: > On Saturday 01 de March 2003 01:34, James Sparenberg wrote: > > All, > > > >I've suddenly lost kde It won't start anything and the only error > > I get is a core dump. It happened when I upgraded to the latest 3.1 > > kdm kcontrol nothing will start. But if I switch (and I did ) to gdm > > ...everything but kde runs. So I removed all of kde... all of qt all > > the dot files ... and still the same thing. No errors just a core > > dump. > > > > Next I tried to start it from a command line (kcontrol) I get possible > > errors. Well they are errors just that it's possible they may indicate > > something. > > > > Xlib: extension "RENDER" missing on display ":0.0". > > DCOP aborting call from 'anonymous-12856' to 'kcontrol' > > ERROR: KUniqueApplication: DCOP communication error! > > > > Now the Xlib error should indicate that I don't have font aliasing > > working ok... it works elsewhere but for the moment ok and > > shouldn't stop it. The second one seems to indicate that DCOP doesn't > > work... When I carefully and completely removed kde all libs and qt that > > should have been gone. Then a new install of kdebase should have > > restored it > > > > The question is ... any ideas where else to look? I'm not good at core > > dumps so I don't get much out of it > > > > James > > Try wiping out all temp directories. A bad/old socket file may > be confusing DCOP. Let me try and see what happens. > Damian > > > > __ > > Want to buy your Pack or Services from MandrakeSoft? > Go to http://www.mandrakestore.com Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Question on KDE
On Saturday 01 de March 2003 01:34, James Sparenberg wrote: > All, > >I've suddenly lost kde It won't start anything and the only error > I get is a core dump. It happened when I upgraded to the latest 3.1 > kdm kcontrol nothing will start. But if I switch (and I did ) to gdm > ...everything but kde runs. So I removed all of kde... all of qt all > the dot files ... and still the same thing. No errors just a core > dump. > > Next I tried to start it from a command line (kcontrol) I get possible > errors. Well they are errors just that it's possible they may indicate > something. > > Xlib: extension "RENDER" missing on display ":0.0". > DCOP aborting call from 'anonymous-12856' to 'kcontrol' > ERROR: KUniqueApplication: DCOP communication error! > > Now the Xlib error should indicate that I don't have font aliasing > working ok... it works elsewhere but for the moment ok and > shouldn't stop it. The second one seems to indicate that DCOP doesn't > work... When I carefully and completely removed kde all libs and qt that > should have been gone. Then a new install of kdebase should have > restored it > > The question is ... any ideas where else to look? I'm not good at core > dumps so I don't get much out of it > > James Try wiping out all temp directories. A bad/old socket file may be confusing DCOP. Damian Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Question on KDE
Sorry, no guru here so no idea too :-(( But... when I want to open a full kde2 environment through command I do: 1) kwin & (window manager) 2) kdeinit & (some basic kde stuff) 3) kicker & (panel bar) 4) kdesktop & (obvious) Might be this solves about missing render... El sáb, 01-03-2003 a las 05:34, James Sparenberg escribió: > All, > >I've suddenly lost kde It won't start anything and the only error > I get is a core dump. It happened when I upgraded to the latest 3.1 > kdm kcontrol nothing will start. But if I switch (and I did ) to gdm > ...everything but kde runs. So I removed all of kde... all of qt all > the dot files ... and still the same thing. No errors just a core > dump. > > Next I tried to start it from a command line (kcontrol) I get possible > errors. Well they are errors just that it's possible they may indicate > something. > > Xlib: extension "RENDER" missing on display ":0.0". > DCOP aborting call from 'anonymous-12856' to 'kcontrol' > ERROR: KUniqueApplication: DCOP communication error! > > Now the Xlib error should indicate that I don't have font aliasing > working ok... it works elsewhere but for the moment ok and > shouldn't stop it. The second one seems to indicate that DCOP doesn't > work... When I carefully and completely removed kde all libs and qt that > should have been gone. Then a new install of kdebase should have > restored it > > The question is ... any ideas where else to look? I'm not good at core > dumps so I don't get much out of it > > James > > > > > > > Want to buy your Pack or Services from MandrakeSoft? > Go to http://www.mandrakestore.com -- Diego Dominguez __/\__ | | Andalucia /\ Spain \/ |__ __| \/ ___ Yahoo! Móviles Personaliza tu móvil con tu logo y melodía favorito en http://moviles.yahoo.es Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Question on KDE
All, I've suddenly lost kde It won't start anything and the only error I get is a core dump. It happened when I upgraded to the latest 3.1 kdm kcontrol nothing will start. But if I switch (and I did ) to gdm ...everything but kde runs. So I removed all of kde... all of qt all the dot files ... and still the same thing. No errors just a core dump. Next I tried to start it from a command line (kcontrol) I get possible errors. Well they are errors just that it's possible they may indicate something. Xlib: extension "RENDER" missing on display ":0.0". DCOP aborting call from 'anonymous-12856' to 'kcontrol' ERROR: KUniqueApplication: DCOP communication error! Now the Xlib error should indicate that I don't have font aliasing working ok... it works elsewhere but for the moment ok and shouldn't stop it. The second one seems to indicate that DCOP doesn't work... When I carefully and completely removed kde all libs and qt that should have been gone. Then a new install of kdebase should have restored it The question is ... any ideas where else to look? I'm not good at core dumps so I don't get much out of it James Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com