Re: [expert] 9.2 and GIMP ???
On Tue, 2003-10-21 at 02:12, Richard Bown wrote: > On Tue, 2003-10-21 at 04:14, James Sparenberg wrote: > > On Mon, 2003-10-20 at 15:02, Richard Bown wrote: > > > Hi > > > this is minor but damn annoying > > > > > > After trying to print a jpeg from gimp-1.2.5-6mdk to an Epson C82 > > > printer using CUPS, instead of a nice piccy of a swiss steam engine I > > > got > > > 1 line of about 20 characters mix of german, greek , math symbols. > > > > > > on page after page after page. > > > Flushed the printer queueno change > > > removed printer for config.no change > > > disconnected the printer..no change > > > power cycled the printer eventually stops > > > reconnected the printer to PC. it starts again !!! > > > reboot the PC its still going > > > power down the pc it stopped > > > > > > > > > reconfigure the printer in CUPs > > > and print a test page.working > > > Thats the first time I've ever seen that.. > > > OK it may be a coincidence that 9.2 is involved as the other factor is > > > the new kernel 2.4.22 > > > > > > has anyone seen similar ??? > > > > > > Richard > > > > One question. How many different "drivers" did drakprint have for your > > printer. One option could be to try one of the other ones. If this > > doesn't work. bugs.mandrakesoft.com is your friend. *grin* > > > > James > > > > > Just checked there are now only 2 drivers for the Epson C82 > the one I was using CUPS +GIMP > and ghostscript + gimp, Ive now changed to the latter, and wait see if > it happens again. > This does look like a wayward process, as once the printer is removed > from the config it should stop , but this does'nt, it just keeps spew > ing out of the parport... maybe worth trying the printer on the USB > port. > I does mean I have to watch whats being printed, cant just send it > remotely and trust.. > > else you end up with as much paper as you loaded all with a quarter line > of garbage on the top of each sheet. > Whats really strange is that rebooting dos'nt stop it onlt power down.. > > Richard Your being caught by the print buffer on the printer. The job could well be gone from the computer and totally in the print buffer on the printer itself. In such a case nothing you do on the comp will affect the printer (unless you have a locally mounted printer and the software from the manf needed to clear this buffer.) James Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] 9.2 and GIMP ???
On Tue, 2003-10-21 at 04:14, James Sparenberg wrote: > On Mon, 2003-10-20 at 15:02, Richard Bown wrote: > > Hi > > this is minor but damn annoying > > > > After trying to print a jpeg from gimp-1.2.5-6mdk to an Epson C82 > > printer using CUPS, instead of a nice piccy of a swiss steam engine I > > got > > 1 line of about 20 characters mix of german, greek , math symbols. > > > > on page after page after page. > > Flushed the printer queueno change > > removed printer for config.no change > > disconnected the printer..no change > > power cycled the printer eventually stops > > reconnected the printer to PC. it starts again !!! > > reboot the PC its still going > > power down the pc it stopped > > > > > > reconfigure the printer in CUPs > > and print a test page.working > > Thats the first time I've ever seen that.. > > OK it may be a coincidence that 9.2 is involved as the other factor is > > the new kernel 2.4.22 > > > > has anyone seen similar ??? > > > > Richard > > One question. How many different "drivers" did drakprint have for your > printer. One option could be to try one of the other ones. If this > doesn't work. bugs.mandrakesoft.com is your friend. *grin* > > James > > Just checked there are now only 2 drivers for the Epson C82 the one I was using CUPS +GIMP and ghostscript + gimp, Ive now changed to the latter, and wait see if it happens again. This does look like a wayward process, as once the printer is removed from the config it should stop , but this does'nt, it just keeps spew ing out of the parport... maybe worth trying the printer on the USB port. I does mean I have to watch whats being printed, cant just send it remotely and trust.. else you end up with as much paper as you loaded all with a quarter line of garbage on the top of each sheet. Whats really strange is that rebooting dos'nt stop it onlt power down.. Richard > > > __ > Want to buy your Pack or Services from MandrakeSoft? > Go to http://www.mandrakestore.com -- Richard Bown <[EMAIL PROTECTED]> Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] 9.2 and GIMP ???
On Mon, 2003-10-20 at 15:02, Richard Bown wrote: > Hi > this is minor but damn annoying > > After trying to print a jpeg from gimp-1.2.5-6mdk to an Epson C82 > printer using CUPS, instead of a nice piccy of a swiss steam engine I > got > 1 line of about 20 characters mix of german, greek , math symbols. > > on page after page after page. > Flushed the printer queueno change > removed printer for config.no change > disconnected the printer..no change > power cycled the printer eventually stops > reconnected the printer to PC. it starts again !!! > reboot the PC its still going > power down the pc it stopped > > > reconfigure the printer in CUPs > and print a test page.working > Thats the first time I've ever seen that.. > OK it may be a coincidence that 9.2 is involved as the other factor is > the new kernel 2.4.22 > > has anyone seen similar ??? > > Richard One question. How many different "drivers" did drakprint have for your printer. One option could be to try one of the other ones. If this doesn't work. bugs.mandrakesoft.com is your friend. *grin* James Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] 9.2 and GIMP ???
Richard Bown wrote: Hi this is minor but damn annoying After trying to print a jpeg from gimp-1.2.5-6mdk to an Epson C82 printer using CUPS, instead of a nice piccy of a swiss steam engine I got 1 line of about 20 characters mix of german, greek , math symbols. on page after page after page. Flushed the printer queueno change removed printer for config.no change disconnected the printer..no change power cycled the printer eventually stops reconnected the printer to PC. it starts again !!! reboot the PC its still going power down the pc it stopped reconfigure the printer in CUPs and print a test page.working Thats the first time I've ever seen that.. OK it may be a coincidence that 9.2 is involved as the other factor is the new kernel 2.4.22 has anyone seen similar ??? Yes.yes I have :) Well, I don't know if it is the same but it has a lot of common elements: http://qa.mandrakesoft.com/show_bug.cgi?id=6135 Rolf Richard Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com